1. Kupu Whakataki
This manual provides detailed instructions for the safe and efficient use of your Blitzwolf BW-CML5 Monitor Light Bar. Please read this manual thoroughly before operating the device and retain it for future reference.
2. Ihirangi mokete
Please check the package contents upon opening to ensure all items are present and undamaged. If any items are missing or damaged, please contact customer support.
- Blitzwolf BW-CML5 Monitor Light Bar
- Mana Mamao Ahokore
- USB Itini taura
- Pukapuka Kaiwhakamahi (tenei tuhinga)
3. Nga Tohutohu Haumaru
Hei whakarite i te mahi haumaru me te aukati i te kino, me whai i nga whakatupato haumaru e whai ake nei:
- Kaua e tukuna te taputapu ki te wai, ki te makuku nui ranei.
- A ape i te whakanoho i te taputapu ki te taha o nga puna wera, ki te ra tika ranei.
- Kaua e ngana ki te wetewete, ki te whakatika ranei i te taputapu. Tukuna atu nga ratonga katoa ki nga kaimahi whai tohu.
- Use only the provided USB power cable or a certified equivalent.
- Kaua e taea e nga tamariki.
- Ensure the light bar is securely attached to the monitor to prevent accidental falls.
4. Tatūnga me te Tāuta
Follow these steps to set up your monitor light bar:
- Whakapirihia te Pae Maama: Gently place the light bar on top of your monitor. The adjustable clip mechanism should securely grip the top edge of the monitor. Ensure the light source faces downwards towards your desk.
- Hono Hono: Connect the USB power cable to the light bar's power input port. Plug the other end of the USB cable into a USB port on your computer or a compatible USB power adapter (5V/1A recommended).
- Whakaturia te Mana Mamao: Place the wireless remote control on your desk within easy reach. The remote operates wirelessly and does not require direct line of sight to the light bar.
Whakaahua 1: The Blitzwolf BW-CML5 Monitor Light Bar attached to a monitor, with its wireless remote control placed on a desk. This image illustrates the typical setup of the product.
5. Nga Tohutohu Whakahaere
The Blitzwolf BW-CML5 is controlled via its wireless remote. Familiarize yourself with the remote's functions:
Whakaahua 2: He tata view of the wireless remote control for the Blitzwolf BW-CML5 Monitor Light Bar, showing the central rotary knob and three "DIY" preset buttons.
- Hiko Whakaka/Weto: Press the central rotary knob once to turn the light bar on or off.
- Whakaritea te Tirohanga: Rotate the central knob clockwise to increase brightness and counter-clockwise to decrease brightness.
- Whakaritea te Pawera Tae: Press and hold the central knob for approximately 2 seconds. While holding, rotate the knob to cycle through different color temperature settings (e.g., warm white, neutral white, cool white). Release the knob to set the desired temperature.
- DIY Preset Buttons (DIY1, DIY2, DIY3): These buttons allow you to save and recall your preferred brightness and color temperature settings.
- Hei Tiaki Tatūkē: Adjust the light bar to your desired brightness and color temperature. Then, press and hold one of the DIY buttons (DIY1, DIY2, or DIY3) for approximately 3 seconds until the light blinks, indicating the setting has been saved.
- Hei maumahara i te tatūkē: Simply press the corresponding DIY button (DIY1, DIY2, or DIY3) once to activate the saved setting.
6. Tiaki
Ma te tiaki tika ka mau te roa o to taputapu:
- Te horoi: Disconnect the power before cleaning. Use a soft, dry cloth to wipe the light bar and remote control. Do not use abrasive cleaners or solvents.
- Rokiroki: Ki te kore e whakamahia mo te wa roa, penapenahia te taputapu ki te waahi makariri, maroke, kia matara atu i te ra me te wera nui.
7. Te Raru
If you encounter issues with your Blitzwolf BW-CML5, please refer to the following common problems and solutions:
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Kare te pae rama e ka ana. | No power, loose connection, remote battery low. | Check USB power cable connection. Ensure USB power source is active. Replace remote control batteries if applicable (check remote manual for battery type). |
| Ko te mana mamao kaore e aro. | Remote battery low, interference, not paired. | Replace remote control batteries. Move remote closer to the light bar. If issues persist, refer to the remote's specific pairing instructions (if any, usually automatic for these devices). |
| Ka whiti te marama, ka pohehe ohorere ranei. | Insufficient power supply, faulty cable. | Ensure the USB power source provides sufficient power (5V/1A recommended). Try a different USB port or power adapter. Replace the USB cable if necessary. |
If the problem persists after trying these solutions, please contact Blitzwolf customer support for further assistance.
8. Whakatakotoranga
| Tauira | BW-CML5 |
| Waitohu | BlitzWolf |
| Rahi Hua (L x W x H) | 10 x 5 x 1.27 cm |
| Taumaha Hua | 100 g |
| Whakauru Voltage | 5V (mā te USB) |
| Tae | Pango |
9. Pūtāhui me te Tautoko
Blitzwolf products are designed and manufactured to the highest quality standards. For information regarding warranty coverage, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official Blitzwolf website. Please have your model number (BW-CML5) and purchase information ready when contacting support.
For further assistance, you may contact Blitzwolf customer service through their official channels.
