Kupu Whakataki
This manual provides instructions for the safe installation, operation, and maintenance of your Maxxima 2-inch Ultra-Thin Recessed Anti-Glare LED Downlight, Model MRL-S20803SBW. This fixture is designed for residential and commercial indoor applications, offering adjustable color temperature and dimming capabilities. Please read these instructions thoroughly before installation and retain them for future reference.
Nga korero haumaru
WARNING: RISK OF ELECTRIC SHOCK. DISCONNECT POWER AT THE CIRCUIT BREAKER BEFORE INSTALLATION OR SERVICING.
- All electrical connections must be in accordance with local and National Electrical Code (NEC) standards. Consult a qualified electrician if you are unfamiliar with proper electrical wiring connections.
- This fixture is intended for installation in ceilings only.
- Kaua e whakarerekētia te taputapu, kaua hoki e whakamahia mō ētahi atu take ehara i te mea i whakaritea.
- Me whakarite te tuku voltage he 120VAC.
- This product is IC Rated, suitable for direct contact with insulation.
- Ko tenei taonga ko Damp Rated, suitable for use in bathrooms and kitchens where moisture may be present.
Ihirangi mokete
Manatokona kei te noho nga waahanga katoa i mua i te tiimata o te whakaurunga:
- 1 x Maxxima 2-inch Square LED Downlight Fixture (White Trim, Black Baffle)
- 1 x Remote Junction Box with Integrated CCT Selectable Switch
- 1 x Foam Gasket (pre-attached or included)
This image displays the complete Maxxima 2-inch square LED downlight unit, including the main fixture with its white trim and deep-set black baffle, and the connected external junction box.
Tatūnga me te Tāuta
A pee i enei taahiraa mo te whakauru tika:
Utauta e hiahiatia ana:
- Nga Kaipupuri Waea
- Pouaka (Phillips me Flathead)
- Hole Saw or Template (2.5-inch diameter)
- Riipene Ine
Hipanga Tāuta:
- Whakaweto Hiko: Locate the circuit breaker controlling the area where the downlight will be installed and turn off the power. Verify power is off using a voltage Kaiwhakamatautau.
- Whakaritea te whakatuwheratanga o te tuanui: Using a 2.5-inch hole saw or template, cut a circular opening in the ceiling at the desired location. Ensure there are no obstructions (e.g., joists, pipes) behind the cutting area.
- Pouaka Hononga Uru: Open the cover of the remote junction box.
- Hononga Waea: Connect the household electrical wires to the junction box wires. Use appropriate wire connectors (not included) to secure the connections:
- Connect the black (Live) wire from the supply to the black wire of the junction box.
- Connect the white (Neutral) wire from the supply to the white wire of the junction box.
- Connect the green or bare copper (Ground) wire from the supply to the green wire of the junction box.
This image displays the interior of the junction box with its cover open, revealing the wiring terminals for electrical connections (black, white, green) and the prominent 5 CCT selector switch.
- Tīpako Pawera Tae (CCT): Before closing the junction box, use the switch located on the side of the junction box to select your desired color temperature (2700K, 3000K, 3500K, 4000K, or 5000K).
He whakanuia view of the 5 CCT switch on the side of the junction box, clearly showing the selectable color temperature options: 2700K, 3000K, 3500K, 4000K, and 5000K.
This image illustrates the key feature of 5 CCT (Correlated Color Temperature) selection. It shows the downlight fixture alongside a magnified view of the switch located on the junction box, indicating options for 2700K (Soft White), 3000K (Warm White), 3500K (Bright White), 4000K (Neutral White), and 5000K (Daylight).
- Pouaka Hononga Haumaru: Close the junction box cover and secure it. Place the junction box into the ceiling cavity, ensuring it is not pinched or stressed.
- Tūhonohia te Pouaka Whakakotahitanga: Connect the male connector from the downlight fixture to the female connector on the junction box's installation cord. Ensure a secure connection.
- Insert Downlight Fixture: Gently push the spring-loaded clips on the sides of the downlight fixture upwards and insert the fixture into the ceiling opening. Release the clips to secure the fixture flush against the ceiling. The foam gasket will help create a tight seal.
Te tuara view of the Maxxima 2-inch square LED downlight, revealing the heat sink fins for thermal management and the spring-loaded clips used for securing the fixture in the ceiling.
