Nga Korero Haumaru Nui
Please read all instructions carefully before using this electric fireplace heater. Failure to follow these instructions may result in fire, electric shock, serious injury, or property damage. Retain this manual for future reference.
- Me whakarite te putanga hiko voltage matches the rating of the heater.
- Do not operate the heater with a damaged cord or plug. If the cord or plug is damaged, contact qualified service personnel.
- Keep combustible materials such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 meters) from the front of the heater and away from the sides and rear.
- Kaua e whakamahia te whakamahana i roto i ngā kaukau, i ngā wāhi horoi kakahu, i ngā wāhi rite rānei o roto e pā pea ki te wai.
- Wewetehia te whakamahana i nga wa katoa ka kore e whakamahia.
- Do not insert or allow foreign objects into any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
- Ko tenei taputapu kua rite ki te Tiwhikete CSA, ensuring it meets safety standards.
- The heater includes whakamarumaru wera, which automatically shuts off the unit if it reaches an unsafe temperature.
- It also features whakamarumaru ki runga ake, automatically shutting down if tilted more than 45 degrees.
Ihirangi mokete
Before beginning assembly, ensure all parts are present and undamaged. If any parts are missing or damaged, do not attempt to assemble or operate the heater. Contact customer support for assistance.
- Silonn Electric Fireplace Heater Unit
- 4 x Waewae
- Ngā tīwiri mō te whakapiri waewae
- Phillips Screwdriver (for assembly)
Tohutohu Tatūnga
Follow these steps to set up your electric fireplace heater.
- Wewetehia te Waehe: Carefully remove the electric fireplace heater and all components from the packaging. Retain packaging for future storage or shipping.
- Whakapirihia nga Waewae: Place the main heater unit upside down on a soft, non-abrasive surface to prevent scratching. Align each of the four legs with the designated mounting points on the bottom of the heater. Secure each leg using the provided screws and Phillips screwdriver. Ensure all screws are tightened securely.
- Whakanohoia te Whakawera: Once the legs are attached, carefully turn the heater upright and place it on a firm, level surface. Ensure there is adequate clearance from walls, furniture, and other combustible materials (at least 3 feet). Do not block the air intake or exhaust vents.
- Tūhono ki te Hiko: Plug the power cord into a grounded 120V AC outlet. Ensure the outlet is in good condition and not overloaded with other appliances.
Nga Tohutohu Whakahaere
Your Silonn Electric Fireplace Heater offers both heating and a realistic flame effect. The control panel is located on the side of the unit.
Paewhiri Mana Neke Atuview
- Puma Mana Mana: A rotary knob used to adjust the desired room temperature from 62°F to 82°F. The heater will cycle on and off to maintain the set temperature.
- Whakawhiti Kaha: Controls the main power to the unit, including the flame effect.
- Heat Switch: Activates or deactivates the heating function. This allows you to enjoy the flame effect without heat.
Mahi Taketake
- Whakakā: Flip the Power Switch to the 'ON' position. The realistic 3D flame effect will illuminate.
- Whakahohe Wehana: To enable heating, flip the Heat Switch to the 'ON' position.
- Tautuhi i te Pamahana: Rotate the Temperature Control Knob to your desired temperature setting between 62°F and 82°F. The heater will begin to emit warm air.
- Adjust Flame Only: If you wish to enjoy only the flame effect without heat, ensure the Power Switch is 'ON' and the Heat Switch is 'OFF'.
- Whakaweto: To turn off the heater, first flip the Heat Switch to 'OFF' (if heating was active), then flip the Power Switch to 'OFF'. For extended periods of non-use, unplug the unit from the wall outlet.
Te tiaki
Ko te tiaki i nga wa katoa ka tino pai te mahi me te roa o to whakamahana ahi ahi hiko.
- Te horoi: Momotuhia te pūhiko o te whakamahana i te putanga hiko, ā, waiho kia whakamatao rawa i mua i te horoinga. Whakamahia he mea ngohengohe, he mea whakamahana.amp cloth to wipe the exterior surfaces. Do not use abrasive cleaners, sprays, or harsh chemicals. Ensure no water enters the interior of the heater.
- Tango Puehu: Periodically use a vacuum cleaner with a brush attachment to clean the air intake and exhaust vents to prevent dust buildup, which can affect heating efficiency.
- Rokiroki: Ki te kore e whakamahia mō te wā roa, rongoatia te whakamahana ki te wāhi hauhautanga, maroke, ko te mea pai ko roto i tōna takai taketake, kia matara atu i te rā tika me te makuku.
Raparongoā
If you encounter issues with your Silonn Electric Fireplace Heater, refer to the following common problems and solutions.
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Kare te whakamahana e ka ana. | No power to the unit; Power switch is off; Overheat protection activated; Tip-over protection activated. | Check if the unit is plugged in securely. Ensure the wall outlet is functional. Flip the Power Switch to 'ON'. If the unit was recently overheated or tipped, unplug it, wait 10-15 minutes for it to reset, and then plug it back in. |
| Karekau he wera, engari ka mahi te awenga mura. | Heat switch is off; Temperature setting is too low. | Flip the Heat Switch to 'ON'. Increase the Temperature Control Knob setting to a higher temperature. |
| He iti rawa te wera o te whakamahana. | Room size is too large for the heater's capacity; Air vents are blocked. | Ensure the heater is appropriate for the room size. Clear any obstructions from the air intake and exhaust vents. |
| Haruru rerekee, hongi ranei. | Dust buildup; Internal component issue. | Unplug the unit and clean the vents. If the issue persists, discontinue use and contact customer support. |
If the problem persists after attempting these solutions, please contact Silonn customer support for further assistance.
Whakatakotoranga
| Waitohu | Silonn |
| Ingoa Tauira | SLELF01B-18 |
| Rahi Hua (D x W x H) | 14.8" x 8.98" x 18.03" |
| Wattage | 1400W |
| Rauemi | Cold Rolled Plate |
| Taumaha Tūemi | 13.88 pauna |
| UPC | 810158822979 |
| Tiwhikete Haumaru | CSA Tiwhikete |
| Taumata Haruru | Kei raro iho i te 37 dB |
Pūtāhui me te Tautoko
For warranty information, please refer to the documentation included with your purchase or contact Silonn customer support directly. Details regarding product registration, warranty claims, and technical assistance can typically be found on the manufacturer's official webpaetukutuku, mā te whakapā atu rānei ki tā rātou tari ratonga kiritaki.
For further assistance or inquiries, please visit the official Silonn webpaetukutuku, whakapā atu ranei ki ta raatau roopu tautoko kaihoko.
