1. Kupu Whakataki
This manual provides detailed instructions for the installation, operation, and maintenance of your ASRock Steel Legend SL-850G 850W Full Modular Power Supply. Please read this manual thoroughly before installation to ensure proper setup and safe operation. This power supply unit (PSU) is designed to deliver stable and efficient power to your personal computer system.
2. Nga waahanga matua
- 80 PLUS Gold Tiwhikete: Ensures high power efficiency, reducing heat generation and operating costs.
- Cybenetics Platinum and LAMBDA A+ Certified: Guarantees superior efficiency and quiet operation.
- ATX3.1 & PCIe5.1 Ready: Fully compliant with the latest ATX 3.1 and PCIe 5.1 standards, including native 12V-2x6 cable support for modern graphics cards.
- Fully Modular Cable Design: Allows for cleaner cable management and improved airflow by connecting only the necessary cables.
- 100% Highly Reliable Japanese Capacitors: Utilizes high-quality Japanese capacitors rated for 105°C, ensuring long-term stability and durability.
- iCool Intelligent Fan Control Mode: Optimizes fan speed based on load and temperature, providing quiet operation at low to medium loads.
- Built-in 5V BOOST Function: Provides stable 5V power delivery.
- 135mm Striped Axial FDB Fan: Features a Fluid Dynamic Bearing (FDB) fan for quiet operation and extended lifespan.
3. Ihirangi mokete
Manatokohia kei roto katoa nga mea kei roto i te kete i mua i te haere ki te whakaurunga.
Image: Contents of the ASRock Steel Legend SL-850G Power Supply package.
- ASRock Steel Legend SL-850G Power Supply Unit
- Te Hiko AC
- Modular Cable Set (MB 24-Pin, CPU 4+4 Pin, PCIe 12V-2x6, PCIe 6+2 Pin, SATA, PATA)
- Aratohu Tāuta / Manual Kaiwhakamahi
- Kaiwhakamātautau PSU ATX 24-Pin
- Peeke taura
- Nga here taura Velcro
- Nga here taura
- Whakaeke Tiu
Image: Detailed diagram of included modular cables and their lengths.
4. Tatūnga me te Tāuta
Proper installation is crucial for the performance and longevity of your power supply. Always ensure your system is powered off and unplugged from the wall outlet before installation.
4.1 Whakatupato Haumaru
- Disconnect the AC power cord from the wall outlet before handling the PSU or any internal components.
- Me whakarite te turanga tika hei aukati i te tuku hiko (ESD).
- Kaua e whakatuwheratia te PSU casing. Te teitei voltages are present inside, even when unplugged.
4.2 Tāutanga Tinana
- Mount the PSU into the designated power supply bay in your computer case. Ensure the fan is facing the correct direction for optimal airflow (usually facing down if there's a bottom vent, or up if it's a top-mounted PSU).
- Whakamauhia te PSU ki te pouaka mā te whakamahi i ngā tīwiri whakapiri kua whakaratohia.
4.3 Hononga Taura
Connect only the necessary modular cables to your components. This improves cable management and airflow within your case.
Whakaahua: Taha view of the power supply with modular cable connections clearly labeled.
- Mana Papa Matua: Honoa te taura ATX 24-pin ki to papahoahoa.
- Mana PTM: Connect the 4+4-pin EPS/ATX12V cable(s) to your motherboard's CPU power connector(s).
- PCIe Power (Graphics Cards): For modern graphics cards requiring a 12V-2x6 connector, use the dedicated cable. Ensure the connector is fully seated. For other graphics cards, use the 6+2-pin PCIe cables.
Image: Proper connection of the PCIe 12V-2x6 cable, highlighting the importance of full insertion.
- Mana SATA: Connect SATA power cables to your storage drives (SSDs, HDDs) and other SATA-powered devices.
- PATA Power (Molex): Connect PATA power cables to older peripherals or case fans if needed.
After connecting all necessary internal cables, connect the AC power cord to the PSU and then to a wall outlet.
5. Nga Tohutohu Whakahaere
5.1 Kei te Hiko / Weto
- Me whakarite kia honoa nga taura katoa.
- Flip the main power switch on the back of the PSU to the 'I' (On) position.
