VEVOR Commercial Ice Cream Display Case

1. Kupu Whakataki

This manual provides essential information for the safe and efficient operation of your VEVOR Commercial Ice Cream Display Case. Please read these instructions thoroughly before installation, operation, or maintenance. Retain this manual for future reference.

Image: VEVOR Commercial Ice Cream Display Case, showcasing its design and clear glass top.

2. Nga korero haumaru

Me whai i nga wa katoa i nga whakaritenga haumaru ina whakamahi taputapu hiko hei whakaiti i te tupono o te ahi, te ru hiko, me te whara whaiaro.

• Me whakarite kia tika te turanga o te waahanga.
• Kaua e whakahaeretia te waeine me te taura hiko kua pakaru, te mono ranei.
• Puritia nga tuwhera o te hau ki nga arai.
• Kaua e rokirokia nga matū pahū penei i te kēne aerosol me te aporo muramura ki roto i tenei taputapu.
• Ko nga kaimahi whai tohu anake me mahi whakatikatika.

3. Tatūnga

3.1 Te Wetewete

Tangohia marietia ngā rauemi tākai katoa, tae atu ki te rīpene me te kiriata tiaki. Tirohia te waeine mō ngā kino tuku. Pūrongohia tonutia ngā kino ki te kaikawe me te kaiwhakarato.

3.2 Whakanoho

Place the display case on a firm, level surface capable of supporting its weight when fully loaded. Ensure adequate ventilation around the unit. Maintain a minimum clearance of 10 cm (4 inches) from walls or other objects to allow for proper airflow to the condenser. Avoid direct sunlight, heat sources, or areas with high humidity.

3.3 Te horoi tuatahi

Before first use, clean the interior and exterior surfaces with a mild detergent and warm water. Rinse thoroughly and dry with a soft cloth.

3.4 Hononga Hiko

Connect the unit to a dedicated, grounded electrical outlet that matches the voltage me amperage requirements specified on the product label. Do not use extension cords or adapter plugs.

3.5 Whakaohoatanga Tuatahi

After placement and connection, allow the unit to stand for at least 2-4 hours before plugging it in. This allows refrigerants to settle. Once plugged in, turn on the unit and allow it to run empty for several hours to reach the desired operating temperature before loading products.

4. Nga Tohutohu Whakahaere

4.1 Te Mana Pawera

The display case features a front-facing temperature control. Adjust the thermostat to set the desired temperature for your ice cream products. Refer to the control panel for specific temperature settings and indicators.

4.2 Te uta i ngā hua

Load products evenly into the provided PVC-coated steel baskets. Do not block the internal air vents, as this can impede proper cooling. Ensure products are within the designated load lines to allow the sliding glass doors to close completely.

4.3 Sliding Glass Doors

The unit is equipped with top sliding glass doors for easy access. Ensure the doors are fully closed when not in use to maintain optimal temperature and energy efficiency.

4.4 Te Whakamahi i te Raka

The display case includes a lock mechanism for securing the contents. To lock the unit, insert the key into the lock cylinder located on the sliding glass door frame and turn it. Reverse the process to unlock. For a visual guide, please refer to the video below:

Video: Demonstrates the correct procedure for locking and unlocking the VEVOR Commercial Ice Cream Display Case.

5. Tiaki

Mā te tiaki auau ka tino pai te mahi me te roa o te ora o tō pouaka whakaatu.

5.1 Te horoi

• roto: Clean regularly with a mild, non-abrasive detergent and warm water. Rinse and dry thoroughly.
• Waho: Wipe down with a soft cloth and mild cleaner. Avoid harsh chemicals that may damage the finish.
• Kuaha Karaihe: Use a glass cleaner and a soft cloth to keep the glass clear for optimal product visibility.

5.2 Whakakore hukapapa

This unit requires manual defrosting when ice buildup on the evaporator coils reaches approximately 6 mm (1/4 inch) thickness. To defrost:

1. Tangohia ngā hua katoa ka rongoa ki roto i tētahi atu pouaka tio.
2. Whakawetohia te waeine ka unu mai i te putanga hiko.
3. Leave the sliding doors open to allow ice to melt naturally. Place towels or a shallow pan to collect water.
4. Once defrosted, clean and dry the interior.
5. Monohia anō te waeine, ka waiho kia eke ki te pāmahana mahi i mua i te tāuta anō i ngā hua.

5.3 Whakapai i te Coil Condenser

The condenser coils should be cleaned every 3-6 months, or more frequently in dusty environments, to ensure efficient operation. Unplug the unit before cleaning. Use a stiff brush or vacuum cleaner to remove dust and debris from the condenser fins.

6. Te Raru

I mua i te whakapā atu ki te ratonga, tirohia nga take e whai ake nei:

7. Whakatakotoranga

8. Pūtāhui me te Tautoko

For warranty information or technical support, please refer to the warranty card included with your product or contact VEVOR customer service directly. Ensure you have your model number and purchase date available when contacting support.