1. Kupu Whakataki
Thank you for choosing the WORKPRO 7.2V Electric Pruning Shears. This manual provides essential information for the safe operation, maintenance, and care of your new tool. Please read it thoroughly before first use and retain it for future reference.
Whakaahua 1.1: Ka mutuview of the WORKPRO 7.2V Electric Pruning Shears and its USB-C charging cable.
2. Nga korero haumaru
Whakaritea i nga wa katoa te haumaru ina whakahaere taputapu hiko. Ki te kore e whai i enei tohutohu ka puta pea he ru hiko, he ahi, he whara kino/ranei.
Whakatupato Haumaru Whanui:
- Panuitia nga Tohutohu Katoa: Kia mōhio koe ki ngā āhuatanga mahi me ngā āhuatanga haumaru o te taputapu.
- Kia Mārama te Wāhi Mahi: Ko nga waahi kapi, pouri ranei ka pa mai nga aitua.
- Aukati i nga Taiao Kino: Kaua e whakamahia nga taputapu hiko i damp ki nga waahi maku ranei, ka waiho ranei ki te ua.
- Kakahuria ngā Taputapu Tiaki Whaiaro (PPE) e tika ana: Always wear safety glasses, gloves, and sturdy footwear.
- Noho mataara: Pay attention to what you are doing and use common sense. Do not operate the tool when tired or under the influence of drugs, alcohol, or medication.
- Whakamaua te Mea Mahi: Whakamahia clamps or other practical ways to secure the workpiece to a stable platform.
- Kaua e Whakanuia: Kia mau tonu te turanga me te taurite i nga wa katoa.
- Rokiroki Utauta Mangere: Ki te kore e whakamahia, me penapena nga taputapu ki tetahi waahi maroke, teitei, kati ranei, kei taea e nga tamariki.
- Tiakina nga Utauta: Kia mau ki te tapahi taputapu koi me te ma kia pai ake ai te mahi. Whaia nga tohutohu mo te whakahinuhinu me te whakarereke i nga taputapu.
- Tirohia mo nga waahanga kua pakaru: I mua i te whakamahinga anō, me āta tirohia te parepare, tetahi atu wāhanga rānei kua pakaru, kia mōhio ai mēnā ka tika te mahi, ā, ka tutuki hoki i a ia tana mahi.
Specific Pruner Safety:
- Mōrearea Mata: The blades are extremely sharp. Keep fingers and body parts away from the blades during operation.
- Dual Switch Operation: This tool features a dual-action switch for safety. Both the main trigger and the safety switch must be pressed simultaneously to operate the blades. Keep the switch pressed throughout the cutting operation.
- Wewete i te wa e kore e whakamahia: Always disconnect the charging cable when the tool is not in use, before servicing, or when changing accessories.
- Haumaru Pūhiko: Use only the specified charging method. Do not incinerate the battery or expose it to high temperatures.
3. Hua Neke Atuview me nga Waehanga
The WORKPRO 7.2V Electric Pruning Shears are designed for efficient and effortless pruning tasks. Key features include:
- High-Quality SK5 Blades: Durable and sharp for clean cuts.
- Motika pai: Provides powerful performance with reduced noise.
- Marama LED-roto: Illuminates the cutting area for improved visibility in low light.
- Hoahoa Maamaa: Weighs approximately 1.9 pounds (0.86 kg) for comfortable, extended use.
- Pātene Haumaru Takirua: Ka aukati i te whakahohe ohorere.
- Te Kaha Tapahi Rawa: 20mm (0.8 inches) for fresh branches.
Whakaahua 3.1: Taipitopito view highlighting the maximum cutting capacity, special gear system, constant light, and safety protection features.
Image 3.2: Close-up of the SK5 blade, designed for smooth cuts without damaging bark.
Image 3.3: Illustration of the internal powerful motor, indicating high efficiency and strong load capacity.
4. Tatūnga
Te Whakataki i te Pūhiko:
- Ensure the pruning shears are turned off.
- Locate the Type-C charging port on the tool.
- Connect the provided USB-C charging cable to the port on the shears and plug the other end into a compatible USB power adapter (not included) or a USB port.
- The charging indicator light will show the charging status. A full charge typically takes 4-5 hours.
- Kia oti te whakakii, momotuhia te taura utu.
The tool is equipped with two 3.6V, 2000mAh Lithium-Ion batteries.
5. Nga Tohutohu Whakahaere
Activating the Shears:
- Me whakarite kei te utaina te pākahiko.