- Power on your computer system via the case power button.
- To power off, shut down your operating system normally, then flip the main power switch on the PSU to the 'O' (Off) position.
Image: Rear panel of the power supply, indicating the main power switch and iCool fan control switch.
5.2 iCool Intelligent Fan Control
The ASRock Steel Legend SL-850G features an iCool switch on the rear panel. This switch controls the fan's operation mode:
- Kei te wātea a iCool: The fan will remain off at low to medium loads for silent operation. It will activate automatically when the load or temperature increases.
- Whakawetohia te iCool: The fan will operate continuously, regardless of the load or temperature. This provides maximum cooling but may result in higher noise levels.
Kōwhiria te aratau e tino pai ana ki a koe mō te haruru me te mahi whakamatao.
Image: iCool Mode Curve Diagram, showing fan noise levels versus load percentage.
6. Tiaki
Regular maintenance helps ensure the longevity and optimal performance of your power supply.
- Te horoi: Periodically clean the exterior of the PSU and its fan grille to prevent dust buildup. Use compressed air to gently clear dust from the fan blades and heatsinks. Ensure the system is powered off and unplugged before cleaning.
- Whakaha Uepu: Ensure cables are neatly routed and do not obstruct airflow within the case.
- Taiao: Operate the PSU in a well-ventilated area, away from excessive heat, humidity, and direct sunlight.
7. Te Raru
If you encounter issues with your power supply, try the following troubleshooting steps:
- Kore Mana:
- Tirohia mehemea kei te hono pai te taura hiko AC ki te PSU me te putanga pakitara.
- Ensure the main power switch on the PSU is in the 'I' (On) position.
- Manatokohia kei te mahi te putanga o te pakitara ma te hono ki tetahi atu taputapu.
- Use the included 24-pin PSU tester to check if the PSU powers on independently.
- Pūnaha Haumarutanga/Kati Matarangi:
- Ensure all modular cables, especially the 12V-2x6 PCIe cable, are fully seated and properly connected.
- Check for any loose connections to the motherboard, CPU, or graphics card.
- Verify that your system's power requirements do not exceed the PSU's 850W capacity.
- Kāore te Pā e Hurihuri (iCool ON):
- If iCool mode is ON, the fan may not spin at low loads. This is normal operation.
- If the fan does not spin even under load, try switching iCool mode OFF to force continuous fan operation. If it still doesn't spin, contact support.
- Haruru rerekee:
- Ensure no cables are obstructing the fan.
- If the noise persists and is not related to fan operation, contact support.
Ki te kore enei mahi e whakatau i te take, tena koa tirohia te waahanga Whakaputanga me te Tautoko mo etahi atu awhina.
8. Whakatakotoranga
| Āhuahira | Whakatakotoranga |
|---|---|
| Tauira | SL-850G |
| Wat Putangatage | 850 Watts |
| 80 PLUS Tiwhikete | Koura |
| Cybenetics Certification | Platinum, LAMBDA A+ |
| Tauwehe Puka | ATX |
| Hoahoa Whakawhiwhi Hiko | Kōwae katoa |
| Tikanga whakamatao | Hau (Pā Hau 135mm FDB) |
| Pūrere Hototahi | Rorohiko Whaiaro |
| Momo Tuhono | ATX |
| Rahi Hua (L x W x H) | 5.91 x 5.91 x 3.39 inihi |
| Taumaha Tūemi | 3 pauna |
9. Pūtāhui me te Tautoko
The ASRock Steel Legend SL-850G Power Supply comes with a remarkable 10-Tau Pūtāhui, covering defects in materials and workmanship under normal use. For warranty claims or technical support, please contact ASRock customer service through their official webte pae, te korero whakapā ranei kei roto i to kete hua.
For the latest drivers, FAQs, and support resources, visit the official ASRock webpae: www.asrock.com
10. Hua Ataata
ASRock Power Supplies Steel Legend Series Features
Ataata: Kua mutuview of the key features of the ASRock Steel Legend series power supplies, including design, efficiency, and cooling.
ASRock Power Supplies
Video: A general introduction to ASRock's power supply lineup, showcasing various models and their design elements.
