Xigmatek Elysium II Full Tower PC Case User Manual

1. Kupu Whakataki

Thank you for choosing the Xigmatek Elysium II Full Tower PC Case. This manual provides detailed instructions for the installation, operation, and maintenance of your new computer chassis. Please read this manual thoroughly before beginning assembly to ensure proper installation and optimal performance.

Figure 1.1: Xigmatek Elysium II Full Tower PC Case with illuminated ARGB fans.

Āhuatanga matua:

• Four-sided tempered glass panels for a premium aesthetic and component visibility.
• Supports motherboards up to SSI EEB/CEB and E-ATX for high-end workstation and gaming builds.
• Extensive cooling support with pre-installed 16 x 140mm ARGB square ring fans.
• Accommodates large liquid cooling radiators: Top (up to 420mm), Front (up to 480mm), Rear (up to 280mm).
• CPU cooler height support up to 220mm.
• Graphics card length support up to 460mm.
• Convenient top I/O panel with USB Type-C x 1, USB 3.0 x 2, USB 2.0 x 1, and HD Audio Jack.

2. Whakatakotoranga

3. Tatūnga me te Tāuta

Before starting, ensure you have all necessary components and tools. Refer to your motherboard and component manuals for specific installation steps.

3.1 Ihirangi mokete

• Xigmatek Elysium II Full Tower PC Case
• 16 x 140mm ARGB Square Ring Fans (pre-installed)
• 2 x Galaxy II Fan Control Boxes
• Remote Control Sets
• Pouaka Awhina (ngiwiri, here taura, tuutuu, aha atu)
• Pukapuka Kaiwhakamahi (tenei tuhinga)

3.2 Tautuhinga Wae

Figure 3.1: Internal layout of the Elysium II case, highlighting fan mounts and component areas.

Pikitia 3.2: Ā-roto o muri view, showing cable management space and drive bay locations.

3.3 Nga Waahi Whakataunga

1. Whakapaia te Take: Carefully remove the tempered glass panels. Lay the case on its side on a stable, flat surface.
2. Tāuta Papa Matua: Install the necessary standoffs for your motherboard form factor. Gently place your motherboard onto the standoffs and secure it with screws.
3. Tāutahia te Waehanga Hiko (PSU): Mount your PSU into its designated compartment (top mount). Secure it with screws from the rear of the case. Route necessary cables through the cable management cutouts.
4. Tāutahia ngā Pūrere Rokiroki: Locate the drive bays for 2.5" SSDs and 3.5" HDDs. Secure your storage devices using the provided screws or tool-less mechanisms.
5. Install Graphics Card (GPU) and Expansion Cards: Remove the necessary PCIe slot covers. Insert your graphics card and any other expansion cards into their respective slots on the motherboard and secure them.
6. Tūhono Taura: Connect all power cables from the PSU to your motherboard, GPU, and storage devices. Connect the front panel I/O cables (USB, audio, power/reset buttons, LEDs) to the appropriate headers on your motherboard. Ensure all pre-installed fan cables and ARGB cables are connected to the fan control boxes and then to the motherboard or PSU as required.
7. Whakaha Uepu: Utilize the cable routing channels and tie-down points behind the motherboard tray to organize and secure cables. This improves airflow and aesthetics.
8. Reinstall Panels: Once all components are installed and cables are managed, carefully reattach the tempered glass panels.

4. Nga Tohutohu Whakahaere

4.1 Te Whakakaha

After completing the installation, connect your monitor, keyboard, mouse, and power cable to the PSU. Press the power button located on the top I/O panel of the case to start your system.

4.2 ARGB Mana Mana

The Elysium II comes with pre-installed ARGB fans and two Galaxy II fan control boxes. You can control the lighting effects and fan speeds using the included remote control. Refer to the Galaxy II fan control box manual for detailed instructions on changing modes, colors, and brightness. The reset button on the top I/O panel may also cycle through ARGB modes if connected to the controller's reset header.

4.3 Ngā Tauranga I/O o Mua

The top I/O panel provides convenient access to:

• Putanga USB Momo-C mō ngā taputapu hou.
• USB 3.0 ports for high-speed data transfer.
• USB 2.0 port for general peripherals.
• HD Audio Jack for headphones and microphones.
• Reset button for system restart.

5. Tiaki

Mā te tiaki auau ka roa te ora me te mahi tino pai o ngā wāhanga o tō rorohiko.

• Tātari Puehu: The Elysium II case is equipped with removable dust filters. Periodically remove and clean these filters (e.g., with compressed air or by washing with water and drying thoroughly) to prevent dust buildup inside the case, which can impede airflow and cooling.
• Horoi o waho: Whakamahia he ngohengohe, damp cloth to wipe down the exterior surfaces, including the tempered glass panels. Avoid abrasive cleaners or solvents that could damage the finish.
• Horoi o Roto: With the system powered off and unplugged, use compressed air to remove dust from internal components, especially fan blades and heatsinks.

6. Te Raru

If you encounter issues with your PC case, consider the following common problems and solutions:

• Kore Mana:
  • Me whakarite kei te hono tika te PSU ki te putanga pakitara, ā, kei te tūranga 'ON' te pana hiko o te PSU.
  • Me manatoko kei te hono tika te taura hiko ATX 24-pin me te taura hiko CPU 8-pin ki te papahoahoa.
  • Tirohia mēnā kei te hono tika te taura pātene mana o te papa o mua ki te pane o te papa o mua o te papa.
• Fans Not Spinning / RGB Not Lighting Up:
  • Confirm that all fans are properly connected to the fan control boxes.
  • Ensure the fan control boxes are receiving power from the PSU (usually via SATA power connector).
  • Check that the ARGB cables from the control boxes are connected to the motherboard's ARGB header (if applicable) or that the remote control is functioning and has fresh batteries.
• Front USB Ports Not Working:
  • Verify that the USB 3.0, USB 2.0, and USB Type-C cables from the front panel are securely connected to the corresponding headers on your motherboard.
• No Audio from Front Jack:
  • Me mohio kei te hono tika te taura Ororongo HD mai i te papa o mua ki te pane oro i runga i to papahoahoa.

For persistent issues, consult the Xigmatek support webpae, whakapā atu ranei ki te ratonga kiritaki.

7. Pūtāhui me te Tautoko

Xigmatek products are manufactured to high quality standards. For warranty information and technical support, please refer to the warranty card included with your product or visit the official Xigmatek webpae. Puritia to tohu hoko mo nga kereme whakamana.