- To activate the shears, first press the main trigger, then simultaneously press the safety switch located on the handle.
- Keep both switches depressed throughout the cutting operation. Releasing either switch will cause the blades to open immediately and the tool to stop.
Image 5.1: Proper hand placement for operating the dual safety switch, ensuring safe activation.
Tikanga tapahi:
- Whakaturia te manga ka tapahia ki waenganui i nga matatahi e tuwhera ana.
- Ensure the branch diameter does not exceed 20mm (0.8 inches) for fresh branches. Attempting to cut thicker branches may damage the tool or result in an incomplete cut.
- Activate the shears as described above. The blades will close to make the cut.
- Release the switches to allow the blades to open for the next cut.
- For slightly thicker branches within the tool's capacity, multiple 'bites' can be taken to gradually cut through.
Image 5.2: Visual representation of the 20mm (0.8 inch) maximum cutting diameter for effective pruning.
Nga tono:
These electric pruning shears are suitable for a variety of gardening tasks, including:
- Pruning trees and shrubs
- Pruning fruit trees
- Pruning grapevines
- Pruning flowers and ornamental plants
- General garden and landscape maintenance
- Harvesting fruit
Whakaahua 5.3: Examples of multiple uses for the electric pruning shears in different gardening scenarios.
6. Tiaki
Regular maintenance ensures the longevity and optimal performance of your pruning shears.
- Whakapai Mata: I muri i ia whakamahinga, horoia ngā mata ki te hinuamp cloth to remove sap, dirt, and debris. For stubborn residue, use a mild cleaning solution. Ensure blades are dry before storage.
- Whakahinuhinu Mata: Periodically apply a light coat of machine oil or specialized blade lubricant to the cutting blades to prevent rust and ensure smooth operation.
- Rokiroki: Store the pruning shears in a dry, secure location, away from direct sunlight and extreme temperatures. Ensure the safety switch is engaged and the blades are closed.
- Tiaki Pūhiko: Do not store the tool with a completely discharged battery. Recharge the battery periodically if the tool is not used for extended periods.
7. Te Raru
If you encounter issues with your WORKPRO Electric Pruning Shears, refer to the following common troubleshooting steps:
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Shears do not turn on/operate | Kua tukuna te pati Karekau te pana haumaru i uru Main trigger not pressed | Whakatakina katoatia te pākahiko Ensure both main trigger and safety switch are pressed simultaneously Check charging cable connection |
| Blades do not cut cleanly or get stuck | He puhoi, he paru ranei nga mata Cutting branches too thick Sap or debris buildup | Clean and lubricate blades; consider professional sharpening if severely dull Ensure branch diameter is within 20mm (0.8 inches) capacity Clean blades thoroughly after each use |
| Tool stops unexpectedly (freezes up) | Kua whakahohehia te parenga taumaha He iti te pākahiko Te take o roto | Release switches, allow tool to cool, then restart. Avoid forcing cuts on overly thick branches. Whakaorangia te pākahiko. Mena ka mau tonu te raruraru, whakapā atu ki te tautoko kiritaki. |
| Karekau te pākahiko e utu ana | Charging cable or adapter faulty Kua poke te tauranga utu take pākahiko | Whakamātauria he taura USB-C rerekē me te pūurutau hiko Clean charging port gently Contact customer support if battery is suspected to be faulty |
8. Whakatakotoranga
| Āhuahira | Whakatakotoranga |
|---|---|
| Waitohu | WORKPRO |
| Tau tauira | W159049AE |
| Puna Mana | Pūhiko Powered |
| Voltage | 7.2 Volts |
| Wattage | 7.4 Watt-haora |
| Momo Pūhiko | 2 pākahiko Lithium Ion (kei roto) |
| Rauemi Mata | SK5 Metal |
| Rauemi Kakau | Kirihou, Nylon |
| Max Tapahi Diamita | 20 mm (0.8 Inihi) |
| Taumaha Tūemi | 1.9 pauna (tata ki te 0.86 kg) |
| Tauranga Whakatau | Momo-C |
| UPC | 820909605089 |
9. Pūtāhui me te Tautoko
WORKPRO is committed to providing a positive customer experience. If you have any questions, concerns, or require assistance with your WORKPRO tools, please contact our customer support. Refer to your purchase documentation for specific warranty details and contact information.
For further assistance, please visit the official WORKPRO webpaetukutuku, whakapā atu rānei ki te kaihoko.
