Kupu Whakataki
The Baseus BS-CH001 is a versatile device designed to provide emergency jump-starting for 12V vehicles and serve as a portable power bank for charging electronic devices. With a 10000mAh capacity and a peak current of 1000A, it offers a reliable solution for unexpected car battery issues and on-the-go power needs. This manual provides essential instructions for safe and effective use.
Note: Product images and videos are not included in this manual due to a discrepancy between the product description and the available media assets.
Ihirangi mokete
Tena koa tirohia te kete mo nga mea e whai ake nei:
- 1 x Baseus Car Jump Starter
- 1 x Smart Jump Starter Clamp Cable (with red and black alligator clips)
- 1 x USB ki te Momo-C Uera Whakatau
Nga waahanga matua
- Mahinga Nui: 10000mAh capacity, 12V start voltage, 500A starting current, and 1000A peak current.
- Mahi-maha: Acts as both a car jump starter and a portable power bank.
- Reliable Starts: Capable of starting a car up to 50 times on a single full charge.
- Whakaaturanga Whakauru: Digital screen shows the remaining battery level of the jump starter.
- Te Paemahana Tino: High-performance polymer battery cells ensure operation in very low and high temperatures.
- Haumaru Ake: Features 9 levels of protection including overcharge, voltage stabilization, short circuit, over-discharge, reverse connection, and over-temperature protection.
- Low Standby Power: Retains up to 85% of stored energy after one year of non-use.
- Marama LED-roto: Can be used as an emergency flashlight.
- Kawe: Compact size and technical parameters allow it to be carried on an airplane.
Nga korero haumaru
Pānuihia ngā whakatūpato me ngā tohutohu haumaru katoa i mua i te whakamahinga o tēnei hua. Ki te kore e whai i ēnei tohutohu, ka pāngia pea koe e te ru hiko, te ahi, me/ranei te whara kino.
- Kaua e wetewete, whakarereke, whakatikahia ranei te taputapu.
- Kaua e tukuna te taputapu ki te ua, ki te makuku ranei.
- Do not use the device if the battery clamps kua pakaru ranei nga taura.
- Me whakarite kia tika te hononga polarity (whero clamp ki pai, pango clamp to negative) to avoid short circuits.
- Kaua e taea e nga tamariki.
- Kaua e peke ka timata i te pākahiko tio.
- Kaua e honoa te pai me te kino clamps tahi.
- Whakamahia te taputapu i roto i te waahi pai-hau.
- Remove the jump starter from the car battery immediately after starting the vehicle.
- Whakaorangia te taputapu ki te waahi makariri, maroke ina kore e whakamahia.
Setup: Charging the Jump Starter
Before first use, fully charge the jump starter. It is recommended to charge the device every 3-6 months to maintain battery health, even when not in use.
- Connect the provided USB to Type-C charging cable to the Type-C input port on the jump starter.
- Connect the other end of the USB cable to a suitable USB power adapter (e.g., 5V/2.4A, not included).
- The digital display will show the charging progress. Charge until the display indicates 100%.
- Kia oti te whakakii, momotuhia te taura utu.
Operating Instructions: Car Jump Starting
Āta whai i ēnei mahi hei whakaoho tere i tō waka:
- Step 1: Connect the Smart Clamp Tauera
Insert the smart jump starter clamp cable into the EC5 interface of the Baseus jump starter. The flashing red and green lights on the clamp indicate it's ready for connection to the car battery.
- Step 2: Connect to Car Battery
Open your car's hood. Connect the red positive (+) clamp to the positive (+) terminal of your car battery. Connect the black negative (-) clamp to the negative (-) terminal of your car battery. Ensure a secure connection.
- Step 3: Start the Vehicle
Return to your car and start the engine. If the car does not start immediately, wait a few seconds and try again. Do not crank the engine for more than 3 seconds at a time, and wait at least 30 seconds between attempts.
- Hipanga 4: Momotu
Once the car engine starts, immediately remove the smart jump starter clamp cable from the car battery terminals, then disconnect it from the jump starter. Do not drive with the jump starter connected.
Operating Instructions: Power Bank Function
The Baseus BS-CH001 can also be used to charge your electronic devices.
- Connect your device's charging cable (e.g., USB to Type-C, USB to Lightning) to the USB output port on the jump starter.
- Honoa te pito kē atu o te taura ki tō pūrere hiko.
- The jump starter will automatically begin charging your device. The digital display will show the remaining power.
- Once charging is complete, disconnect your device and the cable.
Te tiaki
- Horoia te taputapu ki te kakahu maroke, ngawari. Kaua e whakamahi i nga kai horoi me nga whakarewa.
- Penapenahia te tīmatanga peke ki te wāhi hauhautanga, maroke, kia matara atu i te rā tika me te pāmahana tino kino.
- For optimal battery life, fully charge the device at least once every 3-6 months.
- Kia mau ki te clamp cables clean and free from corrosion.
Raparongoā
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Kaore e tahuna te taputapu. | Kua pau te pākahiko. | Whakakīia katoatia te pūwhakaoho peke. |
| Car does not start. | hē clamp hononga. | Me whakarite clamps are connected to the correct battery terminals (red to +, black to -). |
| Car does not start. | Car battery is severely damaged or frozen. | Consult a professional mechanic. Do not attempt to jump start a frozen battery. |
| Ka wera te taputapu i te wā e whakamahia ana. | Normal operation during high current discharge. | This is normal. If it becomes excessively hot or emits smoke, discontinue use immediately. |
| Electronic device not charging. | Jump starter battery low or cable issue. | Ensure jump starter is charged. Check if the charging cable is properly connected and functional. |
Whakatakotoranga
| Waitohu | Baseus |
| Tauira | BS-CH001 |
| Te kaha | 10000 mAh / 3.7V / 37 Wh |
| Whakauru Voltage (Type-C) | 5V/2.4A (Mōrahi) |
| Te Mana Putanga USB | 5V/2.4A (Mōrahi) |
| Tīmata Voltage | 12V |
| Tīmata Naianei | 500A |
| Pūkenga o nāianei | 1000A |
| Taumaha | 470g |
| Ahu | 10 x 5 x 5 cm (approximate, based on product description) |
Pūtāhui me te Tautoko
This product comes with a standard manufacturer's warranty. For detailed warranty information, please refer to the warranty card included in your product packaging or visit the official Baseus webpae. Mō te tautoko hangarau, te āwhina rapurongoā, te pātai rānei mō ngā wāhanga whakakapinga, whakapā atu ki te ratonga kiritaki a Baseus mā ā rātou hongere mana.
Kia mōhio: Kāore i whakaratohia he wā pūtāhui motuhake, he mōhiohio whakapā tautoko rānei i roto i ngā raraunga hua. Tirohia ngā rauemi mana a te kaihanga.
