Rigol DG902 Pro

RIGOL DG902 Pro Waveform Generator User Manual

Model: DG902 Pro

Waitohu: Rigol

1. Hua Neke Atuview

The RIGOL DG902 Pro is a high-performance waveform generator designed for a wide range of applications requiring precise signal generation. It features a 16-bit vertical resolution, a maximum sample rate of 1.25 GSa/s, and a 70 MHz output frequency. This device is capable of generating various waveforms and offers advanced modulation capabilities.

Ko nga ahuatanga matua ko:

Mua view of the RIGOL DG902 Pro Waveform Generator

Whakaahua 1.1: Mua view of the RIGOL DG902 Pro Waveform Generator, showing the display, control panel, and output channels.

2. Tatūnga me nga Hononga

2.1 Te Wetewete me te Tirotiro

Carefully unpack the DG902 Pro waveform generator and all accessories from the shipping carton. Inspect the instrument for any signs of damage that may have occurred during transit. If any damage is found, contact your supplier immediately.

2.2 Hononga Hiko

Connect the provided power adapter to the DC input port on the rear panel of the instrument. Plug the power adapter into a suitable AC power outlet. The DG902 Pro can also be operated via a USB-C power bank for portable use.

RIGOL DG902 Pro connected to a USB-C power bank

Figure 2.1: The DG902 Pro connected to an external USB-C power bank, demonstrating its portable power capability.

2.3 Ngā Hononga Tāuru/Taputanga

The rear panel of the DG902 Pro provides various input and output ports for signal generation and external synchronization.

Whakamuri view of the RIGOL DG902 Pro Waveform Generator showing connection ports

Whakaahua 2.2: Whakamuri view of the DG902 Pro, highlighting the 10MHz REF IN/OUT, AUX IN/OUT, LAN, USB DEVICE, and USB-C ports.

  • Channel Outputs (CH1, CH2): Located on the front panel, these BNC connectors provide the main waveform outputs.
  • 10MHz REF IN/OUT: Used for external reference clock synchronization.
  • AUX IN/OUT: Auxiliary input/output ports for additional signal routing.
  • Tauranga LAN: For network connectivity and remote control.
  • USB DEVICE Port: For connecting to a computer for data transfer and control.

3. Nga Tohutohu Whakahaere

3.1 Atanga Kaiwhakamahi me te Whakaaturanga

The DG902 Pro features a 7.0-inch color display with a resolution of 1024x600 pixels, providing a clear and intuitive interface for operation. Navigation is primarily done through the rotary knob, directional buttons, and dedicated function keys.

Close-up of the RIGOL DG902 Pro's 7.0-inch display

Whakaahua 3.1: He tata view of the DG902 Pro's 7.0-inch display, highlighting its size and resolution.

RIGOL DG902 Pro screen showing channel 1 and channel 2 settings

Figure 3.2: The DG902 Pro display showing detailed settings for Channel 1 and Channel 2, including frequency, ampreo, me te whakatiki.

3.2 Te Whakaputa Ngaru Taketake

  1. Whakahiko: Press the power button located on the front panel to turn on the instrument.
  2. Tīpako Hongere: Use the CH1 or CH2 buttons to select the desired output channel.
  3. Select Waveform Type: Pehia te Hangangaru button (e.g., Sine, Square, Pulse, Ramp, Arb, Noise) to choose the desired waveform.
  4. Tautuhi Tawhā: Use the rotary knob and numeric keypad to adjust parameters such as frequency, amplitude, and offset. The display will show the current settings.
  5. Whakahohehia te Putanga: Pehia te Ka/Weto button for the selected channel to enable the waveform output.

3.3 Advanced Modulation Functions

The DG902 Pro supports various modulation types to meet complex signal generation requirements. These include Amplitude Modulation (AM), Frequency Modulation (FM), Phase Modulation (PM), Amplitude Shift Keying (ASK), Frequency Shift Keying (FSK), Pulse Width Modulation (PWM), and Sum modulation.

RIGOL DG902 Pro with various modulation types illustrated around it

Figure 3.3: An illustration showing the DG902 Pro's support for various modulation types, including AM, FM, PM, ASK, FSK, PWM, and SUM.

To access modulation settings, press the Mod button and navigate through the options using the display and control knob.

4. Tiaki

4.1 Te horoi i te taputapu

To maintain the performance and appearance of your DG902 Pro, regularly clean its exterior. Use a soft, damp cloth with a mild detergent to wipe down the casing. Avoid using abrasive cleaners or solvents that could damage the plastic components or screen.

  • Momotuhia te hiko i mua i te horoi.
  • Do not allow any liquids to enter the instrument.
  • Clean the display screen gently with a soft, lint-free cloth.

4.2 Rokiroki

When not in use for extended periods, store the DG902 Pro in a dry, dust-free environment, away from direct sunlight and extreme temperatures. It is recommended to store the instrument in its original packaging or a protective case to prevent damage.

