1. Kupu Whakataki
Welcome to the user manual for your new ENGWE T14 Folding Electric Bike. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your ebike. Please read it thoroughly before your first ride and keep it for future reference.
Figure 1: The ENGWE T14 Folding Electric Bike, showcasing its compact folded form and ready-to-ride configuration.
2. Tatūnga me te Runanga
Your ENGWE T14 electric bike comes partially assembled. Follow these steps to complete the setup:
- Wewete pouaka: Carefully remove all components from the packaging. Ensure all included components such as the kickstand, mudguard, bell, and tool kit are present.
- Te Whakatuwhera i te Pahikara:
- Locate the main frame hinge and release the safety latch.
- Unfold the frame until it locks into place. Secure the safety latch.
- Adjust the handlebar stem to the upright position and secure its latch.
- Adjust the seat post height to a comfortable riding position and tighten the quick-release clamp.
- Tāutanga Pedal: Identify the left (L) and right (R) pedals. Thread them into the crank arms by hand, then tighten securely with the provided tool. Note that the left pedal threads counter-clockwise.
- Utu Pūhiko Tuatahi: Before first use, fully charge the 48V 10Ah lithium battery. Connect the charger to the bike's charging port and then to a power outlet. The indicator light on the charger will change when fully charged.
Figure 2: The removable 48V 10Ah battery, designed for fast charging and extended range.
3. Operating Your Ebike
The ENGWE T14 offers versatile riding experiences with its multiple modes and intuitive controls.
3.1 Aratau Whakaeke
- Aratau Hiko Parakore: Engage the throttle for motor-only propulsion (0% - 99% power output). Ideal for effortless cruising.
- Pedal Assist Mode (Auxiliary): The motor provides assistance as you pedal (0% - 50% power). This mode extends range and reduces effort.
- Fitness Riding Mode: The motor is off, and you pedal the bike like a traditional bicycle.
3.2 Mana me te Whakaatu
Familiarize yourself with the handlebar controls and the LCD display.
- Whakaaturanga LCD: Shows current battery level, speed, and riding mode. Monitor your battery to avoid range anxiety.
- Puta: Located on the handlebar, controls the speed in pure electric mode.
- Taumata Parai: Operate the front and rear disc brakes for effective stopping.
- Maama: Activate the high-bright headlight for improved visibility during low-light conditions.
- Pere: Use the integrated bell to alert pedestrians and other riders.
Figure 3: The ENGWE T14 provides a comfortable riding experience, even on urban streets, thanks to its shock absorption system.
Figure 4: Key features of the ENGWE T14, including the LCD display for monitoring, adjustable saddle for comfort, and integrated lighting for safety.
4. Tiaki
Regular maintenance ensures the longevity and optimal performance of your ENGWE T14 ebike.
- Tiaki Pūhiko:
- Me utu te pākahiko i nga wa katoa, ahakoa kaore i te whakamahia, kia mau tonu tona hauora.
- A ape i te tino whakamakuku i te pākahiko i mua i te whakakii.
- Whakaorangia te pākahiko ki te waahi makariri, maroke kia matara atu i te ra me te wera nui.
- Tire Tire:
- Regularly check the tire pressure of the 14" blast-proof vacuum rubber tires. Maintain recommended pressure for optimal performance and puncture resistance.
- Tirohia ngā potae mō te pakaru, te motu, te mea rānei kua mau ki roto.
- Pūnaha Perehi:
- Periodically check the brake pads for wear and replace them if necessary.
- Ensure brake levers provide firm and responsive braking. Adjust cable tension if needed.
- Clean disc rotors with a clean cloth and isopropyl alcohol to prevent squealing.
- Whakapai Whānui: Horoia te paihikara me te panuiamp kakahu. A ape i te whakamahi i nga rerenga wai pehanga nui ki runga i nga waahanga hiko.
- Takitaki Tiaki: Periodically inspect all bolts, nuts, and quick-release mechanisms to ensure they are securely tightened. Pay particular attention to folding mechanisms and the controller housing under the seat.
5. Te Raru
This section addresses common issues you might encounter with your ENGWE T14 ebike.
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Kāore te pahikara e whakakā | Battery not charged or improperly installed; loose electrical connection. | Ensure battery is fully charged and correctly seated. Check all visible electrical connections for looseness. |
| Kaore te motuka e awhina | Pedal assist level too low; brake levers engaged; motor cable disconnected. | Increase pedal assist level on display. Ensure brake levers are fully released. Check motor cable connection. |
| Perehi e tangi ana | Dirty brake rotors/pads; misaligned calipers. | Clean rotors and pads with isopropyl alcohol. Consult a bike mechanic for caliper alignment if needed. |
| Te awhe whakaheke | Under-inflated tires; frequent use of pure electric mode; aging battery. | Check and inflate tires to recommended pressure. Utilize pedal assist mode more often. Battery degradation is normal over time. |
If you encounter issues not listed here or require further assistance, please contact ENGWE customer support.
6. Whakatakotoranga
Detailed technical specifications for the ENGWE T14 Folding Electric Bike:
- Tauira: T14
- Motini: 350W Hub Motor (600W Peak)
- Pūhiko: Pūhiko Ritiumu Tango 48V 10Ah
- Tere Max: Tae atu ki te 19.2 mph (31 km/h)
- Awhe: 22 miles (Electric Mode), 37.2 miles (Assisted Mode)
- Rahi wira: 14 Inihi
- Tire: 14" Blast-proof Vacuum Rubber Tires
- Rauemi Tāpare: Waro maitai
- Whakatarewa: Front Fork, Center, Saddle, Rear Wheel (Quadruple Shock Absorber System)
- Kāhua Waea: Whakawhati i te kōpae takirua
- Kaupapa Poari Taurahi: 220.5 lbs (100 kg)
- Nga Waahanga Kei roto: Kickstand, Mudguard, Bell, Tool Kit
- Tiwhikete: UL 2849 Certified, GCC, GCC-CPSC-16CFR1512
- Ahu kua kopa: Tata ki te 43.3 x 21.6 x 9.8 inihi
Figure 5: The powerful 350W hub motor, providing efficient and reliable propulsion.
Figure 6: The bike's convenient folding mechanism allows for easy storage and transport.
Figure 7: Ergonomic design and dimensions, indicating suitability for riders between 4.5-5.5 ft and a load capacity of 220.5 lbs.
7. Pūtāhui me te Tautoko
Your ENGWE T14 Folding Electric Bike comes with a limited warranty to cover manufacturing defects.
- Wā Pūtāhui: The product is covered by a 1-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
- Whakakore: The warranty does not cover damage resulting from misuse, neglect, accidents, unauthorized modifications, or normal wear and tear.
- Tautoko Kiritaki: For warranty claims, technical assistance, or any questions regarding your ENGWE T14, please contact ENGWE customer service through the retailer where you purchased the product or visit the official ENGWE webpae mo nga korero whakapā.
