1. Kupu Whakataki
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Adcraft SGM-1 Granita Frozen Beverage Machine. Please read all instructions carefully before initial use to ensure proper function and longevity of the unit.
The Adcraft SGM-1 is a single-hopper, 3-gallon capacity machine designed for preparing and dispensing a variety of frozen and cold beverages, including granitas, slushies, and frozen cocktails. It features a durable stainless steel and high-impact plastic frame, a clear polycarbonate hopper, LED lighting, a non-drip tap, and a digital thermostat for precise temperature control.
2. Nga Tohutohu Haumaru
Me whai i nga wa katoa i nga whakaritenga haumaru ina whakamahi taputapu hiko hei whakaiti i te tupono o te ahi, te ru hiko, te whara ranei.
- Pānuihia nga tohutohu katoa i mua i te whakahaere i te miihini.
- Ensure the electrical supply matches the requirements specified on the machine's rating label (115V/60Hz).
- Connect the machine only to a properly grounded NEMA 5-15 outlet. Do not use extension cords or adapters.
- Kaua e rukuhia te miihini, te taura, te mono ranei ki te wai, ki etahi atu wai ranei.
- Unplug the machine from the outlet before cleaning, servicing, or when not in use.
- Keep hands and utensils out of the hopper during operation to prevent injury.
- Do not operate the machine with a damaged cord or plug, or after the machine malfunctions or has been damaged in any manner.
- Place the machine on a stable, level surface with adequate ventilation around the unit. The non-slip feet provide stability.
- Ko tenei taputapu ehara i te mea mo te whakamahi ma nga tangata (tae atu ki nga tamariki) he iti te kaha o te tinana, te tairongo, te hinengaro ranei, te kore mohio me te mohiotanga, mena ka tukuna atu ki a raatau te tirotiro, te tohutohu ranei mo te whakamahi i te taputapu e te tangata e whai mana ana mo to raatau haumaru. .
3. Wewetewete me te Tatūnga
3.1 Te Wetewete
- Kia ata tangohia te miihini mai i tana putunga.
- Inspect the unit for any shipping damage. If damage is found, contact your supplier immediately.
- Tango i nga rawa whakakakahu katoa, tae atu ki nga kiriata whakamarumaru, riipene ranei.
3.2 Whakanoho
- Place the machine on a sturdy, level countertop or table.
- Ensure there is sufficient space around the unit (at least 6 inches) for proper air circulation, especially around the ventilation grilles.
- Avoid placing the machine near heat sources or in direct sunlight.
3.3 Te horoi tuatahi
I mua i te whakamahinga tuatahi, horoia nga waahanga katoa ka pa ki nga inu.
- Remove the hopper lid, hopper, agitator, and tap assembly.
- Wash these components with warm, soapy water. Rinse thoroughly and dry completely.
- Horoia te taha o waho o te miihini me te panuiamp kakahu.
- Reassemble all parts, ensuring they are correctly seated.
3.4 Hononga Hiko
Plug the 6-foot power cord into a dedicated 115V/60Hz NEMA 5-15 grounded electrical outlet.
4. Mahi
4.1 Te Whakakī i te Hopper
- Ensure the machine is clean and properly assembled.
- Prepare your desired beverage mixture according to recipe instructions. Do not exceed the 3-gallon capacity of the hopper.
- Pour the mixture into the clear polycarbonate hopper.
- Securely place the hopper lid back on the unit.
4.2 Powering On and Settings
The machine features separate on/off switches for power and the agitator(s), along with a digital control panel.
Image: Control panel of the Adcraft SGM-1 Granita Frozen Beverage Machine, showing the power button, digital display, and various function buttons for settings.
- Pēhia te whakakā hiko matua hei whakakā i te mihini.
- Press the agitator switch to activate the continuous agitator system, which keeps the product mixed and fresh.
- Use the digital thermostat controls to select your desired setting:
- Cold Drink Setting: For dispensing chilled, non-frozen beverages.
- Slushy Setting: For freezing beverages to a slush consistency.
- The LED lighting built into the top panel will illuminate the product inside the hopper, enhancing visibility.
