DEERC Spider RC Car Transform Robot (1:18 Scale) User Manual

1. Kupu Whakataki

Thank you for choosing the DEERC Spider RC Car Transform Robot. This remote-controlled toy offers dynamic transformation between a high-speed car and an agile robot, featuring 2.4GHz control, 360-degree rotation, and one-key transformation. This manual provides essential information for safe operation, setup, and maintenance to ensure optimal performance and enjoyment.

Image 1.1: The DEERC Spider RC Car Transform Robot in its car and robot configurations, alongside its remote control unit.

2. Nga korero haumaru

Please read and understand all safety warnings before operating the product. Failure to follow these instructions may result in injury or damage to the product.

• Mo te whakamahi o waho anake. Do not ingest any parts of the toy or battery.
• Ka tūtohuhia tenei hua mo nga tau 8 me te ake. Ka tohutohuhia te tirotiro pakeke mo nga kaiwhakamahi rangatahi.
• Keep fingers, hair, and loose clothing away from moving parts, especially during transformation.
• Do not operate the toy near water or in wet conditions to prevent electrical damage.
• Use only the provided charging cable and battery. Do not attempt to charge non-rechargeable batteries.
• If the battery becomes hot during charging or use, discontinue use immediately.
• Avoid operating the toy in crowded areas or near obstacles that could cause collisions.
• Whakaorangia te hua ki te waahi makariri, maroke ki te kore e whakamahia.

3. Ihirangi mokete

Manatokohia kei roto katoa nga mea kei roto i te kete i mua i te tiimata i te tatūnga.

• DEERC Spider RC Car Transform Robot
• Mana Mamao
• Rechargeable Lithium Ion Battery (for the toy)
• Tauira Whakatau USB
• Kaihurihuri
• Pukapuka ā-ringa mō te hua (tēnei tuhinga)

Image 3.1: All components included in the DEERC Spider RC Car Transform Robot package.

4. Tatūnga

4.1. Charging the Toy Battery

1. Locate the rechargeable Lithium Ion battery and the USB charging cable.
2. Honoa te pākahiko ki te taura utu USB.
3. Monohia te pito USB o te taura ki roto i tētahi urutau hiko USB paerewa (kāore i te whakaurua) ki tētahi tauranga USB rorohiko rānei.
4. The indicator light on the USB cable will illuminate during charging and turn off or change color when fully charged.
5. E 60-90 meneti pea te roa o te utu. Kaua e nui rawa te utu.

4.2. Installing the Toy Battery

1. Using the provided screwdriver, open the battery compartment on the underside of the toy.
2. Carefully insert the fully charged battery into the compartment, ensuring correct polarity.
3. Katia te wahanga pākahiko ka mau ki te huri.

4.3. Tāuta Pūhiko Mana Mamao

1. Whakatuwherahia te wahanga pākahiko kei muri o te mana mamao.
2. Insert two 1.5V 'AA' batteries (not included), observing the correct polarity (+/-).
3. Katia kia mau te wahanga pākahiko.

4.4. Whakahoahoa i te Mana Mamao

1. Ensure the toy's battery is installed and the toy is powered off.
2. Whakakāhia te mana mamao. Ka mura te rama tohu i te mana mamao.
3. Turn on the toy. The toy's indicator light will also flash.
4. Within a few seconds, both indicator lights should become solid, indicating successful pairing. If pairing fails, turn off both devices and repeat the process.

5. Nga Tohutohu Whakahaere

Familiarize yourself with the remote control functions before operating the toy.

5.1. Nekehanga Taketake

• Whakamua: Panahia te rakau maui ki mua.
• Whakamuri: Tōia te rakau maui ki muri.
• Huri Mauī: Push the right joystick left.
• Huri Matau: Push the right joystick right.

5.2. One-Key Transformation

Press the dedicated transformation button on the remote control to switch between car mode and robot mode. The toy will automatically perform the transformation sequence.

Image 5.1: Visual representation of the one-key transformation feature.

5.3. 360° Rotation

In either car or robot mode, use specific joystick combinations (refer to remote control diagram if available) or a dedicated button to initiate a 360-degree spin. This feature allows for dynamic maneuvers.

Image 5.2: The robot performing a 360-degree rotation.

5.4. Aratau Aunoa

Press the 'Auto Mode' button on the remote control to activate an automatic demonstration sequence. The toy will showcase its transformation and movement capabilities independently.

5.5. Rama Rama

The toy features integrated LED lights that illuminate during operation and transformation, enhancing the visual experience.

6. Tiaki

6.1. Te horoi

• Wipe the toy with a soft, dry cloth to remove dust and dirt.
• Do not use water or chemical cleaners, as this can damage electronic components.

6.2. Rokiroki

• When not in use for extended periods, remove batteries from both the toy and the remote control.
• Store the toy and remote in a cool, dry place, away from direct sunlight and extreme temperatures.

6.3. Material Durability

The toy is constructed from durable ABS plastic and features robust rubber tires designed for longevity and smooth transformation.

Image 6.1: Details of the toy's durable ABS material and rubber wheels.

7. Te Raru

If you encounter issues with your DEERC Spider RC Car Transform Robot, refer to the following common problems and solutions:

8. Whakatakotoranga

• Rahi Hua: 9.05 x 3.74 x 2.36 inihi
• Taumaha Tūemi: 14.6 hekere
• ASIN: B0D9M3W6GL
• Tau Manakohia e te Kaihanga: 8 tau ki runga ake
• Pūhiko: 1 Lithium Ion battery (included) for toy, 2 AA batteries (not included) for remote.
• Auautanga Mana: 2.4GHz
• Kaihanga: DEERC

9. Pūtāhui me te Tautoko

DEERC products are designed for quality and performance. For any questions, technical assistance, or warranty claims, please contact DEERC customer support. Refer to the product packaging or the official DEERC webpae mo nga korero whakapā o naianei.

Tena koa pupurihia to tohu hoko mo nga kaupapa whakamana.