1. Hua Neke Atuview
The MiBOXER Y3 RGB+CCT Vertical Remote provides comprehensive control over compatible RGB+CCT LED lighting systems. This remote allows for precise adjustments of RGB colors, color temperature (CCT), and brightness. Utilizing 2.4GHz wireless technology, it ensures reliable communication with your lighting devices. Its ergonomic vertical design and intuitive interface are designed for ease of use, enabling users to effortlessly customize lighting for various environments.
Āhuatanga matua:
- RGB, CCT, and Brightness Control: Adjust colors, color temperature, and brightness with ease.
- Hangarau Ahokore 2.4GHz: Ensures reliable, long-range connectivity.
- Hoahoa Poutū: Ergonomic and easy-to-use layout for quick adjustments.
- Multi-Color and Dimmable: Create customized lighting scenes with vibrant colors and dimming options.
- Hototahi maha: Works with MiBOXER RGB+CCT lighting products.
Figure 1: MiBOXER Y3 RGB+CCT Vertical Remote with its retail packaging.
2. Tohutohu Tatūnga
2.1 Tāuta Pūhiko
The MiBOXER Y3 remote requires two AAA batteries (not included). To install:
- Kimihia te uhi o te wahanga pākahiko kei muri o te mamao.
- Peia te uhi ki raro kia tuwhera.
- Whakauruhia nga pākahiko AAA e rua, kia tika te polarity (+ me te -).
- Whakahokia te uhi ki tona waahi kia pao pai.
2.2 Linking the Remote to Lighting Devices
To control your MiBOXER RGB+CCT lighting devices, the remote must be linked to them. This process typically involves a specific sequence of actions on both the remote and the lighting device. Refer to your specific MiBOXER lighting product's manual for detailed linking instructions, as the procedure may vary slightly between different light models. A common linking procedure is as follows:
- Ensure the lighting device is powered off.
- Power on the lighting device.
- Within 3 seconds of powering on the light, press the "Zone ON" button (labeled "I" or "1") on the remote for the desired zone.
- The light should flash several times, indicating successful linking.
- If linking fails, repeat the process.
To unlink a device from a zone, power on the light and within 3 seconds, press the "Zone ON" button (labeled "I" or "1") five times rapidly for the corresponding zone. The light should flash multiple times to confirm unlinking.
3. Nga Tohutohu Whakahaere
The MiBOXER Y3 remote features an intuitive layout for controlling various lighting parameters. Familiarize yourself with the buttons and sliders as shown in Figure 2.
Figure 2: MiBOXER Y3 Remote Control button layout and functions.
3.1 Nga Mahi Patene:
| Pātene/Mana | Mahi |
|---|---|
| Maama Tohu | Flashes to confirm button presses. |
| Rēreti RGB | Slide to select desired RGB color. |
| Rēreti Tirohanga | Slide to adjust light brightness (0-100%). |
| Master ON (I/ON) | Turns all linked lights ON. |
| Master OFF (O/OFF) | Turns all linked lights OFF. |
| White Light (W) | Activates pure white light mode. |
| Speed-/CCT-/Saturation- | Decreases speed in dynamic mode, decreases color temperature (warmer white), or decreases color saturation. |
| Speed+/CCT+/Saturation+ | Increases speed in dynamic mode, increases color temperature (cooler white), or increases color saturation. |
| Dynamic Mode (M) | Cycles through various dynamic lighting effects. Press repeatedly to change effects. |
| Zone ON (1, 2, 3 - "I") | Turns ON lights linked to the specific zone. Used for linking/unlinking. |
| Zone OFF (1, 2, 3 - "O") | Turns OFF lights linked to the specific zone. |
3.2 Mahi Whanui:
- Whakakaina/Weto Raiti: Use the "Master ON" or "Master OFF" buttons for all lights, or "Zone ON" / "Zone OFF" for specific zones.
- Adjusting Color: Slide your finger along the "RGB Slider" to select your desired color.
- Whakaritea Tirohanga: Slide your finger along the "Brightness Slider" to increase or decrease the light intensity.
- Te Whakatikatika i te Pāmahana Tae (CCT): In white light mode, use the "CCT-" and "CCT+" buttons to make the white light warmer or cooler.
- Aratau Hihiko: Press the "M" button to activate dynamic lighting modes. Use "Speed-" and "Speed+" to adjust the speed of the current dynamic effect.
- Saturation Adjustment: In RGB mode, use "Saturation-" and "Saturation+" to adjust the intensity of the color.
4. Tiaki
Proper maintenance ensures the longevity and optimal performance of your MiBOXER Y3 remote.
- Te horoi: Wipe the remote with a soft, dry cloth. Do not use abrasive cleaners, solvents, or wet cloths, as these can damage the surface or internal components.
- Whakakapinga Pūhiko: Replace batteries when the indicator light becomes dim or the remote's response becomes inconsistent. Always use new AAA batteries and dispose of old batteries responsibly.
- Rokiroki: Store the remote in a cool, dry place away from direct sunlight and extreme temperatures. If storing for extended periods, remove the batteries to prevent leakage.
- Aukati i te makuku: This remote is not waterproof. Keep it away from water and high humidity environments.
5. Te Raru
If you encounter issues with your MiBOXER Y3 remote, refer to the following troubleshooting steps:
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Kāore te mamao e aro mai ki ngā pēhitanga pātene. | Nga pākahiko mate, iti ranei. Remote not linked to lights. Tuhinga o mua. | Whakakapihia nga pākahiko. Re-link the remote to the lighting devices (refer to Section 2.2). Move closer to the lighting devices. |
| Kāore ngā rama e rerekē te tae/te kanapa. | Ko te aratau hē i tohua. Remote not linked to the specific zone. | Ensure you are in the correct mode (e.g., RGB for color, CCT for white temperature). Verify the remote is linked to the correct zone. |
| Kāore te rama tohu e kimo ana. | Nga pākahiko mate. Hara o roto. | Whakakapihia nga pākahiko. Mena ka mau tonu te raruraru i muri i te whakakapinga pākahiko, whakapā atu ki te ratonga kiritaki. |
| Interference with other 2.4GHz devices. | Proximity to other wireless devices. | Move the remote or other 2.4GHz devices further apart. |
6. Whakatakotoranga
Technical specifications for the MiBOXER Y3 RGB+CCT Vertical Remote.
| Āhuahira | Taipitopito |
|---|---|
| Tau tauira | Y3 |
| Waitohu | MIBOXER |
| Momo Mana | RGB+CCT Vertical Remote |
| Hangarau Ahokore | 2.4GHz |
| Tuku Hiko | 2x AAA Battery (kaore i uru) |
| Āhuahira Motuhake | RGB/CCT/brightness dimmable |
| Taumaha Tūemi | 4.8 hekere (tata ki te 136 karamu) |
| Ahu mōkihi | 6.5 x 3 x 2 inihi (tata ki te 16.5 x 7.6 x 5.1 cm) |
Figure 3: Dimensions of the MiBOXER Y3 Remote Control and its packaging.
7. Pūtāhui me te Tautoko
For warranty information, please refer to the documentation provided with your specific MiBOXER lighting product or contact the retailer where the product was purchased. MiBOXER products typically come with a manufacturer's warranty covering defects in materials and workmanship.
For technical support or further assistance, please visit the official MiBOXER website or contact their customer service department. Contact details are usually available on the product packaging or the brand's official online presence.
