Kupu Whakataki
This manual provides detailed instructions for the installation, operation, and maintenance of your Maxxima 2-inch Rotatable Ultra-Thin Recessed LED Floating Gimbal Downlight. This energy-efficient LED downlight offers versatile lighting solutions with its rotatable design and selectable color temperature feature. Please read these instructions thoroughly before installation and retain them for future reference.
Āhuatanga matua:
- 5 CCT Selectable: Choose from 2700K (Soft White), 3000K (Warm White), 3500K (Bright White), 4000K (Neutral White), or 5000K (Daylight) using the switch on the junction box.
- Rotatable Gimbal: Features 360° rotation and 90° tilt for precise light direction.
- Ka taea te atarua: Compatible with most standard LED dimmers, offering a dimmable range of 10-100%.
- Canless Design: No separate housing required; installs directly into the ceiling with spring clips.
- CRI teitei: 90 CRI for accurate color rendering.
- IC Whakatauria: He pai mo te whakapiri tika ki te whakamatao.
- Damp Whakatauria: Ideal for various indoor environments including bathrooms and kitchens.
Nga korero haumaru
WHAKATŪPATO: Te Morearea o te Ahi, te Ru Hiko ranei.
- Ko te whakaurunga me mahi e tetahi tohunga hiko i runga i nga tikanga hiko o te motu me te rohe.
- Whakawetohia te hiko i te whati ara iahiko i mua i te tāutanga, i te mahi tiaki rānei.
- Me whakarite kia mau nga hononga katoa me te whakamaarama tika.
- Kaua e whakarerekētia, e whakapōrearea rānei te taputapu.
- This fixture is designed for 120VAC circuits only.
- Do not use with dimmers not specifically designed for LED lighting.
Ihirangi mokete
- 1x Maxxima 2-inch Rotatable Ultra-Thin Recessed LED Floating Gimbal Downlight (Model MRL-S20555B)
- 1x Remote Junction Box with CCT Select Switch
- Foam Gasket (pre-installed for air-tight application)
Image: The Maxxima 2-inch Rotatable Ultra-Thin Recessed LED Floating Gimbal Downlight, showing the main light fixture with spring clips and the connected remote junction box.
Whakatakotoranga
| Tau tauira | MRL-S20555B |
| Whakamahi Hiko | 5 Watts (e rite ana ki te 40W te kanapa) |
| Rerewharewha | 360 Lumens |
| Whakauru Voltage | 120VAC |
| Paemahana Tae (CCT) | Kōwhiringa: 2700K, 3000K, 3500K, 4000K, 5000K |
| Taupū Whakaatu Tae (CRI) | 90 |
| Te rangirua | 10% - 100% (with compatible LED dimmers) |
| Koki Kurupae | 38° |
| Koki Hurihuri | 360° |
| Koki Honga | 90° |
| Rahi Whakanoho | 1.3” Deep x 3.55” Diameter (0.7” trim width) |
| Ahu Pouaka Whakapiri | 4.7” W x 1.8” L X 2” H |
| Wire Length (Fixture to J-Box) | 16.9” |
| Rauemi | Cast Aluminum body, Polycarbonate lens |
| Tiwhikete | Kua Rārangihia a ETL, Kua Whakatauria a IC, Damp Whakatauria |
Tatūnga me te Tāuta
- Whakapaia te Rohe Tāuta:
Turn off power at the circuit breaker before beginning installation. Ensure the ceiling area is clear of obstructions and suitable for recessed lighting.
- Tapahia te whakatuwheratanga o te tuanui:
Using a hole saw, cut a 2-inch diameter hole in the ceiling drywall at the desired location. Ensure the hole is clean and smooth.
Whakaahua: He runga-iho view of the recessed light, highlighting the spring clips used for installation.
- Connect Wiring to Junction Box:
Open the remote junction box. Connect the household electrical wires (live, neutral, ground) to the corresponding wires inside the junction box using appropriate wire connectors. Ensure all connections are secure.
Image: The back of the recessed light, showing the wire connecting to the junction box and the spring clips.
- Tīpako Pawera Tae (CCT):
Before closing the junction box and installing it into the ceiling, use the CCT selector switch located on the side of the junction box to choose your desired color temperature (2700K, 3000K, 3500K, 4000K, or 5000K).
Image: A close-up of the remote junction box, clearly showing the 5-position CCT selector switch for choosing light color.
- Place Junction Box:
Once wiring is complete and CCT is selected, close the junction box and place it inside the ceiling cavity, ensuring it rests securely on a ceiling beam or is otherwise supported.
- Install the Downlight:
Push the spring clips on the downlight upwards and insert the fixture into the ceiling opening. Release the clips to secure the downlight flush against the ceiling. The foam gasket will ensure an air-tight seal.
Image: An installed Maxxima recessed light in a ceiling, demonstrating the adjustable gimbal feature.
- Whakaora i te Mana:
Kia oti te tāutanga, whakahokia te hiko i te kaiwawao ara iahiko, ka whakamātauria te rama.
Nga Tohutohu Whakahaere
- Hiko Whakaka/Weto: Control the light using a standard wall switch or dimmer switch connected to the circuit.
- Whakatikatika i te Pāmahana Tae (CCT): The CCT is set during installation via the switch on the junction box. To change the CCT, power must be turned off at the breaker, the fixture removed, and the switch on the junction box adjusted.
- Te auri: If connected to a compatible LED dimmer, adjust the dimmer switch to achieve the desired brightness level (10-100%).
- Whakaritea Aronga Maama: The gimbal mechanism allows for 360° rotation and 90° tilt. Gently push or pull the inner light module to rotate it or tilt it to direct the light as needed.
Image: A Maxxima recessed light demonstrating its full range of rotation and tilt, allowing for flexible light direction.
Te tiaki
- Te horoi: Me mohio kua weto te hiko i mua i te horoi. Horoia te taputapu ki te ngohengohe, maroke, paku ranei damp kakahu. Kaua e whakamahi i nga kai horoi me nga whakarewa.
- Karekau he waahanga e taea ana e te Kaiwhakamahi: The LED light source is integrated and not replaceable. Do not attempt to open or repair the fixture.
Raparongoā
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Kaore e marama te rama. | Kāore he hiko, he koretake te waea, he hapa te pana. | Tirohia te pūwehe ara iahiko. Me whakaū kei te mau tonu ngā hononga waea katoa. Whakamātauria te pana. |
| Ka kemo, ka memeha rānei te mārama i te āhua tika. | He ārai whakamahana kore hototahi, he waea koretake. | Ensure dimmer is compatible with LED fixtures. Check wiring connections. |
| Te pāmahana tae hē. | I hē te whakatakotoranga o te whakakā CCT. | Turn off power, remove fixture, and adjust the CCT switch on the junction box. |
Pūtāhui me te Tautoko
This Maxxima product is backed by a 3-tau pūtāhui mai i te ra o te hokonga. Ka kapi tenei raihana i nga hapa o nga rawa me nga mahi i raro i te whakamahinga noa.
For technical support, warranty claims, or further assistance, please visit the official Maxxima webpaetukutuku, whakapā atu rānei ki tā rātou tari ratonga kiritaki. Ka kitea e koe ētahi atu kōrero me ngā hua i te Maxxima Store on Amazon.
