Sunco Lighting 4ft LED Shop Light Instruction Manual

1. Nga Korero Haumaru Nui

Please read and understand all instructions before installing or operating this fixture. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause personal injury or property damage.

• WHAKATŪPATO: Te mate o te ru hiko. Momotuhia te hiko i te whakakorikori, i te ara iahiko ranei i mua i te whakaurunga, i te ratonga ranei.
• WHAKATŪPATO: Risk of fire. Keep combustible materials away from the lamp.
• This fixture is intended for indoor use only. Do not use in wet locations or where directly exposed to water.
• Me whakarite te tuku voltage is compatible with the fixture's requirements (120V-277V).
• Me hono ngā waea katoa kia rite ki ngā ture hiko ā-rohe me ā-motu. Mēnā kāore koe i te tino mōhio mō te waea, whakapā atu ki tētahi tohunga hiko whai tohu.
• Kaua e ngana ki te whakarerekē, ki te wetewete rānei i te taputapu. Kāore he wāhanga e taea te whakatika i roto.

2. He aha kei roto i te Pouaka

Manatokona kei te noho nga waahanga katoa i mua i te tiimata o te whakaurunga:

• LED Shop Light Fixture(s)
• Whakamaunga taputapu (tuukiri, punga)
• Linking Cables (1.5" and 8" for daisy-chaining)
• Nati Nati

3. Whakatakotoranga

The fixture features a durable build with an impact-resistant prismatic lens for wide and consistent light dispersion.

This image illustrates key features including impact resistance, the prismatic lens design, non-dimmable functionality, and the wide voltage compatibility of 120-277V.

4. Tatūnga me te Tāuta

Follow these steps for proper installation. Ensure power is disconnected before starting.

4.1. Whakarite mo te Whakauru

1. Whakawetohia te hiko: Locate the circuit breaker controlling the installation area and turn off the power.
2. Remove Diffuser: Gently remove the prismatic diffuser from the lamp base to access the internal components.
3. Tīpako Pawera Tae (CCT): Before mounting, locate the CCT switch inside the fixture. Select your desired color temperature (4000K, 5000K, or 6000K). This setting cannot be changed easily after installation.

This image shows the internal CCT switch, allowing selection between 4000K, 5000K, and 6000K before installation.

4.2. Whakanuia te Whakanoho

The fixture is designed for flush mounting to a ceiling or surface. It includes keyhole slots for easy installation.

1. Tohua nga Tohu Whakakaunga: Hold the fixture in the desired mounting location and mark the positions for the mounting screws. Ensure these align with a junction box or suitable support structure.
2. Tāuta Pūmārō Whakapuru: Drill pilot holes if necessary and install the provided mounting screws, leaving a small gap for the fixture to slide onto.
3. Whakaritea Waea: If connecting to a junction box, knock out the appropriate punch hole on the fixture's housing.

This diagram illustrates the three main steps for installation: securing the housing, connecting electrical wires, and attaching the light fixture.

4.3. Hononga Hiko

1. Tūhono Waea: Using the provided wire nuts, connect the fixture's wires to the supply wires: Live (black) to Live, Neutral (white) to Neutral, and Ground (yellow/green) to Ground. Ensure all connections are secure.
2. Ngā Waea Tuck: Carefully tuck all wires and wire nuts into the junction box or fixture housing.

4.4. Linking Multiple Fixtures (Daisy Chain)

This fixture supports daisy-chaining to extend lighting coverage. Use the provided linking cables.

1. Connect Linking Cable: Insert one end of a linking cable into the designated port on the first fixture and the other end into the port on the next fixture.
2. Hononga Haumaru: Ensure linking cables are securely connected and properly routed.

This image demonstrates how to daisy-chain multiple fixtures using the linking cables and highlights the knockout punch hole for electrical connections.

4.5. Nga Mahi Whakamutunga

1. Reattach Diffuser: Align one end of the diffuser with the aluminum base and push it into place until it snaps securely.
2. Whakaora i te Mana: Turn the circuit breaker back on to restore power to the fixture.

5. Nga Tohutohu Whakahaere

The Sunco Lighting LED Shop Light is designed for straightforward operation once installed.

5.1. Tīpakonga Paemahana Tae (CCT)

This fixture features a selectable color temperature (CCT) switch, allowing you to choose between 4000K (Cool White), 5000K (Daylight), and 6000K (Bright White) to suit your preference or application. The CCT switch is located inside the fixture and must be set during installation before the diffuser is reattached.

• 4000K: Provides a neutral white light, suitable for offices or general workspaces.
• 5000K: Offers a bright, crisp daylight-like illumination, ideal for tasks requiring high visibility.
• 6000K: Delivers a very bright, cool white light, often preferred for industrial settings or areas needing maximum brightness.

This image displays the internal components and wiring, emphasizing the high efficiency of the LED fixture operating within a 120-277V range.

5.2. Te Hiko / Whakaweto

The fixture is non-dimmable and operates via a standard wall switch connected to its power supply. Simply toggle the wall switch to turn the light on or off.

6. Tiaki

The Sunco Lighting LED Shop Light requires minimal maintenance. Always ensure power is disconnected before performing any maintenance.

• Te horoi: Horoia te taha waho o te taputapu ki te wai ngohengohe, maroke, paku rāneiamp cloth. Do not use harsh chemicals or abrasive cleaners, as these can damage the finish or lens.
• Tirotiro: Periodically inspect the fixture for any signs of damage, loose wiring, or wear. If any issues are found, disconnect power and consult a qualified electrician.
• Kore Whakakapi Purama: This fixture uses integrated LEDs, meaning there are no bulbs to replace. The LEDs are designed for a long lifespan of 50,000 hours.

7. Te Raru

If you experience issues with your LED Shop Light, refer to the following common troubleshooting steps:

• Kare te rama e ka ana:
  • Takina te ara iahiko kia mau te hiko.
  • Manatokohia he haumaru, he tika hoki nga hononga waea katoa.
  • Ensure the wall switch is in the ON position.
• Nga korakora marama:
  • Confirm the fixture is not connected to a dimmer switch, as it is non-dimmable.
  • Tirohia mo nga hononga waea korekore.
  • Me whakarite te tuku voltagHe pumau a e, ā, kei roto i te awhe kua tohua.
• Te pāmahana tae hē:
  • The CCT switch must be set before installation. If the diffuser is already installed, carefully remove it to access and adjust the switch.

If these steps do not resolve the issue, contact Sunco Lighting customer support for assistance.

8. Pūtāhui me te Tautoko

E tautoko ana a Sunco Lighting i te kounga o āna hua.

• Pūtāhui: This product is backed by a 3-Year Warranty. Please refer to the official Sunco Lighting website or your purchase documentation for full warranty details and terms.
• Tautoko Kiritaki: For technical assistance, troubleshooting, or warranty claims, please contact Sunco Lighting customer support.