4.3 Nighttime Running Feature
To conserve energy during off-peak hours, utilize the nighttime running feature. Consult the digital control panel instructions for specific programming steps to activate this mode.
4.4 Te tuku
To dispense a beverage, pull the non-drip tap mechanism forward. Release the tap to stop the flow. The non-drip design helps prevent leakage.
Image: The Adcraft SGM-1 Granita Frozen Beverage Machine, showcasing its single 3-gallon clear hopper, black base, and front-mounted dispensing tap.
5. Te horoi me te tiaki
Regular cleaning and maintenance are crucial for hygiene, optimal performance, and extending the lifespan of your machine.
5.1 Whakapai ia ra
- Tangohia te miihini mai i te putanga hiko.
- Empty any remaining beverage from the hopper.
- Remove the hopper lid, hopper, agitator, and tap assembly.
- Wash all removable parts with warm, soapy water using a soft brush or sponge. Rinse thoroughly with clean water.
- Clean the stainless steel cooling cylinder inside the machine with a damp kakahu.
- Horoia te taha o waho o te miihini me te panuiamp kakahu. Kaua e whakamahi i nga taputapu horoi, i nga papa horoi ranei.
- The removable drip tray with float indicator should be emptied and cleaned daily.
- Tukua kia maroke nga wahanga katoa i mua i te whakahiato.
5.2 Tiaki i nga wa katoa
- Tirohia te taura hiko mo nga tohu o te kino.
- Ensure ventilation grilles are free from dust and debris to maintain proper airflow.
- Inspect seals and gaskets for wear and tear. Replace if necessary to prevent leaks.
6. Te Raru
I mua i te whakapā atu ki te ratonga, review nga take me nga otinga noa e whai ake nei:
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Karekau te miihini e kaha ana. | No power supply; power switch off; faulty cord/plug. | Check power outlet; ensure power switch is on; inspect cord/plug for damage. |
| Beverage not freezing or too thin. | Incorrect temperature setting; insufficient product in hopper; poor ventilation. | Adjust digital thermostat to slushy setting; ensure hopper is adequately filled; check for clear ventilation around unit. |
| Beverage too thick or frozen solid. | He iti rawa te tautuhinga pāmahana. | Increase temperature setting slightly. |
| Leakage from tap or hopper. | Tap assembly not properly seated; worn seals/gaskets. | Ensure tap is fully closed and correctly assembled; inspect and replace worn seals. |
| Agitator not rotating. | Agitator switch off; obstruction; motor issue. | Ensure agitator switch is on; check for obstructions in hopper; contact service if issue persists. |
If the problem persists after attempting these solutions, please contact Adcraft customer support.
7. Whakatakotoranga
| Ingoa Tauira | SGM-1 |
| Waitohu | Adcraft |
| Te kaha | 3 Gallons (Single Hopper) |
| Puna Mana | Hiko Hiko |
| Hononga hiko | 115V/60Hz, NEMA 5-15 Plug |
| Aratau Mahi | Aunoa |
| Hunga Hua | 20.5 x 10.5 x 32 inihi (L x W x H) |
| Taumaha Tūemi | 84 pauna |
| Rauemi | Stainless Steel, High-Impact Plastic, Polycarbonate (Hopper) |
| Tae | Pango |
| Kaihanga | Nga Kamupene Tuku iho |
| UPC | 646563998844 |
8. Pūtāhui me te Tautoko
8.1 Nga Korero Whakaputanga
This Adcraft SGM-1 Granita Frozen Beverage Machine is covered by the Adcraft One-Year Limited Warranty. This warranty covers defects in material and workmanship under normal use and service for a period of one year from the date of purchase. Please retain your proof of purchase for warranty claims.
For full details regarding warranty terms, conditions, and exclusions, please refer to the official warranty documentation provided with your product or contact Adcraft customer service.
8.2 Tautoko Kiritaki
For technical assistance, parts, or warranty inquiries, please contact Adcraft customer support. Contact information can typically be found on the manufacturer's webte waahi kei runga ranei i te kohinga hua.
