Pukapuka Kaiwhakamahi mō te CipherLab WR30 Paerewa Raupapa 2D Imager

Kupu Whakataki

This manual provides essential information for the proper use, setup, operation, and maintenance of your CipherLab WR30 Standard Series 2D Imager. The WR30 is a high-performance 2D imager designed for efficient data capture, featuring a Standard Range 2D Imager (SE4770) and a kit that includes a ring trigger and a UK adapter. Please read this manual thoroughly before operating the device to ensure optimal performance and safety.

Nga korero haumaru

Kia mau ki nga whakaritenga haumaru e whai ake nei hei aukati i te whara me te kino o te taputapu:

• Kaua e tukuna te taputapu ki te wera nui, te makuku, te ra tika ranei.
• A ape i te tuku i te taputapu, te tuku ranei ki nga paanga kino.
• Kaua e ngana ki te wetewete, ki te whakarereke ranei i te taputapu. Tukuna atu nga ratonga katoa ki nga kaimahi whai tohu.
• Use only the specified power adapter (UK adapter) provided with the kit.
• Keep the device away from liquids and corrosive materials.
• Do not stare directly into the imager's light source when in operation.

Ihirangi mokete

Manatokona kei roto katoa nga mea kei roto i to kete:

• CipherLab WR30 Standard Range 2D Imager (SE4770)
• Ringi Keu
• UK Pūurutau Hiko
• Tenei Manual Kaiwhakamahi

Tatūnga

Attaching the Ring Trigger

1. Carefully align the CipherLab WR30 imager with the mounting mechanism on the ring trigger.
2. Gently slide the imager onto the trigger until it clicks securely into place. Ensure a firm connection.
3. Test the connection by gently pulling on the imager; it should not detach easily.

Te Whakamana i te Pūrere

1. Connect the UK power adapter to a suitable power outlet.
2. Plug the adapter's connector into the power port on the CipherLab WR30 imager.
3. The device will typically power on automatically or indicate readiness with an LED light. Refer to the device's LED indicator guide for specific status meanings.

Whakaahua 1: The CipherLab WR30 Standard Series 2D Imager shown with its integrated ring trigger. The device is black with a yellow trigger button, designed for ergonomic handling and efficient barcode scanning. The front features the imager lens, and the top surface has ventilation grilles and the CipherLab logo.

Te whakahaere i te Pūrere

Matawai Waehere Pae

1. Ensure the device is powered on and connected to your host system (e.g., computer, mobile device) via its communication interface (e.g., Bluetooth, USB, if applicable).
2. Point the imager window directly at the barcode you wish to scan.
3. Press and hold the ring trigger button. A red aiming beam or illumination light will appear.
4. Position the aiming beam over the center of the barcode.
5. Once the barcode is successfully read, the device will typically emit an audible beep and/or a visual indicator (e.g., green LED).
6. Tukua te paatene keu.

The Standard Range 2D Imager (SE4770) is optimized for reading various 1D and 2D barcodes from typical scanning distances.

Hononga

The CipherLab WR30 supports various connectivity options depending on the specific model configuration. Refer to your device's quick start guide or technical specifications for details on pairing with Bluetooth-enabled devices or connecting via USB.

Te tiaki

Te horoi i te Pūrere

• Turn off the device and disconnect it from any power source before cleaning.
• Kia ngawari te whakamahi i te kakahu ngohengohe, karekau he ngongo dampened with water or a mild, non-abrasive cleaner to wipe the exterior of the device.
• For the imager window, use a lens cleaning cloth or a soft cloth with a small amount of lens cleaner. Do not use abrasive materials or harsh chemicals.
• Kia tino mohio kei uru te wai ki roto i ngā pūaha o te taputapu.
• Allow the device to dry completely before reconnecting power or operating.

Rokiroki

When not in use, store the CipherLab WR30 in a cool, dry place, away from direct sunlight and extreme temperatures. Protect it from dust and physical damage.

Raparongoā

Whakatakotoranga

Pūtāhui me te Tautoko

CipherLab products are designed for reliability and performance. For information regarding warranty coverage, please refer to the warranty card included with your product or visit the official CipherLab website. For technical support, troubleshooting assistance, or service inquiries, please contact CipherLab customer support through their official channels.

Tautoko Aipurangi: Visit the official CipherLab webpae tukutuku mō ngā FAQ, ngā taraiwa, me ngā tango pūmanawa.

Mōhiohio Whakapā: Refer to the CipherLab website or your product packaging for regional contact details.