Kupu Whakataki
This manual provides detailed instructions for the installation, operation, and maintenance of your Shine Decor 120V Driverless LED Strip Light. Please read this manual thoroughly before installation and use to ensure safe and optimal performance of the product.
The Shine Decor LED Strip Light is a super bright, plug-and-play lighting solution designed for both indoor and outdoor applications. It features driverless wiring, flicker-free operation, and weatherproof construction, making it versatile for various lighting needs.
Nga korero haumaru
- Haumaru Hiko: Always disconnect power before installing, cutting, or performing any maintenance on the LED strip light. Ensure the power source matches the product's voltage (120V).
- Parewai: The LED strip is IP65 rated for splashproof use. However, if the strip is cut and reconnected, additional waterproofing measures (e.g., silicone glue, waterproof box for connections) are required to maintain its integrity, especially for outdoor use. The power plug should always be kept indoors or in a waterproof enclosure when used outdoors.
- Tapahi: Only cut the LED strip at designated cutting marks (every 3.9 inches / 10 cm). Cutting elsewhere will damage the strip and void the warranty.
- Tāutatanga: Ensure the mounting surface is clean, dry, and smooth for proper adhesion. For stronger installation, especially outdoors or on rough surfaces, use the provided mounting clips and screws.
- Rirotoro piko: Do not bend the strip beyond its minimum bending radius of 1.18 inches (3 cm) to prevent damage to the internal components.
- Awhe Pawera: The product is designed to operate within a temperature range of -4°F to 122°F (-20°C to 50°C).
Ihirangi mokete
Manatokohia ko nga mea katoa kei raro nei kei roto i to kete:
- 1x Shine Decor LED Strip Light (32.8 Ft Warm White) with Power Cord
- 30x Whakaekenga Topenga
- 60x Tiuri
- 2x Whakamutunga Potae
- 1x Manual Kaiwhakamahi
Image: Contents of the Shine Decor LED Strip Light package, showing the coiled light strip with power cord, mounting clips, screws, end caps, and the user manual.
Tatūnga me te Tāuta
Whāia ēnei mahi hei tāuta tika i tō rama LED:
Initial Test and Placement
- Unfold and Test: Unfold the entire light strip and plug it into a 120V power outlet to test its functionality immediately upon receiving. Ensure all LEDs illuminate correctly.
- Whakanoho Mahere: Determine the desired location for your LED strip. Ensure the surface is clean, dry, and free of dust or grease.
Image: The Shine Decor LED Strip Light, showing the product box and the coiled light strip with its power plug, illustrating the product's appearance before installation.
Cutting and Splicing (Optional)
The LED strip can be cut and reconnected to fit specific lengths. Note: DIY cutting and reconnecting may void the warranty if not performed correctly and waterproofed.
- Momotu Mana: Always unplug the light strip from the power source before cutting.
- Ine ka Tapahia: Measure the desired length. The strip has cutting marks every 3.9 inches (10 cm). Use sharp scissors or a utility knife to cut precisely along these marks.
- Prepare for Connection: Peel off approximately one inch of the backing tape from both ends of the cut strip to expose the contact points.
- Kōkuhu ki te Tūhono: Insert the prepared ends of the strip into a clear plastic connector (not included, search ASIN B0C993CGMX or B0CQCSR2D9 for compatible connectors). Ensure the light strip is inserted in the correct direction for proper electrical contact.
- Hononga Haumaru: Press the light strip firmly into the middle position of the buckle on the connector. Ensure the copper thorns inside the buckle pierce the light strip to establish a secure electrical connection. Repeat for the other side of the connection.
- Attach End Cap: If you are ending a section, attach an end cap to the cut end of the light strip. Secure all connections and end caps with silicone glue to ensure waterproofing.
- Whakamātautau: Plug in the light strip to test the connection and ensure it illuminates correctly.
Video: Instructions for cutting and reconnecting the Shine Decor LED Strip Light. This video demonstrates how to safely cut the strip at designated marks, prepare the ends, and use connectors to splice sections together, emphasizing the importance of proper sealing for waterproofing.
