AQQA LED Aquarium Light User Manual

1. Kupu Whakataki

Thank you for choosing the AQQA LED Aquarium Light. This manual provides detailed instructions for the safe and efficient operation of your new aquarium light. Designed for optimal plant growth and vibrant aquatic environments, this light offers advanced features including 24/7 natural light simulation, DIY customization, and a convenient memory function. Please read this manual thoroughly before installation and use.

Whakaatu 1.1: Neke Atuview of the AQQA LED Aquarium Light and its components.

2. Nga Tohutohu Haumaru

Hei whakarite i te mahi haumaru me te aukati i te kino, me whai i nga whakatupato e whai ake nei:

• Me momotu te pūnaha hiko i mua i te mahi i tētahi mahi tiaki, tāutanga rānei.
• This product is designed for indoor use with aquariums only. Do not use it for purposes other than its intended use.
• Ensure your hands are dry when handling the power plug or controller.
• Do not immerse the controller or power adapter in water. The light fixture itself is IP68 waterproof.
• Kaua e taea e nga tamariki.
• Do not operate if any part of the light or power cord is damaged. Contact customer support for assistance.
• Ensure the light is securely clipped to the aquarium before powering on.

3. Ihirangi mokete

Manatokona kei roto katoa nga mea kei roto i te kete:

• 1 x AQQA Aquarium Light
• 1 x Kaiwhakahaere

4. Nga Hua o te Hua

The AQQA LED Aquarium Light is equipped with advanced features to enhance your aquatic environment:

• Hanganga Kounga teitei: Features a widened and thickened aluminum shell for durability and efficient heat dissipation. Utilizes premium 5050 and 2835 LEDs for optimal plant growth.
• Aratau DIY: Allows simultaneous adjustment of brightness, color, and timing. Offers 5 levels of brightness (10%-100%), 3 timer settings (6H/10H/12H), and 7 light colors plus full spectrum and auto color cycle.
• Aratau Taunoa 24/7: Simulates natural light cycles, transitioning from warm orange at sunrise to bright full-spectrum at noon, and starry blue at night. Default on/off times are 6 AM and 10:58 PM, which can be adjusted.
• Flexible Adjustable Design: A 7-inch 360° flexible gooseneck tube allows for easy angle and direction adjustment. The aluminum alloy clip with tightening screws ensures secure mounting on framed or frameless aquariums up to 0.9 inches thick.
• Mahi Mahara: Retains previous settings (color, brightness, timing) after a power outage, eliminating the need for re-setup.

Whakaatu 4.1: Taipitopito view of the full spectrum LED array, optimized for plant growth.

5. Aratohu Tatūnga

Follow these steps to install your AQQA LED Aquarium Light:

1. Āpitihia te Topenga: Secure the aluminum alloy clip to the edge of your aquarium. Ensure the clip is firmly tightened using the screws provided, suitable for tank thickness up to 0.9 inches.
2. Whakanohoia te Marama: Insert the flexible gooseneck tube into the clip. Adjust the gooseneck to position the light fixture directly over your aquarium. The 360° flexibility allows for precise placement.
3. Hono Hono: Plug the light's power cord into the controller, and then plug the controller's power adapter into a suitable electrical outlet.

Figure 5.1: Illustration of the flexible clip-on installation method.

6. Aratau Mahi

Your AQQA LED Aquarium Light offers two primary operating modes: DIY Mode for custom settings and 24/7 Default Mode for automated light cycles.

6.1. Aratau Mahi-ā-ringa

The DIY mode allows you to manually set the timer, color, and brightness. Use the inline controller to navigate these settings.

• Tautuhinga Matama: Press the 'TIMER' button to cycle through 6H, 10H, or 12H lighting durations.
• Whakaritenga Tae: Press the 'C/M' button to change between 7 individual colors (Red, Green, Blue, Orange, Yellow, Cyan Blue, Purple), full spectrum white, or an auto color cycle. Press and hold for 3 seconds to exit color mode.
• Mana Tirohanga: Press the '%' button to adjust brightness levels (10%, 25%, 50%, 75%, 100%). Note: Brightness cannot be adjusted in 24/7 mode.

Figure 6.1: The inline controller for DIY mode settings.

Figure 6.2: Visual representation of the 8 available lighting modes.

6.2. Aratau Taunoa 24/7

This mode simulates a natural 24-hour light cycle, automatically adjusting light intensity and color throughout the day. The default cycle starts at 6 AM and ends at 10:58 PM.

• Whakahohenga: Press the '24/7' button on the controller to activate this mode.
• Light Cycle: The light will gradually transition from warm orange (sunrise) to bright full-spectrum (noon), then to a dimmer blue light (moonlight) before turning off.
• Whakatikatika Wā: The overall default time period can be postponed or advanced to better suit your schedule.

Figure 6.3: The 24/7 default mode light cycle simulation.

7. Tiaki

Regular maintenance ensures the longevity and optimal performance of your aquarium light:

• Te horoi: Horoia te rama i ia wā ki te wai ngohengohe,amp cloth to remove water spots, dust, and algae buildup. Ensure the light is unplugged before cleaning.
• Tirotiro taura: Regularly check the power cord and controller for any signs of damage, fraying, or kinks.
• Mata LED: Avoid scratching the LED surface. Do not use abrasive cleaners.

8. Te Raru

If you encounter issues with your AQQA LED Aquarium Light, refer to the following common problems and solutions:

9. Whakatakotoranga Hangarau

10. Pūtāhui me te Tautoko

AQQA products are manufactured to high-quality standards. For warranty information, technical support, or any inquiries regarding your AQQA LED Aquarium Light, please refer to the contact information provided with your purchase or visit the official AQQA brand store on Amazon.

Tautoko Aipurangi: Visit the AQQA Store on Amazon