1. Kupu Whakataki
Thank you for choosing the ADT HZB-45YY Commercial Ice Maker. This manual provides essential information for the safe operation, installation, maintenance, and troubleshooting of your new ice machine. Please read this manual thoroughly before operating the appliance and retain it for future reference.
Whakaahuatanga Whakaahua: He mua view of the ADT HZB-45YY Commercial Ice Maker, featuring a stainless steel finish and a black top. An overlay highlights the unique crescent-shaped ice cubes produced by the machine.
2. Nga korero haumaru
To prevent injury to users or damage to the appliance, observe all safety precautions. This appliance is intended for commercial use. Always ensure proper grounding and ventilation.
- Kaua e whakahaeretia te miihini me te taura hiko kua pakaru, te mono ranei.
- Me whakarite kia whakanohoia te miihini ki runga i te mata o te papa.
- Puritia nga tuwhera o te hau ki nga arai.
- Kaua e rokirokia nga matū pahū penei i te kēne aerosol me te aporo muramura ki roto i tenei taputapu.
- Momotuhia mai i te hiko i mua i te horoi, te mahi ranei.
3. Ihirangi mokete
Manatokona kei roto katoa nga taonga kei roto i te kete:
- ADT HZB-45YY Commercial Ice Maker Unit
- Te hukapapa kikorangi
- In-Line Water Hose
- Haurangi Hauwai
- Gallon-Bottled Water Hose
- Pukapuka Tohutohu (tenei tuhinga)
Whakaahuatanga Whakaahua: This image displays the ADT HZB-45YY ice maker with its approximate dimensions (17.6 inches width, 15.7 inches depth, 31.4 inches height). Below the unit, the included accessories are shown: an ice scoop, an in-line water hose, a drain hose, and a hose for gallon-bottled water connection.
4. Hua Neke Atuview me nga ahuatanga
The ADT HZB-45YY is a high-efficiency commercial ice maker designed for reliable ice production. Key features include:
- Crescent-Shaped Ice Cubes: Unique design for slow-melting ice, ideal for beverages.
- Teitei o te Pūngao ia Rā: Ka whakaputa ake ki te 121 lbs (55 kg) te hukapapa ia ra.
- Te Hanga Hukapapa Tere: Each ice-making cycle takes approximately 13-20 minutes.
- Efficient Evaporator: Features a 4x8 two-sided evaporator for consistent performance.
- Hanga Roa: Sleek stainless steel design, rust-resistant and built for longevity.
- Paewhiri Mana Mamati: Intuitive LCD panel for easy operation and settings adjustment.
- Mahi Whakapai-whaiaro: Simplifies maintenance.
- Time Reservation: Allows setting ice production time in advance.
Whakaahuatanga Whakaahua: A banner highlighting eight core technologies of the ADT ice maker, represented by icons and text: Stainless Steel Body, Powerful Compressor, Energy Saving, Blue Light, Digital Control, Foamed Insulation, Self Cleaning, and Time Reservation.
Whakaahuatanga Whakaahua: This image illustrates the different thicknesses of crescent-shaped ice cubes the machine can produce, along with their approximate production times: Thin Ice Cube (5-9 minutes), Medium Ice Cube (9-15 minutes), and Thick Ice Cube (15-25 minutes).
5. Tatūnga me te Tāuta
He mea nui te whakaurunga tika mo te mahi tino pai me te haumaru.
5.1 Te Wetewete
- Me ata tango te hanga tio mai i tana putunga.
- Remove all packing materials, tape, and protective film.
- Inspect the unit for any shipping damage. Contact your retailer immediately if damage is found.
5.2 Whakanoho
- Whakatakotoria te mīhini hukapapa ki runga i tētahi mata mārō, papatahi ka taea te tautoko i tōna taumaha ina kī ana i te hukapapa me te wai.
- Ensure adequate ventilation around the unit. Maintain at least 5 inches (12.7 cm) of space from walls and other appliances.
- A ape i te ra tika, i nga puna wera ranei.
- Me noho te pāmahana o te taiao i waenga i te 50°F (10°C) me te 90°F (32°C).
5.3 Hononga Wai
The ADT HZB-45YY offers two methods for water supply:
- In-Line Water Supply: Connect the provided in-line hose to a potable water source with appropriate pressure. Ensure all connections are secure to prevent leaks.
- Gallon-Bottled Water Supply: Use the provided hose to connect to a standard gallon-bottled water dispenser.
Ensure the drain hose is properly connected and directed to a suitable drain to prevent water overflow.
Whakaahuatanga Whakaahua: This image demonstrates the two water input options for the ice maker. On the right, an 'In-line' connection shows a hose leading to a faucet. On the left, a 'Gallon-bottled water' connection shows a hose leading to a large water bottle.
Whakaahuatanga Whakaahua: He taipitopito view of the ice maker's back panel, highlighting the connection points for easy installation. Labels indicate the 'Water outlet', 'Power line', 'In-line' water intake, and 'Gallon-bottled water' intake.
5.4 Hononga Hiko
- Me whakarite kia rite te putanga hiko ki te voltage requirements of the ice maker (115 Volts).
- Monohia te taura hiko ki roto i te putanga hiko. Kaua e whakamahi i nga taura toronga me nga taapiri.
6. Nga Tohutohu Whakahaere
Familiarize yourself with the control panel and basic operations.