Image: A visual guide demonstrating the process of cutting the LED strip at the marked intervals and connecting two sections using a connector, highlighting the driverless design.
Mounting the Light Strip
There are two primary methods for mounting the LED strip:
- Tautoko Piripiri: The strip features a self-adhesive white backing tape. Peel off the protective film and firmly press the strip onto the desired clean, dry, and smooth surface.
- Mounting Clips and Screws: For a more secure installation, especially on uneven surfaces or for outdoor use, utilize the provided mounting clips and screws. Space the clips evenly along the strip to provide adequate support.
Image: Illustration of two installation methods: using the self-adhesive backing for indoor applications and securing the strip with mounting clips and screws for outdoor or more permanent installations.
Image: Close-up of the LED strip's adhesive backing, demonstrating the "peel and stick" installation method.
Nga Tohutohu Whakahaere
The Shine Decor LED Strip Light is designed for simple plug-and-play operation.
- Hiko Whakaka/Weto: Plug the power cord into a standard 120V AC outlet to turn the light strip on. Unplug it to turn it off.
- Ngahuru (Kōwhiringa): This LED strip light is dimmable, but a dimmer is not included. For dimming functionality, you can purchase the Shine Decor universal dimmer kit (ASIN: B0C992QJWZ). When using a dimmer, the maximum running length may be shortened to 40 meters (131 feet).
Image: The LED strip light connected to an optional dimmer and its remote control, illustrating how dimming functionality can be added.
Te tiaki
- Te horoi: Ensure the light strip is unplugged before cleaning. Use a soft, dry cloth to gently wipe the surface. Do not use harsh chemicals or abrasive cleaners.
- Tirotiro: Periodically inspect the light strip and all connections for any signs of damage, wear, or loose connections. Address any issues promptly.
- Waterproofing Integrity: For outdoor installations, regularly check the integrity of all waterproof seals, especially at cut and reconnected points, and reapply silicone glue if necessary.
Raparongoā
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Light strip does not illuminate. |
|
|
| Section of the light strip is not working. |
|
|
| Ka whiti nga rama. |
|
|
Whakatakotoranga
| Āhuahira | Taipitopito |
|---|---|
| Tau tauira | dedbdf83-74c9-4c43-9e71-f052700b0a92 |
| Tae | Ma whakamahana (2800K) |
| Te roa | 32.8 Puawai (10 mita) |
| Voltage | 120 Volts AC |
| Rerewharewha | 8000 Lumens (800 Lms/Meter) |
| Wattage | 100 Watts (10W/Meter) |
| Puna LED | SMD 2835 (36 LEDs/Ft, 120 LEDs/Meter) |
| Whakatauranga parewai | IP65 (Taupiri) |
| Rauemi | Food-grade Silicone Shell |
| Wae tapahi | 3.9 inihi (10 cm) |
| Max. Running Length | 164 Feet (50 meters) per power cord (131 feet / 40 meters with dimmer) |
| Rorohiko Piko iti | 1.18 inihi (3 cm) |
| Te Waahi Mahi | -4°F ki te 122°F (-20°C ki te 50°C) |
| Tiwhikete | ETL kua raarangi |
| Nga waahanga motuhake | Driverless, Peel & Stick, Flicker-Free, Cold Resistant, Dimmable (with optional dimmer) |
Image: A graphic displaying key specifications of the LED strip light, including voltage, power, lumen output, dimensions, and certifications.
Pūtāhui me te Tautoko
Shine Decor products are designed for quality and durability. For warranty information, please refer to the specific warranty card included with your product or visit the official Shine Decor webpae.
If you encounter any issues or have questions regarding your LED strip light, please contact Shine Decor customer support through the retailer where you purchased the product or via the contact information provided on the official Shine Decor webpae.
For additional accessories like extra power cords (ASIN: B0C9948N1H), dimmers (ASIN: B0C992QJWZ), or connectors (ASIN: B0C993CGMX, B0CQCSR2D9), please search for these ASINs on the retailer's webpae.
