KATOOL AM120SD 12000lbs Two-Post Car Lift Instruction Manual

1. Kupu Whakataki me Nekeview

This manual provides comprehensive instructions for the safe and efficient operation, installation, and maintenance of your KATOOL AM120SD 12000lbs Two-Post Car Lift. Designed for professional automotive environments, this heavy-duty lift features a 4.0HP motor and a single-point locking system for enhanced safety and productivity. Please read this manual thoroughly before installation or operation to ensure proper usage and to prevent injury or damage.

2. Nga korero haumaru

Always prioritize safety when operating heavy machinery. Failure to follow safety instructions can result in serious injury or death. Ensure all personnel are trained and aware of potential hazards.

• Pānuihia te pukapuka: Kia mohio ki nga tikanga whakahaere katoa me nga whakatupato haumaru i mua i te whakamahi.
• Kaimahi Tohu: Only trained and authorized individuals should operate this equipment.
• Tāuta Tika: Me whakarite kia tāuta te ararewa ki runga i tētahi turanga raima papatahi, totoka, ka taea te tautoko i te taumaha me te kawenga mōrahi o te ararewa.
• Raukaha Uta: Never exceed the maximum rated lifting capacity of 12,000 lbs.
• Turanga Waka: Center the vehicle properly on the lift arms and ensure all four lift pads are securely positioned under the vehicle's designated lifting points.
• Ngā Tikanga Maukati: Always engage the safety locking mechanisms before working under the vehicle.
• Maama te Rohe: Keep the area around the lift clear of obstructions and unauthorized personnel during operation.
• Tirotiro auau: Perform daily and weekly checks as outlined in the Maintenance section.

3. Nga Hua o te Hua

• Superior 12,000-lb Heavy-Duty Lifting Capacity: Built for demanding professional environments, this 2-post lift offers an exceptional 12,000-lb lifting capacity, making it a robust solution for auto repair shops, fleet maintenance centers, and dealerships.
• High-Efficiency 4.0HP Electric Motor System: Equipped with a powerful 4.0HP motor, this lift provides faster rise times, smoother operation, and consistent performance under heavy loads, ensuring quick and efficient lifting.
• Advanced Single-Point Locking System: The innovative Single Point Lock mechanism enhances safety by securely locking the lift at various height positions, providing peace of mind during extended operations.
• Maximum Working Height of 70.87 Inches: With an industry-leading maximum lifting height of 70.87 inches, this model offers outstanding overhead clearance for technicians to perform repairs, maintenance, and inspections with ease.
• Ultra-Low 4.25-Inch Minimum Height: Featuring an ultra-low minimum lifting height of just 4.25 inches, this lift easily accommodates vehicles with extremely low ground clearance, including sports cars and lowered sedans, without requiring additional adapters or ramps.

4. Whakatakotoranga

5. Tatūnga me te Tāuta

Proper installation is crucial for the safety and functionality of your KATOOL AM120SD lift. It is highly recommended that installation be performed by qualified professionals. Refer to the detailed installation video below for visual guidance.

Nga Hipanga Whakamutungaview:

1. Te Wetewete me te Tirotiro: Carefully unbox all components. Check for any damage or missing parts.
2. Whakaritenga Pae: Ensure the installation site has a level concrete floor of sufficient thickness and strength to support the lift and its maximum load.
3. Column Placement: Position the two main columns according to the provided dimensions, ensuring proper spacing and alignment.
4. Puranga: Securely anchor the columns to the concrete floor using the provided expansion bolts.
5. Hydraulic System Setup: Connect the hydraulic hoses and power unit. Fill the reservoir with the recommended hydraulic oil.
6. Ararere taura: Route the equalization cables and safety tripwires through the columns and pulleys as instructed.
7. Tāuta ringa: Install the lifting arms, ensuring the correct two-stage and three-stage arms are placed at the front and rear respectively.
8. Hononga Hiko: Connect the 220V power supply to the motor, ensuring proper grounding.
9. Te Whakamātautau Tuatahi: Perform a test run without a vehicle to check for smooth operation, proper synchronization, and engagement of safety locks.

