Thermalright Aqua Elite 240 ARGB CPU Water Cooler User Manual

1. Kupu Whakataki

The Thermalright Aqua Elite 240 ARGB CPU Water Cooler is an all-in-one liquid cooling solution designed to provide efficient thermal management for your CPU. It features a 240mm radiator, dual PWM fans, and addressable RGB lighting for customizable aesthetics. This manual provides detailed instructions for installation, operation, and maintenance to ensure optimal performance and longevity of your cooler.

Whakaahua: Ka mutuview of the Thermalright Aqua Elite 240 ARGB High Performance CPU Water Cooler.

2. Nga korero haumaru

Please read and understand all safety instructions before installing or operating this product. Failure to do so may result in damage to the product, other components, or personal injury.

• Ensure your system is powered off and unplugged from the wall outlet before installation.
• Kia tupato ki te hapai i nga waahanga kia kore ai e pakaru.
• Kaua e whakatuwheratia nga waahanga hiri o te whakamatao wai.
• Kaua e taea e nga tamariki.
• Use only the provided accessories and mounting hardware.

3. Ihirangi mokete

Manatokohia kei roto i to kete nga waahanga katoa kua whakarārangihia i raro nei:

• Thermalright Aqua Elite 240 ARGB CPU Water Cooler (Radiator with attached pump/waterblock and fans)
• Mounting Brackets for Intel (LGA1851/1700/1150/1151/1155/1156/1200/2011/2066)
• Mounting Brackets for AMD (AM4/AM5)
• Backplate for Intel LGA115X/1200/1700
• Mounting Screws and Standoffs
• Taputapu Ngawha
• Taura Wehewehe Pā PWM
• ARGB 3-pin Connector Cables
• Pukapuka Kaiwhakamahi

4. Aratohu Whakauru

This section details the installation process for your Thermalright Aqua Elite 240 ARGB CPU Water Cooler. Please follow the steps carefully for your specific CPU socket type.

4.1. Whakaritenga Whanui

1. Me mohio kua wetohia to rorohiko me te wetewete.
2. Open your PC case and locate the CPU socket area on your motherboard.
3. Tangohia te pouaka whakamatao CPU o nāianei. Horoia te mata o te CPU kia tino horoia hei tango i te whakapiri wera tawhito.

4.2. AMD AM4/AM5 Tāutatanga

1. Remove the protective sticker from the coldplate of the water block.
2. Align the arrow on the AMD bracket with the arrow on the water block and rotate to install the AMD bracket onto the water block.
3. Apply thermal compound to the CPU Integrated Heat Spreader (IHS).
4. Place the water block onto the CPU. Use the buckles on the AMD bracket to secure the water block to the motherboard's existing retention module.
5. Tighten both screws on the bracket with a screwdriver to apply mounting pressure evenly.

Image: Close-up of the water block, showing the copper coldplate and ARGB lighting interface.

4.3. Intel LGA1700 Tāuta

1. Adjust the mounting hole position on the Intel backplate to "1700".
2. Install the backplate from the backside of the motherboard, ensuring the screws pass through the mounting holes.
3. Install the 1700 standoffs onto the backplate screws from the front side of the motherboard.
4. Remove the protective sticker from the coldplate of the water block.
5. Align the arrow on the Intel bracket to the water block and rotate to lock it in place.
6. Apply thermal compound to the CPU Integrated Heat Spreader (IHS).
7. Align the mounting holes on the bracket with the standoffs and install the water block.
8. Secure the metal brackets and water block with the four nuts, applying appropriate mounting pressure.

Image: Illustrates Intel and AMD compatibility, special water channels within the radiator, and polymer-protected water tubes for durability.

4.4. Hononga Waea

1. Honoa te taura hiko papu ki te pane CPU_OPT, AIO_PUMP ranei i runga i to papahoahoa.
2. Connect the fan PWM cables to the fan splitter cable for synchronized fan speed control.
3. Connect the PWM splitter cable to the motherboard's CPU_FAN socket to power the fans.
4. Remove the protective caps from the ARGB 3-pin connectors.
5. Connect the fan ARGB cables to sync the lighting signal.
6. Honoa te taura rama ARGB ki te putanga ARGB 3-pine +5V o te papahoahoa hei whakahaere rama.

