1. Kupu Whakataki
This manual provides comprehensive instructions for the installation, operation, and maintenance of your MOES 30W Power Delivery USB C Wall Electrical Outlet. This ETL Listed outlet features a 15 Amp capacity, an ultra-speed Type C receptacle, and is designed for efficient charging of various compatible devices.
Image 1: MOES 30W Power Delivery USB C Wall Electrical Outlet with its packaging.
2. Nga korero haumaru
WARNING: Risk of electric shock. Improper installation can result in serious injury or death. Always turn off power at the circuit breaker before installation.
- ETL kua whakarārangitia: This product is ETL Listed, ensuring it meets recognized safety standards.
- TampHoahoa Atete-er: Built-in shutters prevent foreign objects from being inserted into the receptacles, enhancing safety, especially in households with children.
- Parenga Awa Tuwera: Designed to safeguard connected electronics from receiving excessive power.
- Voltage: Operates at 120 Volts. Ensure your electrical system is compatible.
- Me korero ki tetahi tohunga hiko ki te kore koe e tino mohio mo tetahi waahanga o te tukanga whakauru.
Whakaahua 2: Ka mutuview of the MOES outlet's safety features, including tamper-resistant design and various protections.
3. Ihirangi mokete
Manatokona kei roto katoa nga mea kei roto i te kete:
- 1 x MOES 30W Power Delivery USB C Wall Electrical Outlet
- 1 x Pereti Taiepa
- 4 x Tiuri
- 1 x Pukapuka Kaiwhakamahi
4. Whakatakotoranga
| Āhuahira | Taipitopito |
|---|---|
| Waitohu | MOES |
| Tauira | Type 1C/1A 30WPD 15A Outlet |
| Voltage | 120 Volts |
| Ampwhakatipu | 15 Amp |
| Putanga USB (Tapeke) | 30W Maora |
| USB Momo-C | PD3.0 (Power Delivery) |
| USB Momo-A | QC2.0 (Te Utu Tere) |
| Rauemi | Kirihou |
| Tae | Mā |
| Pūrere Hototahi | Smartphone, Tablet, Laptop (USB-C PD compatible) |
| Tiwhikete | ETL kua raarangi |
Image 3: Dimensions of the MOES USB C Wall Electrical Outlet for installation planning.
5. Tatūnga me te Tāuta
- Whakaweto Hiko: Locate your circuit breaker panel and turn off the power to the outlet you intend to replace. Use a voltage tester to confirm the power is off before proceeding.
- Tangohia te Putanga Tawhito: Unscrew and carefully remove the existing wall plate and outlet from the electrical box. Disconnect the wires from the old outlet.
- Whakapaia nga Waea: If necessary, strip approximately 1/2 inch (12-15mm) of insulation from the ends of the electrical wires (Hot, Neutral, Ground).
- Tūhono Waea:
- Honoa te Waea wera (usually black or red) to the brass screw terminal.
- Honoa te Waea kupapa (usually white) to the silver screw terminal.
- Honoa te Taputapu whenua (usually green or bare copper) to the green screw terminal.
- Mount New Outlet: Carefully push the wired outlet back into the electrical box. Secure it with the provided screws.
- Tāutahia te Pereti Taiepa: Attach the screwless wall plate by first screwing the clear inner part to the outlet, then snapping the decorative outer plate into place.
- Whakaora i te Mana: Return to your circuit breaker panel and turn the power back on. Use a voltage tester to confirm power is restored to the new outlet.
Aratohu Ataata Tāuta:
Video 1: Step-by-step guide on how to install the MOES wall outlet.
6. Nga Tohutohu Whakahaere
The MOES 30W Power Delivery USB C Wall Electrical Outlet provides both traditional AC power and advanced USB charging capabilities.
- Pouaka AC: Use the two standard 15 Amp AC outlets for powering appliances and devices requiring 120V.
- USB Type-C Port (PD3.0): Plug in your USB-C compatible devices, such as iPhones (15 Series), MacBooks, iPads, and Samsung Galaxy phones, for rapid charging up to 30W via Power Delivery 3.0.
- USB Type-A Port (QC2.0): Connect devices that use a standard USB-A cable for charging, supporting Quick Charge 2.0 for faster charging where compatible.
- Hangarau maramara atamai: The integrated smart chip automatically detects the connected device and delivers the optimal power level for fast and efficient charging.
Image 4: Power Delivery and Quick Charge capabilities of the MOES outlet.
Image 5: Universal compatibility of the MOES outlet with various devices.
Ka mutu te huaview Ataata:
Ataata 2: Ka mutuview of the MOES 30W PD USB Wall Outlet features and usage.
7. Tiaki
- Te horoi: Disconnect power before cleaning. Use a soft, dry cloth to wipe the surface of the outlet and wall plate. Avoid using liquid cleaners or abrasive materials.
- Takitaki auau: Periodically inspect the outlet for any signs of damage, loose connections, or discoloration. If any issues are found, turn off power and consult a qualified electrician.
8. Te Raru
| Raruraru | Take pea | Rongoā |
|---|---|---|
| No power from AC receptacles or USB ports. | Kua motu te pūwehe ara iahiko; kua koretake te hononga waea. | Check and reset the circuit breaker. If issue persists, turn off power and check wiring connections. Consult an electrician if needed. |
| Ko nga taputapu USB e tere ana te utu. | Device not compatible with fast charging; faulty cable; multiple devices drawing power simultaneously. | Ensure your device supports PD3.0 (USB-C) or QC2.0 (USB-A). Try a different, high-quality charging cable. Disconnect other devices to test single-port performance. |
| Outlet feels warm. | Normal operation under heavy load; excessive load. | Slight warmth is normal. If it feels excessively hot, disconnect devices and reduce the load. Ensure proper ventilation. |
9. Pūtāhui me te Tautoko
For warranty information or technical support, please refer to the contact details provided in your product packaging or visit the official MOES webpae. Puritia to rihiti hoko mo nga kereme whakamana.