6. Nga Tohutohu Whakahaere

Follow these steps for safe and effective operation of your KATOOL AM120SD Two-Post Car Lift.

Lifting a Vehicle:

1. Waka Tūnga: Drive the vehicle onto the lift, ensuring it is centered between the columns.
2. Whakaritea Nga Pu: Swing the lift arms into position under the vehicle's designated lifting points. Ensure the two-stage arms are at the rear and three-stage arms are at the front.
3. Adjust Lift Pads: Adjust the height of the lift pads to make firm contact with the vehicle's frame. Use height adjustment pads as needed for vehicles with varying chassis heights.
4. Initial Lift: Press the 'UP' button on the power unit to slowly raise the vehicle a few inches off the ground.
5. Tirohia te pumau: Carefully check that the vehicle is stable and securely supported on all four pads.
6. Full Lift: Continue pressing the 'UP' button to raise the vehicle to the desired working height.
7. Whakaūtia ngā Maukati Haumaru: Once at the desired height, lower the lift slightly until the safety locks engage with an audible 'click'. This transfers the load from the hydraulic system to the mechanical locks.

Lowering a Vehicle:

1. Whakaara ake mārire: Press the 'UP' button briefly to lift the vehicle off the safety locks.
2. Wetekina ngā Maukati: Pull the single-point lock release handle to disengage the safety locks.
3. Waka Raro: Press the 'DOWN' lever on the power unit to slowly lower the vehicle. Ensure the area below is clear.
4. Retract Arms: Once the vehicle is fully on the ground, swing the lift arms clear before driving the vehicle off the lift.

7. Maintenance and Care Instructions

Regular maintenance is essential to ensure the longevity and safe operation of your KATOOL AM120SD lift.

Whakamahi ia rā:

• Safety Device Check: Check if the safety device can lock into place and if the linkage is functioning properly. Repair or replace any potential hazards promptly.

Arotakenga ā-Wiki:

• Steel Wire Inspection: Inspect the steel wire for looseness or broken strands.
• Sliding Blocks: Observe the sliding blocks on the internal platform of the columns and apply grease as needed. If wear on one side exceeds 20%, it will no longer be securely gripped by the columns and should be replaced in a timely manner.

Bi-Weekly Check:

• Hydraulic Hose Connections: Inspect all hydraulic hose connections for leaks or ruptures, and repair or replace them as necessary.

Tiaki Marama:

• Taki Tiaki: Check if all screws and nuts are tightened properly. After a test run, retighten all screws and nuts.

8. Te Raru

This section provides solutions to common issues you might encounter with your KATOOL AM120SD lift.

9. He aha kei roto i te Pouaka

The KATOOL AM120SD 12000lbs Two-Post Car Lift package includes the following components:

• Two-Post Car Lift (Main Assembly)
• Power Unit (4.0HP, 220V)
• Nga ngongo Hydraulic
• Lifting Arms (Two-stage and Three-stage)
• Lift Pads and Height Adapters
• Equalization Cables and Pulleys
• Safety Locking Mechanisms and Release Handle
• Mounting Hardware (Expansion Bolts, Nuts, Washers)
• Pukapuka Tohutohu

10. Pūtāhui me te Tautoko

KATOOL is committed to providing high-quality products and customer satisfaction. For any questions, technical assistance, or warranty claims, please contact KATOOL Customer Support.

• Tautoko Kiritaki: For assistance, please refer to the contact information provided with your purchase or visit the official KATOOL webpae.
• Mahere Tiaki: Extended protection plans may be available for purchase to cover your investment beyond the standard warranty.
• Whakahoki: This product is eligible for 30-day easy returns. Please refer to the seller's return policy for details.