Image: Shows the water block with clear labels for the ARGB light interface (5V 3pin) and water pump power (12V DC/4pin) connections.

Image: Details the PWM intelligent control features of the fans, including high airflow (66.17 CFM), S-FDB bearing, quiet operation (1550 RPM), and 4-pin PWM connector.

4.5. Aratohu Ataata Tāutanga

5. Nga Tohutohu Whakahaere

Once installed, the Thermalright Aqua Elite 240 ARGB CPU Water Cooler operates automatically based on your motherboard's settings.

• Mana Kiri: The PWM fans will adjust their speed automatically via the motherboard's 4-pin PWM header based on CPU temperature. You can configure fan curves in your motherboard's BIOS/UEFI settings or through compatible software.
• ARGB Rama: The addressable RGB lighting on the fans and water block can be controlled via your motherboard's 5V 3-pin ARGB header. Use your motherboard's RGB synchronization software (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, ASRock Polychrome Sync) to customize lighting effects. Ensure your motherboard supports 5V 3-pin ARGB; this cooler is not compatible with 12V 4-pin RGB headers.
• Mahinga Puma: The water pump operates continuously to circulate coolant. Ensure the pump power cable is securely connected to a dedicated AIO_PUMP or CPU_OPT header for stable operation.

Image: Emphasizes that the cooler supports only 5V 3-pin ARGB and is not compatible with 12V 4-pin RGB connections.

6. Tiaki

Mā te tiaki auau ka roa te ora me te mahi tino pai o tō pouaka whakamatao wai.

• Whakapai puehu: Horoia te puehu o ngā tara o te pūwhakamahana me ngā mata o te pā hau i ia wā, mā te whakamahi i te hau kōpeke. Kia mōhio kei te hurihuri ngā pā hau i te wā e horoia ana hei ārai i te kino.
• Tirohanga ngongo: Check the water tubes for any signs of kinks, damage, or leaks. While the polymer compilation protection water pipes are designed for low evaporation and high life, regular visual inspection is recommended.
• Whakapiri Weariki: Re-applying thermal paste is generally not required unless the cooler is removed. If re-installation is necessary, clean off old thermal paste and apply new compound.

7. Te Raru

If you encounter issues with your Thermalright Aqua Elite 240 ARGB CPU Water Cooler, refer to the following common troubleshooting steps:

• Kāore he hiko/Kāore ngā pā e hurihuri ana:
  • Check all power connections, especially the pump power cable to the motherboard's AIO_PUMP/CPU_OPT header and the fan splitter cable to the CPU_FAN header.
  • Ensure the cables are fully seated.
  • Verify fan settings in BIOS/UEFI are not set to "0 RPM" or a very low threshold.
• Kaore he rama ARGB:
  • Confirm the ARGB 3-pin cable is correctly connected to a +5V ARGB header on your motherboard.
  • Me whakarite kua tāuta tika te pūmanawa RGB o tō papahoahoa, ā, kua whirihorahia hoki.
  • Verify that the ARGB header is enabled in your motherboard's BIOS/UEFI.
  • Remember, this cooler supports 5V 3-pin ARGB only, not 12V 4-pin RGB.
• Te Paemahana PTM Teitei:
  • Check if the water block is securely mounted to the CPU with adequate pressure.
  • Ensure thermal paste was applied correctly and evenly.
  • Verify that the pump is running (you might hear a faint hum or feel vibrations).
  • Check fan orientation on the radiator for proper airflow (intake or exhaust, depending on case setup).
  • Horoia nga puehu i runga i nga tara radiator.

8. Whakatakotoranga

Image: A detailed table outlining the specifications of the Thermalright Aqua Elite 240 ARGB, including dimensions, fan speeds, noise levels, and power requirements.

9. Pūtāhui me te Tautoko

Ka hangaia nga hua Thermalright ki nga paerewa kounga teitei. Mo nga korero whakamana, tautoko hangarau, patai ratonga ranei, tirohia te Thermalright mana webpaetukutuku, whakapā atu ranei ki to kaihokohoko o to rohe. Puritia to tohu hoko mo nga kereme whakamana.