5. Te Raru

This section provides solutions to common issues you might encounter with your DG902 Pro Waveform Generator. If the problem persists after trying these steps, please contact Rigol customer support.

RaruraruTake peaRongoā
Kaore te taputapu e kaha ana.Power cable not connected properly; power outlet issue; power adapter fault.Check power cable connection. Try a different power outlet. Ensure power adapter is functioning correctly.
No waveform output.Kāore i whakahohea te hongere putanga; amplitude set to zero; incorrect cable connection.Pehia te Ka/Weto button for the channel. Increase amplitude. Verify BNC cable connections.
Ko te whakaaturanga he patea, he tio ranei.Software error; temporary glitch.Restart the instrument by powering it off and on again. If the issue persists, contact support.

6. Whakatakotoranga

The following table outlines the key technical specifications of the RIGOL DG902 Pro Waveform Generator.

TawhāUara
Tau tauiraDG902 Pro
Max. Sample Reiti1.25 GSa/s
Auautanga PutangaTae atu ki te 70 MHz
Nga hongere2
Whakatau Poutū16 Bit
Arb Length16 Mpts/CH (32 Mpts/CH optional)
Waka WhakatikaAs low as 3 ns
Waveform JitterAs low as 200 ps
Counter Bandwidth1 GHz
Hunga Hua10.47 x 6.5 x 3.15 inihi
Taumaha3.92 Pauna
KaihangaRIGOL

7. Pūtāhui me te Tautoko

7.1 Nga Korero Whakaputanga

RIGOL provides a standard warranty for its products, covering defects in materials and workmanship under normal use. For specific warranty terms and duration, please refer to the warranty card included with your product or visit the official RIGOL webpae. Puritia to riirii hoko hei tohu mo te hoko mo nga kereme whakamana.

7.2 Tautoko Kiritaki

For technical assistance, troubleshooting, or service requests, please contact RIGOL customer support. You can find contact information, including phone numbers and email addresses, on the official RIGOL webpae (www.rigol.com). When contacting support, please have your product model number (DG902 Pro) and serial number ready.

Tuhinga e pa ana - DG902 Pro

Preview RIGOL DG800 Pro/DG900 Pro Series Aratohu Papatono
Ka whakaratohia e tenei aratohu hotaka nga korero mo te whakamahi i nga whakahau SCPI ki te whakahaere i te RIGOL DG800 Pro me te DG900 Pro mahi raupapa / kaihanga ngaru-a-waa ma nga atanga mamao penei i te USB me te LAN.
Preview RIGOL DG5000 Pro Series Taumahi/Waveform Generator Aratohu Tere
He aratohu poto mō te RIGOL DG5000 Pro Series Function/Arbitrary Waveform Generator, e pā ana ki te haumaru, te tatūnga, te whakahaere, te tautuhinga tawhā, te rapurongoā, me te mana mamao.
Preview RIGOL DG800 Pro Series Taumahi/Waveform Generator Aratohu Tere
He aratohu tere ki te RIGOL DG800 Pro Series Function/Arbitrary Waveform Generator, e kapi ana i ngā whakaritenga haumaru, ngā hua puta noa i teview, te whakarite, te whakahaere, te mana mamao, me te rapurongoā.
Preview RIGOL DG5000 Pro Series Taumahi/Waveform Generator Aratohu Kaiwhakamahi
Aratohu kaiwhakamahi matawhānui mo te RIGOL DG5000 Pro Series Function/Waveform Generator. Ko tenei pukapuka e whakaatu ana i nga ahuatanga o te hua, nga tohutohu haumaru, nga mahi tere tere, me nga mahi matatau penei i te whakarereke, te tahia, te pakaru, me te hanga tauira. Kei te hipoki i nga tauira penei i te DG5508 Pro, DG5252 Pro, me etahi atu, e whakarato ana i nga korero whakahirahira mo te whakamahi me te tatūnga whai hua.
Preview RIGOL DG5000 Pro Series Taumahi/Waveform Generator Aratohu Tere
Ko tenei aratohu tere e whakarato ana i nga korero tino nui mo te RIGOL DG5000 Pro Series Function/Arbitrary Waveform Generator, e hipoki ana i nga whakaritenga haumaru, hua ki runga.view, te whakarite mo te whakamahinga, te mahi, me te rapu raruraru.
Preview DG5000 Pro Rangatū Taumahi/Waveform Generator Mahinga Manatokonga
Ko tenei tuhinga e whakarato ana i nga tikanga taipitopito mo te manatoko mahi o te RIGOL DG5000 Pro Series Function/Arbitrary Waveform Generator, e hipoki ana i te tika o te auau, ampte tika o te litude, te tika o te whakaheke i te DC, te papatahi o te AC, te whakakorikori o te hau, nga tohu horihori, me nga whakamatautau taikaha.