Kupu Whakataki
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Globe Electric Clarissa 1-Light Wall Sconce. Please read all instructions carefully before beginning installation and retain this manual for future reference.
The Clarissa Wall Sconce features a matte brass finish with a white pleated fabric shade, designed to provide ambient lighting. It requires one E12/candelabra base 60W bulb (sold separately) and is compatible with LED and incandescent bulbs. The fixture is dimmable when used with a compatible dimmer switch (also sold separately).
Nga korero haumaru
WHAKATŪPATO: Te mate o te ru hiko. Momotuhia te hiko i te pouaka whakakorikori, i te waahi ara iahiko ranei i mua i te whakaurunga, te mahi ratonga ranei.
- Me whakarite kia tutuki ngā hononga hiko katoa i ngā ture me ngā whakaritenga ā-rohe, tae atu ki te National Electric Code (NEC).
- Mena kāore koe i te mōhio ki ngā waea hiko, whakapā atu ki tētahi tohunga hiko.
- Kaua e tāuta i tēnei taputapu ki ngā wāhi makuku, ki ngā wāhi ua rānei.amp ngā wāhi. Kua hangaia tēnei hua mō te whakamahinga o roto anake.
- Whakamahia te momo umanga me te wat anaketage (E12/Candelabra Base, max 60W). Exceeding the maximum wattagtērā pea ka wera rawa te taputapu, ā, ka pakaru pea hoki.
- Always allow the bulb to cool before replacing it.
- Do not operate the fixture with a damaged cord or if it has been dropped or damaged in any way.
- Puritia ngā rauemi mura kia matara atu i te rama.
Ihirangi mokete
Manatokona kei te noho nga waahanga katoa i mua i te tiimata o te whakaurunga:
- Wall Sconce Fixture (Matte Brass)
- White Pleated Fabric Shade
- Mounting Hardware (Crossbar, mounting screws, wire nuts)
- Pukapuka Tohutohu
Note: E12/Candelabra Base 60W bulb and dimmer switch are sold separately and are not included in this package.
Tatūnga me te Tāuta
Before you begin, ensure the power is turned off at the circuit breaker or fuse box.
Nga Utauta e Hiahia ana (Kaore i whakauruhia):
- Phillips Head Tiwiri
- Nga Kaipupuri Waea
- Ripene Hiko
- Mohiti Haumaru
Hipanga Tāuta:
- Whakaweto Hiko: Locate the circuit breaker or fuse box and turn off the power to the wall switch outlet box where you will install the fixture.
- Whakapaia te Mata Maunga: Ki te whakakapi i tētahi taputapu o nāianei, tangohia marietia. Me whakarite kei te mau te pouaka hiko, ā, ka taea te tautoko i te taumaha o te taputapu.
- Attach Mounting Crossbar: Secure the mounting crossbar to the electrical outlet box using the provided mounting screws. Ensure the crossbar is level.
- Hanga Hononga Hiko:
- Honoa te pango waea mai i te taputapu ki te pango (Live) wire from the outlet box using a wire nut.
- Honoa te ma waea mai i te taputapu ki te ma (Neutral) wire from the outlet box using a wire nut.
- Honoa te whenua waea mai i te taputapu ki te whenua wire from the outlet box (or to the green ground screw on the crossbar) using a wire nut.
Ensure all wire nuts are securely tightened and wrap connections with electrical tape for added safety.
- Whakapuruhia te Pikitia: Carefully tuck the wires into the outlet box. Align the fixture base with the mounting screws on the crossbar and secure the fixture in place with the decorative nuts or screws provided.
- Tāuta Pūrama: Screw one E12/candelabra base 60W max bulb (sold separately) into the socket. Do not overtighten.
- Āpiti Taumarumaru: Carefully place the white pleated fabric shade onto the fixture according to the design.
- Whakaora i te Mana: Turn the power back on at the circuit breaker or fuse box. Test the fixture.
Image: Dimensions of the Clarissa Wall Sconce. The fixture measures approximately 14.84 inches (37.7 cm) in height, 9.48 inches (24.1 cm) in width, and extends 5.68 inches (14.4 cm) from the wall.
Whakaahua: Taipitopito view of the sconce, showing the matte brass arm and base, and the textured white pleated fabric shade.
Nga Tohutohu Whakahaere
Once installed and power is restored, operate the wall sconce using the wall switch connected to the fixture.
- Whakakā/Weto: Use the standard wall switch to turn the light fixture on or off.
- Taumahinga Moama: This fixture is fully dimmable. To utilize the dimming feature, you must install a compatible dimmer switch (sold separately) in place of a standard wall switch. Adjust the dimmer switch to achieve your desired light intensity.
- Tīpakonga Pūrama: You can choose between lower wattage bulbs for a softer, more intimate glow or higher wattage bulbs (up to 60W) for brighter illumination, depending on your preference.
Image: The Clarissa Wall Sconce illuminating a living room, demonstrating its aesthetic and functional contribution to the space.
Te tiaki
Mā te tiaki auau ka roa te ora me te mahi tino pai o tō rama pakitara.
- Te horoi: Disconnect power before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish. The fabric shade can be gently dusted or spot cleaned with a damp kakahu mehemea e tika ana.
- Whakakapi Purama: Ensure the power is off and the bulb has cooled completely before attempting to replace it. Unscrew the old bulb and screw in a new E12/candelabra base 60W max bulb.
- Tirotiro: Tirohia ngā hononga hiko katoa me ngā taputapu whakamau i ia wā, i ia wā, mō te piripono.
Raparongoā
If your wall sconce is not functioning correctly, refer to the following common issues and solutions:
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Kaore e marama te rama. |
|
|
| Ka whiti marama. |
|
|
| Fixture is loose on the wall. |
|
|
If the problem persists after trying these solutions, contact a qualified electrician or Globe Electric customer support.
Whakatakotoranga
- Tauira: Clarissa (65000083)
- Waitohu: Globe Hiko
- Momo: 1-Whakaahua Taiepa Maama
- Mutu: Parahi Maama
- Rauemi whakamarumaru: White Pleated Fabric
- Ahu: 10.37" L x 9.5" W x 14.88" H (approx. 26.3 cm L x 24.1 cm W x 37.8 cm H)
- Turanga Pupura: E12 / Candelabra
- Max Wattage: 60W (ia pūrama)
- Momo Puma: He rama, he rama ranei (kaore te rama)
- Voltage: 120V
- Ka taea te atarua: Yes, with compatible dimmer switch (sold separately)
- Momo Tāuta: Wall Mount, Corded Electric
- Whakamahinga o roto/waho: Roto anake
- Taumaha Tūemi: 1.03 Pauna (tata ki te 0.47 kg)
Nga korero Whakaputanga
According to product specifications, this Globe Electric Clarissa Wall Sconce (Model 65000083) is sold without a manufacturer's warranty. Please refer to the retailer's return policy for any issues upon purchase.
Tautoko
For further assistance or inquiries regarding your Globe Electric product, please visit the official Globe Electric webpaetukutuku, whakapā atu ranei ki ta raatau tari ratonga kaihoko.
Globe Electric Official Webpae: www.globe-electric.com
You may also refer to the Globe Electric store on Amazon for additional product information: Globe Electric Amazon Store
