Pukapuka Kaiwhakamahi mō ngā Tohutohu Whakakapinga Adonit SE 2

Kupu Whakataki

This manual provides essential instructions for the proper installation and maintenance of your adonit SE 2 Replacement Tips. These tips are designed to restore the precision and functionality of your Adonit SE 2 stylus, ensuring a smooth and responsive writing or drawing experience.

Tatūnga

Before replacing the tip, ensure your Adonit SE 2 stylus is clean and free of debris. It is recommended to perform this procedure on a flat, stable surface to prevent loss of the small components.

Operating: Tip Replacement

Replacing the tip on your Adonit SE 2 stylus is a straightforward process. Follow these steps carefully:

1. To remove the old tip, gently grasp the existing tip and twist it takakaraka until it detaches from the stylus. Apply minimal force to avoid damaging the stylus.
2. Take one of the new adonit SE 2 Replacement Tips from the package.
3. Align the base of the new tip with the opening on the stylus. Gently push the tip into place while twisting it karaka. Continue twisting until the tip is securely fastened and no longer rotates freely. Do not overtighten.
4. Test the stylus to ensure the new tip is functioning correctly.

Te tiaki

To ensure the longevity and optimal performance of your adonit SE 2 Replacement Tips:

• Store unused tips in their original packaging or a clean, dry container to protect them from dust and damage.
• Avoid dropping the stylus, especially on hard surfaces, as this can damage the tip or the stylus mechanism.
• If the tip becomes dirty, gently wipe it with a soft, lint-free cloth. Do not use abrasive cleaners or solvents.
• Replace tips as needed when you notice a decrease in responsiveness or visible wear.

Raparongoā

If you encounter issues after replacing your adonit SE 2 Replacement Tip, consider the following:

• Tip is Loose: Ensure the tip is twisted clockwise until it is fully secure. It should not wobble or rotate freely.
• Stylus Kaore i te whakautu: Verify that the tip is correctly installed. If the issue persists, try removing and re-installing the tip. Ensure your Adonit SE 2 stylus itself is charged and properly connected to your device.
• Tip Appears Damaged: If the tip is visibly bent, cracked, or worn, replace it with a new one. Damaged tips can impair performance and potentially scratch your device screen.

Whakatakotoranga

Nga korero Whakaputanga

Warranty information for adonit products is typically provided with your purchase or can be found on the official Adonit website. Please refer to the documentation included with your Adonit SE 2 stylus or visit adonit.com for detailed warranty terms and conditions. A 30-day return policy may apply for purchases through authorized retailers.

Tautoko Kiritaki

For technical assistance, product inquiries, or further support regarding your adonit SE 2 Replacement Tips, please contact Adonit customer service. You can typically find contact information on the official Adonit webpae (adonit.com) or through your point of purchase.