ATTACK SHARK X3PRO 4K/8K Lightweight Wireless Gaming Mouse User Manual

1. Hua Neke Atuview

The ATTACK SHARK X3PRO is a high-performance lightweight wireless gaming mouse designed for precision and responsiveness. It features a Pixart PAW3395 optical sensor, Kailh GM8.0 switches, and offers tri-mode connectivity (wired, 2.4GHz wireless, and Bluetooth 5.2).

2. Ihirangi mokete

• ATTACK SHARK X3PRO Wireless Gaming Mouse
• USB-C ki te USB-He Waea Whakakona
• 2.4G USB Receiver (located on the bottom of the mouse)
• Type-C to USB-A Adapter
• Pukapuka Kaiwhakamahi

3. Tohutohu Tatūnga

3.1 Identifying Mouse Components

Familiarize yourself with the mouse components:

• Patene DPI: Located on the bottom, used to cycle through DPI settings.
• Patene Whakawhiti Aratau: Located on the bottom, allows switching between 2.4G, OFF, and BT modes.
• Aratau Tohu Maama: Provides visual feedback on the current connection mode and battery status.
• Kaiwhiwhi USB: Stored in a compartment on the bottom of the mouse. Open the cover to access it.
• Flexible Paracord Cable: Mo te hononga waea me te utu.
• Type-C to USB-A Adapter: For connecting the USB-C cable to a standard USB-A port.

3.2 Te hono i te Kiore

The X3PRO supports three connection modes:

3.2.1 Aratau Ahokore 2.4GHz

1. Locate the USB receiver on the bottom of the mouse by opening its cover.
2. Kōkuhuhia te kaiwhiwhi USB 2.4G ki tētahi tauranga USB e wātea ana i tō rorohiko.
3. Slide the mode switch on the bottom of the mouse to the '2.4G' position. The mode indicator light will illuminate.
4. Me hono aunoa te kiore ki to rorohiko.

3.2.2 Aratau Nihokikorangi 5.2

1. Slide the mode switch on the bottom of the mouse to the 'BT' position. The mode indicator light will flash, indicating pairing mode.
2. I tō rorohiko, whakatuwheratia ngā tautuhinga Nihokikorangi ka rapu i ngā pūrere hou.
3. Select 'ATTACK SHARK X3PRO' from the list of available devices to pair.
4. The mode indicator light will become solid once connected. The mouse supports connecting up to 4 devices simultaneously via Bluetooth.

3.2.3 Aratau Waea

1. Connect the USB-C end of the charging cable to the front port of the mouse.
2. Connect the USB-A end of the cable (or via the Type-C to USB-A adapter) to your computer's USB port.
3. Slide the mode switch on the bottom of the mouse to the 'OFF' position. The mouse will operate in wired mode and charge simultaneously.

3.3 Tāuta Atekōkiri (Kōwhiringa)

For full customization of the 5 programmable buttons, DPI settings, polling rate, LOD, and macros, download and install the official ATTACK SHARK X3PRO driver software from the manufacturer's website. The 8K wired and 4K wireless modes are plug-and-play for basic functionality.

4. Nga Tohutohu Whakahaere

4.1 Whakatikatika DPI

The mouse features 6 adjustable DPI levels. Press the DPI button on the bottom of the mouse to cycle through the preset DPI settings (800/1600/2400/3200/5000/26000). The mode indicator light may change color or flash to indicate the current DPI level, depending on the driver settings.

4.2 Te Auau Pōti

The X3PRO supports a wireless polling rate of up to 4000Hz and a wired polling rate of up to 8000Hz. A higher polling rate reduces input delay, providing a more responsive experience.

Polling Rate Requirement: For optimal 4K/8K polling rate performance, an Intel Core i5 or higher CPU / AMD Ryzen 5 or higher CPU and a USB 3.0 or higher port are recommended.

4.3 Whakahaere Pūhiko

The X3PRO mouse can provide up to 68 hours of continuous game time on a full charge. When the battery is low, the mode indicator light will typically flash red. Connect the mouse using the USB-C cable to charge it. The mouse can be used in wired mode while charging.

5. Tiaki

5.1 Te horoi

Hei pupuri i te mahi tino pai, horoia tō kiore i ia wā. Whakamahia he kakahu ngohengohe, maroke hei muru i te mata. Mō te paru uaua, he paku paku te horoi.amp Ka taea te whakamahi i te kakahu, kia kore ai te makuku e uru ki roto. Āta karohia ngā matū kino, ngā rauemi whakakoi rānei.

5.2 Waatea PTFE

The mouse is equipped with 100% virgin grade PTFE feet for a consistent glide. Keep the feet clean and free of debris to ensure smooth movement. If the feet become worn, replacement feet can be purchased from authorized retailers.

6. Te Raru

• Kaore te kiore e whakautu:
  Ensure the mouse is charged. Check the mode switch on the bottom of the mouse to confirm it is set to the correct connection mode (2.4G, BT, or OFF for wired). For 2.4G, ensure the USB receiver is securely plugged in. For Bluetooth, verify pairing in your computer's settings. For wired mode, ensure the USB-C cable is properly connected.
• 2.4GHz Wireless Dongle Missing:
  The 2.4G USB receiver is located in a compartment on the bottom of the mouse. Open the small cover to access it. If it is genuinely missing from the package, contact customer support.
• DPI or Polling Rate issues:
  Ensure the mouse driver software is installed for advanced settings. Verify your computer meets the minimum requirements for 4K/8K polling rates (Intel Core i5/AMD Ryzen 5 or higher CPU, USB 3.0 port).
• Kāore ngā pātene e mahi ana e ai ki te tumanako:
  If you have customized button functions, ensure the driver software is running and the settings are correctly applied. Reset the mouse to factory defaults via the software if necessary.
• Hononga mokowhiti:
  Move the mouse closer to the receiver/computer. Avoid sources of interference (e.g., other wireless devices, large metal objects). Ensure the mouse is fully charged.

7. Whakatakotoranga

8. Ataata Hua Whaimana

9. Pūtāhui me te Tautoko

For warranty information and technical support, please refer to the documentation included with your product or visit the official ATTACK SHARK webpae. Puritia to tohu hoko mo nga kereme whakamana.