Pukapuka Kaiwhakamahi mō te Pahikara Maunga Hiko Vivi H7

Kupu Whakataki

Welcome to the world of electric cycling with your new Vivi H7 Electric Mountain Bike. This manual provides essential information for the safe assembly, operation, and maintenance of your e-bike. Please read it thoroughly before your first ride to ensure optimal performance and safety.

The Vivi H7 Electric Mountain Bike, ready for adventure.

Nga Korero Haumaru Nui

Your safety is paramount. Always wear a helmet when riding. Ensure all components are correctly assembled and tightened before each use. Do not operate the e-bike under the influence of alcohol or drugs. Be aware of your surroundings and obey all local traffic laws.

• Always perform a pre-ride inspection.
• Kia mōhio koe ki ngā ture o te rohe mō ngā pahikara hiko.
• Kaua e neke ake i te kaha o te kawenga o te 330 lbs.
• Kia matara nga ringa me nga waewae i nga waahanga neke.

Ihirangi mokete

Upon opening your Vivi H7 package, please verify that all the following components are present:

Ka mutuview of all components included in the Vivi H7 Electric Bike package.

• Vivi H7 Electric Bike Frame (partially assembled)
• Wira o Mua
• Pūhiko Ritiumu-ion 48V 10.4Ah Tangohia
• Pūhiko Pūhiko
• Pedals (Mauī me Matau)
• Noho me te Pouturu Noho
• Ngā Ārai o Mua me Muri
• Maramarama
• Tool Kit (including wrenches and Allen keys)
• Pukapuka Kaiwhakamahi (tenei tuhinga)

Nga Tohutohu Huihuinga

Your Vivi H7 Electric Mountain Bike comes partially assembled. Follow these steps carefully to complete the assembly. For a visual guide, please refer to the official installation video provided below.

1. Tautanga Pae kakau

Carefully remove the handlebar from the packaging. Loosen the bolts on the stem clamp using the appropriate Allen key from your tool kit. Position the handlebar into the stem, ensuring it is centered and the brake levers and shifters are in a comfortable and accessible position. Tighten the bolts evenly to secure the handlebar. (Refer to video: 0:01 - 0:36)

2. Whakamutunga Wira o mua

Remove the protective cap from the front fork. Carefully lift the front of the bike and align the front wheel's axle with the fork dropouts. Ensure the disc brake rotor slides correctly into the brake caliper. Install the axle nuts and tighten them securely using the provided wrench. (Refer to video: 0:37 - 1:09)

3. Headlight Installation

Locate the headlight and its mounting bracket. Attach the headlight to the designated mounting point on the front fork or handlebar using the provided screws and Allen key. Connect the headlight cable to the corresponding port on the bike's wiring harness. (Refer to video: 1:10 - 1:28)

4. Tāutanga Pedal

Identify the left (L) and right (R) pedals. The left pedal has a reverse thread. Apply a small amount of grease to the pedal threads. Screw the left pedal counter-clockwise into the left crank arm and the right pedal clockwise into the right crank arm. Tighten firmly with a wrench.

5. Seat Post Installation

Insert the seat post into the seat tube of the bike frame. Adjust the seat height to a comfortable riding position, ensuring your feet can touch the ground when stopped. Secure the seat post by closing the quick-release lever or tightening the seat post clamp tutaki.

6. Fender Installation

Attach the front and rear fenders to their respective mounting points on the fork and frame using the provided hardware. Ensure they are securely fastened and do not interfere with wheel rotation.

Nga Tohutohu Whakahaere

Understanding the functions of your Vivi H7 e-bike will enhance your riding experience.

Te Hia/Weto

To power on the e-bike, press and hold the power button on the LED display. To power off, press and hold the same button. The display will show battery level, speed, and assist mode.

Motor and Speed Modes

The Vivi H7 is equipped with a 500W high-speed brushless hub motor, capable of reaching a max speed of 20 MPH. It features 4 working modes:

• Ebike Mode: Full electric power, no pedaling required.
• Assisted Bicycle Mode (Pedal Assist): The motor provides assistance as you pedal. You can choose the electric assist power according to your needs via the LED meter button.
• Aratau Paihikara Punoa: Eke pahikara rite tonu ki te pahikara tuku iho, kāore he āwhina mōtini.
• Aratau Whakatairanga: Provides extra power, helpful when pushing the e-bike uphill.

Illustration of the powerful 500W motor, highlighting its 600 Watt peak output and 20 MPH max speed.

Taipitopito view of the 500W powerful brushless motor, emphasizing high speed and low consumption.

Huri Hurihuri

The bike features a professional 21-speed gear system (Front 3 Speed Gears, Rear 7 Speed Gears). Use the shifters on the handlebars to change gears according to terrain and desired speed. This increases hill-climbing power and provides greater terrain adaptability.

Ka mutuview of the handlebar controls, including the smart dashboard, throttle, and gear shifters, along with the dual disc brake system.

Te Whakamahinga Pūhiko me te Whakatau

The 48V 10.4Ah (499.2Wh) removable lithium-ion battery provides a range of up to 50 miles on a single charge. It fully charges in 4-6 hours. The removable design allows for convenient charging anywhere. The battery is UL 2849 certified for safety.

Visual representation of the 48V-10.4AH Lithium Ion Battery, showing estimated range for electric and pedal-assist modes, charging time, and built-in waterproof features.

Pūnaha Piripiri

The Vivi H7 is equipped with front and rear dual disc brakes, providing reliable and ample stopping power for enhanced safety.

Kati-ake view of the front and rear disc brakes, highlighting their effectiveness in providing stopping action.

Tires and Suspension

The 27.5-inch all-terrain tires combined with a high-strength suspension fork allow you to conquer various road conditions, including gravel, highway, and meadow trails.

Graphic illustrating the 27.5-inch all-terrain tires and their suitability for various surfaces like gravel, highway, and meadow.

Banner showcasing the 27.5-inch all-terrain tire and high-strength suspension fork, designed to conquer any road.

Te tiaki

Regular maintenance will prolong the life of your Vivi H7 e-bike and ensure safe operation.

• Te horoi: Horoia te anga ki te pānuitangaamp kakahu. A ape i te horoi pehanga nui ki runga i nga waahanga hiko.
• Tire: Check tire pressure regularly (recommended pressure is usually on the tire sidewall). Inspect for wear and tear.
• Parai: Periodically check brake pads for wear and ensure brake levers engage properly. Adjust cable tension if necessary.
• mekameka: Kia ma te mekameka, kia pania hoki ki te hinu whakahinuhinu kia maeneene ai te whakawhiti taputapu, kia kore ai hoki e waikura.
• Pūhiko: Whakaorangia te pākahiko ki te waahi makariri, maroke. Mena ka penapena mo nga wa roa, utu ki te 50-70% ia 2-3 marama.
• Ngā toromoka: Regularly check all bolts and nuts for tightness, especially on the handlebars, wheels, and seat post.

Raparongoā

Anei etahi take noa me o raatau otinga ka taea:

Whakatakotoranga

Size chart and dimensions for the Vivi H7 Electric Mountain Bike, including recommended rider height and load capacity.

Pūtāhui me te Tautoko

Vivi offers a 1-year service warranty for the electric motor, battery, and other main replaceable parts. This ensures peace of mind regarding the durability and performance of your e-bike.

For any problems or inquiries, please do not hesitate to contact our customer support. We are committed to replying to you within 24 hours.

You can find more information and contact details by visiting the official Vivi Store: Vivi Store on Amazon

Customer Support is available to assist you with any issues.