6.1 Paewhiri Mana Ki rungaview
Whakaahuatanga Whakaahua: A detailed close-up of the ice maker's LCD control panel. The panel displays temperature and ice-making status. Buttons are labeled with their functions: 'LIGHT' (turns on blue light), 'TIMER' (for reservation time setting), 'CLEAN' (press for 5 seconds for self-cleaning), 'ON/OFF' (power button), and '+/-' (adjusts ice making process and time).
- KAMAMA: Activates the internal blue light.
- TAIMA: Press to enter the reservation time setting for delayed ice production.
- ma: Press and hold for 5 seconds to initiate the self-cleaning function.
- KIA/WATA: Ka whakakaha, ka weto ranei te waeine.
- +/-: Used to adjust ice making duration or set timer values.
6.2 Whakaoho Tuatahi
- I muri i te hono i te wai me te hiko, pehia te ON/OFF te paatene hei timata i te miihini.
- The machine will begin its first ice-making cycle. The first few batches of ice may be smaller or irregular; discard them.
6.3 Hanga Hukapapa
- The machine produces up to 64 pieces of ice per cycle.
- Cycle duration is typically 13-20 minutes, depending on ambient temperature and water temperature.
- Whakamahia te +/- buttons to adjust the ice-making time, which influences the thickness of the ice cubes. Longer times result in thicker ice.
Whakaahuatanga Whakaahua: He tata view of the ADT ice maker's front panel, highlighting its performance metrics. Text overlays indicate a '120lbs Daily Capacity' and '64 pcs ice per cycle, 13-20 mins one time'.
6.4 Ice Making Reservation
To set a delayed start time for ice production:
- With the machine in standby mode, press the WAIATA pātene.
- Whakamahia te +/- buttons to set the desired delay time (in hours).
- Perehi WAIATA again to confirm. The machine will start automatically after the set time.
Whakaahuatanga Whakaahua: The ADT ice maker is shown in a modern room setting, positioned near a window and a plant. Text on the image highlights the 'ICE MAKING RESERVATION' feature, explaining that users can 'Set the ice making time in advance to save waiting time'.
7. Tiaki
Regular cleaning and maintenance ensure the longevity and hygiene of your ice maker.
7.1 Mahi Whakapai Whaiaro
The machine is equipped with a self-cleaning feature:
- Ensure the machine is connected to a water supply and drain.
- Patohia me te pupuri i te MAA pātene mo te 5 hēkona.
- The machine will automatically run a cleaning cycle.
- Once complete, drain any remaining water.
7.2 Te horoi a-ringa
- Waho: Wipe the exterior with a soft cloth and mild detergent. Do not use abrasive cleaners.
- roto: For thorough cleaning, disconnect power. Remove any remaining ice. Clean the ice storage bin and water reservoir with a solution of water and white vinegar or a food-grade ice maker cleaner. Rinse thoroughly with clean water.
- Whakaeto: Periodically inspect the evaporator plates for mineral buildup. Clean gently with a soft brush if necessary.
- Tātari hau: The air filter (if present, typically on the front or side grille) should be cleaned monthly. Remove and wash with warm, soapy water, then dry completely before reinstalling.
Whakaahuatanga Whakaahua: He tata view of the ice maker's internal evaporator plates, which are responsible for forming the ice cubes.
8. Te Raru
Tirohia tenei waahanga mo nga take noa me o raatau otinga.
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Karekau te kaihanga tio e whakaputa tio. | No water supply; Water inlet blocked; Ambient temperature too high; Compressor issue. | Check water connection and supply; Clean water inlet filter; Ensure proper ventilation; Contact support if compressor suspected. |
| Ice cubes are too small or thin. | Ice making time too short; Water temperature too high. | Increase ice making time using the +/- buttons; Use colder water if possible. |
| He haruru te miihini. | Unit not level; Fan obstruction; Normal operation sounds. | Ensure unit is level; Check for obstructions around fan; Some operational noise is normal. |
| Te rerenga wai. | Nga hononga wai wetekina; Ko te ngongo ngongo kua purua. | Tighten all water inlet and drain connections; Clear any blockages in the drain hose. |
| Self-cleaning not working. | Button not held long enough; Water supply issue. | Ensure the CLEAN button is held for 5 seconds; Verify water supply is connected. |
If the problem persists after attempting these solutions, please contact ADT customer support.
9. Whakatakotoranga
| Āhuahira | Taipitopito |
|---|---|
| Waitohu | ADT |
| Ingoa Tauira | HZB-45YY |
| Hanga Tio ia ra | Tae atu ki te 121 lbs (55 kg) |
| Hanga Tio Tio | Crecent |
| Ice Cycle Time | 13-20 meneti |
| Evaporator Type | 4x8 Two-Sided |
| Voltage | 115 Volts |
| Te Raukaha Wai | 1.7 Rita (tata) |
| Rahi Hua (D x W x H) | 15.7" x 17.6" x 31.4" (approximate, refer to dimension image for visual) |
10. Pūtāhui me te Tautoko
ADT provides a one-year warranty for this product from the date of purchase. This warranty covers manufacturing defects under normal use. Additionally, a 30-day return policy is offered.
For warranty claims, technical support, or any inquiries, please contact ADT customer service through the retailer where the product was purchased or visit the official ADT webpae.
