Kupu Whakataki
This manual provides detailed instructions for the 8BitDo Ultimate Mini Wired Controller for Xbox. It covers essential information regarding setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device. This controller is officially licensed for Xbox and compatible with Xbox Series X|S, Xbox One, and Windows 10/11.
Tatūnga
The 8BitDo Ultimate Mini Wired Controller is designed for simple plug-and-play functionality. Follow these steps to connect your controller:
- Ensure your Xbox console (Xbox Series X|S, Xbox One) or Windows PC (Windows 10/11) is powered on.
- Locate an available USB port on your console or PC.
- Connect the USB-C end of the provided cable to the controller and the USB-A end to your console or PC.
- The controller will automatically be detected and configured. The Xbox button on the controller will illuminate to indicate a successful connection.
- For audio, connect a standard CTIA connector 3.5mm headset to the audio jack located on the controller.
The controller is now ready for use. No additional drivers are typically required for supported systems.
Te whakahaere i te Kaiwhakahaere
The 8BitDo Ultimate Mini Wired Controller features a standard layout with several advanced functionalities:
- Nga Riipoi Whakaaetanga Hall: These joysticks provide enhanced precision and durability, reducing drift over time.
- Nga Kaipupuri Hiringa: Experience tactile feedback with vibration in the triggers, adding immersion to your gameplay.
- Ngā Pāma me te Papa-D kua Whakapaipaitia: Designed for a responsive and tactile feel, ensuring accurate inputs.
- Crystal Action Buttons: Durable and clear action buttons for a consistent feel.
RGB Lighting Fire Ring
The controller features interactive RGB lighting around the joysticks, known as the 'Fire Ring'. This lighting can be adjusted through multiple modes:
- Fire Ring Mode: Displays a dynamic lighting effect.
- Light-tracing Mode: Follows your joystick movements with light.
- Rainbow Ring Mode: Cycles through a spectrum of colors.
To cycle through the lighting modes or turn off the lighting, locate the small button positioned below the right analog stick. Press this button to change modes or deactivate the lighting as desired.
Te tiaki
Proper maintenance ensures the longevity and performance of your 8BitDo Ultimate Mini Wired Controller:
- Te horoi: Whakamahia he kakahu ngohengohe, maroke hei muru i te mata o te kaiwhakahaere. Mo te paru maro, paku dampHoroia te kakahu ki te wai. Āta karohia te whakamahi i ngā matū kaha, i ngā kaihoroi whakakoi rānei, nā te mea ka kino pea te āhua o te kaiwhakahaere me ngā wāhanga o roto.
- Rokiroki: Penapenahia te pūmana ki te wāhi hauhautanga, maroke, kia matara atu i te rā tika me ngā pāmahana tino kino. Kaua e whakatakoto i ngā mea taumaha ki runga i te pūmana.
- Tiaki taura: Handle the USB-C cable gently. Avoid sharp bends, kinks, or pulling the cable forcefully from the port. If the cable becomes damaged, replace it with a compatible USB-C cable to ensure proper functionality and safety.
Raparongoā
Mena ka pāngia koe e ngā raruraru me tō pūmana, tirohia ngā otinga noa e whai ake nei:
- Kaiwhakahaere Kaore i te Whakautu:
- Me whakarite kei te hono tika te taura USB ki te kaiwhakahaere me te papatohu/rorohiko.
- Ngāna ki te hono i te pūmana ki tētahi atu tauranga USB.
- Test the controller on another compatible device (if available) to determine if the issue is with the controller or the original device.
- Tīmata anō i tō papatohu, i tō PC rānei.
- Lighting Issues (Too Bright/Not Working):
- Press the small button located below the right analog stick to cycle through lighting modes or turn the lighting off/on. Repeated presses will change the effect or brightness.
- Audio Jack Not Working:
- Ensure your headset uses a standard CTIA connector.
- Verify the headset is fully plugged into the 3.5mm audio jack on the controller.
- Whakamātauria te pane whakarongo ki tētahi atu pūrere hei whakaū kei te tika te mahi.
- Te Whakaroa o te Whakauru, te Momotu rānei:
- Ensure the USB cable is not damaged. Replace if necessary.
- Avoid using USB hubs if possible; connect directly to the console/PC.
If these steps do not resolve the issue, please refer to the Support section for further assistance.
Whakatakotoranga
| Āhuahira | Whakaahuatanga |
|---|---|
| Tau tauira | 6922621507000 |
| Hononga | Wired USB (USB-C to USB-A) |
| Hototahi | Xbox Series X|S, Xbox One, Windows 10/11 |
| Nga waahanga motuhake | Hall Effect Joysticks, Impulse Triggers, RGB Lighting Fire Ring (multiple modes), Refined Bumpers and D-pad, 3.5mm Audio Jack (CTIA standard), Crystal Action Buttons |
| Ahu | 7.48 x 5.51 x 0.79 inihi (189.9 x 140 x 20 mm) |
| Taumaha | 11.99 hekere (340 karamu) |
Pūtāhui me te Tautoko
Mōhiohio Pūtāhui: This product comes with a manufacturer's warranty. Please refer to the warranty card included in the product packaging or visit the official 8BitDo webpae mo nga tikanga me nga tikanga whakamana.
Tautoko Kiritaki: For technical assistance, product inquiries, or warranty claims, please visit the official 8BitDo support page or contact their customer service through the contact information provided on their webpae. Kia mōhio kei a koe te nama tauira o tō hua (6922621507000) me te taunakitanga hoko ina whakapā atu koe ki te tautoko.