Pukapuka Tohutohu mō te Atekōkiri mō te Whakawhiti LED goobay 65586 700 mA/20 W

1. Kupu Whakataki

This manual provides essential information for the safe and efficient installation and operation of your goobay 65586 LED Transformer. This compact LED driver is designed to supply constant current (CC) to LED lamps, effectively preventing flickering and heat-related wear of connected LEDs. Unlike constant voltage (CV) transformers, constant current drivers enable consistent light quality and brightness and ensure uniform current across all LEDs, even in series connections.

Pānuihia tēnei pukapuka ā-ringa i mua i te tāutanga, ā, puritia hei tirotiro māu ā muri ake nei.

2. Nga Tohutohu Haumaru

WHAKATŪPATO: Electrical installation should only be performed by qualified personnel. Incorrect installation can lead to electric shock, fire, or damage to the product.

• Me whakarite kia momotu te pūnaha hiko i mua i te tāutanga, i te mahi tiaki rānei.
• Do not exceed the maximum rated power of 20 W.
• This transformer is designed for indoor use only (IP20). Do not expose to moisture or direct water.
• Ensure proper ventilation around the transformer to prevent overheating. The flat design ensures low heat generation, but adequate airflow is still important.
• The product is approved for installation in furniture.
• This LED transformer is kaore e taea te atarua.
• Maintain safe electronic isolation according to protection class II.

3. Hua Neke Atuview

The goobay 65586 LED Transformer is a compact constant current driver. It features screw terminals for quick and easy installation.

Whakaahua 3.1: Runga view of the goobay 65586 LED Transformer. This image shows the compact white casing with green end caps, displaying product labels and specifications.

Figure 3.2: The goobay 65586 LED Transformer with its protective green end caps removed, revealing the input and output screw terminals for electrical connections.

3.1 Nga waahanga matua:

• Putanga Auaha Pūmau: 700 mA for stable LED performance.
• Putanga Hiko: Morahi 20 W.
• Whakauru Voltage: 220-240 V AC.
• Putanga Voltage: 17-28.5 V DC.
• Hoahoa Kiato: Pro papatahifile for discreet installation, including in furniture.
• Tāutatanga ngawari: Integrated screw terminals.
• Haumaru: Protection Class II, SELV compliant.

4. Tatūnga me te Tāuta

Follow these steps for safe and correct installation of the LED transformer.

1. Momotu Mana: Before starting any electrical work, ensure the main power supply to the circuit is switched off at the breaker.
2. Whakaritea Waea: Strip approximately 5-7 mm of insulation from the ends of your input (AC) and output (DC) wires.
3. Connect Input (PRI):
   

   Whakaahua 4.1: Whakatata view of the orange input (PRI) screw terminals on the goobay 65586 LED Transformer, labeled 'N' and 'L' for neutral and live connections.

   • Locate the input terminals labeled "PRI" (Primary) or "220-240 V" on the transformer.
   • Connect the live (L) wire from your AC mains to the 'L' terminal and the neutral (N) wire to the 'N' terminal. Secure the wires firmly using the screw terminals.
4. Connect Output (SEC):
   

   Whakaahua 4.2: Whakatata view of the green output (SEC) screw terminals on the goobay 65586 LED Transformer, labeled '+' and '-' for positive and negative DC connections to the LEDs.
   • Locate the output terminals labeled "SEC" (Secondary) or "17-28.5 V" on the transformer.
   • Connect the positive (+) wire from your LED fixture(s) to the '+' terminal and the negative (-) wire to the '-' terminal. This transformer is designed for series connection of LEDs. Ensure the total voltage drop of your LED series falls within the 17-28.5 V range and the total power does not exceed 20 W.
   • Secure the wires firmly using the screw terminals.
5. Whakapiki: The transformer's compact and flat design allows for discreet mounting, such as behind cabinets or within furniture. Ensure the mounting location allows for adequate air circulation.
6. Whakaora i te Mana: Kia mau nga hononga katoa me te manatoko, whakahokia te hiko ki te ara iahiko.

Whakaahua 4.3: He example of the goobay LED transformer discreetly installed within a closet lighting setup, demonstrating its suitability for furniture integration.

5. Nga Tohutohu Whakahaere

Once correctly installed and powered, the goobay 65586 LED Transformer will automatically provide a constant current to the connected LED lights. No further user interaction is required for its basic operation.

• The transformer ensures a stable and flicker-free light output from your LEDs.
• This model is a constant current driver and is specifically designed for series connection of LEDs.
• As noted in the safety instructions, this transformer is kaore e taea te atarua.

6. Tiaki

The goobay 65586 LED Transformer requires minimal maintenance.

• Te horoi: Disconnect power before cleaning. Use a dry, soft cloth to wipe the exterior. Do not use liquid cleaners or solvents.
• Tirotiro: Periodically check the wiring connections to ensure they remain secure. Inspect the casing for any signs of damage or overheating.
• Whakatika: Do not attempt to open or repair the transformer yourself. Refer all servicing to qualified personnel.

7. Te Raru

If you encounter issues with your LED lighting system, refer to the following common troubleshooting steps:

8. Whakatakotoranga

Figure 8.1: Detailed dimensions of the goobay 65586 LED Transformer, showing its length (102.6 mm), width (35.5 mm), and height (16.1 mm), along with its weight (56g).

9. Pūtāhui me te Tautoko

For warranty information and technical support, please refer to the documentation provided with your purchase or contact goobay customer service. Keep your proof of purchase for warranty claims.

Manufacturer: Wentronic GmbH

Contact information can typically be found on the product packaging or the official goobay webpae.