- Whakaora i te Mana: Kia oti te whakaurunga o te taputapu, whakahokia te hiko ki te waahi ara iahiko.
A lifestyle image demonstrating several Maxxima 2-inch square LED downlights seamlessly integrated into the ceiling of a contemporary kitchen and living space, providing ambient lighting.
Nga Tohutohu Whakahaere
Your Maxxima LED Downlight is designed for simple operation:
- Hiko Whakaka/Weto: The downlight is controlled by a standard wall switch connected to the electrical circuit.
- Te auri: This fixture is compatible with most standard LED dimmers, allowing for a dimmable range of 20% to 100%. Ensure your dimmer is compatible with LED lighting for optimal performance.
- Te Tohu Paemahana Tae: The color temperature (CCT) is set using the switch on the junction box during installation. It cannot be changed without accessing the junction box.
A detailed close-up of the Maxxima 2-inch square LED downlight after installation, showing the white trim flush with the ceiling and the black baffle housing the illuminated LED.
Te tiaki
The Maxxima LED Downlight requires minimal maintenance:
- Te horoi: To clean the fixture, ensure power is off. Wipe the surface with a soft, dry, or slightly damp kakahu. Kaua e whakamahia ngā kaihoroi whakakoi, ngā whakarewa, ngā matū kino rānei, nā te mea ka kino pea te whakaotinga, ngā wāhanga hiko rānei.
- Karekau he waahanga e taea ana e te Kaiwhakamahi: The LED light source is integrated and not replaceable. Do not attempt to open or repair the fixture.
Raparongoā
Mena ka pa ki a koe nga raru o to rama, tirohia nga raru me nga otinga e whai ake nei:
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Kaore e marama te rama. | Kaore he mana ki te huringa. Hononga waea matara. Incorrect CCT switch setting. | Tirohia te kaiwhati ara iahiko me te pana pakitara. Manatokohia nga hononga waea katoa kei roto i te pouaka whakaurunga kei te mau (me mohio kua mate te hiko i te tuatahi). Confirm CCT switch on junction box is set to a valid position. |
| Ka kemo, ka memeha rānei te mārama i ngā wā katoa. | Whakawhiti dimmer hotokore. Hononga waea matara. | Ensure you are using an LED-compatible dimmer switch. Check all wiring connections (with power off). |
| Te pāmahana tae hē. | I hē te whakatakotoranga o te whakakā CCT. | Access the junction box (power off) and adjust the CCT selection switch to the desired setting. |
Whakatakotoranga
| Āhuahira | Whakatakotoranga |
|---|---|
| Waitohu | Maxxima |
| Tau tauira | MRL-S20803SBW |
| Whakamahi Hiko | 9 Watts |
| Tirohanga | 500 Lumens |
| Whakauru Voltage | 120VAC |
| Paemahana Tae (CCT) | 2700K / 3000K / 3500K / 4000K / 5000K Selectable |
| Taupū Whakaatu Tae (CRI) | 90 |
| Awhe Atarua | 20% - 100% (with compatible LED dimmer) |
| Fixture Dimensions (L x W x H) | 3.16" x 3.16" x 2.6" |
| Junction Box Dimensions (H x W x D) | 1.25" x 3.4" x 3.4" |
| Recommended Hole Cutout | 2.5 inihi |
| Rauemi | Konumohe |
| Whakaoti | White Trim, Black Baffle |
| Tiwhikete | ETL Listed, IC Rated |
| Whakatauranga Taiao | Damp Rated (Indoor Use) |
| Te horahanga kurupae | 36° |
| Taumaha Tūemi | 10.72 hekere |
A technical diagram illustrating the physical dimensions of the Maxxima 2-inch square LED downlight, with measurements of 3.16 inches in length, 3.16 inches in width, and 2.6 inches in height.
Pūtāhui me te Tautoko
This Maxxima LED Downlight is backed by a 3-tau pūtāhui mai i te ra o te hokonga, ka kapi i nga hapa o nga rawa me nga mahi i raro i te whakamahinga noa.
For technical assistance, warranty claims, or product inquiries, please contact Maxxima customer service. Refer to the product packaging or the official Maxxima webpae mo nga korero whakapā o naianei.
