GODIYMODULES RM 2-Way Crossover Instruction Manual

Kupu Whakataki

This manual provides detailed instructions for the installation, operation, and maintenance of your GODIYMODULES RM 2-Way Crossover. This device is designed to separate audio signals into high and low frequencies, optimizing sound distribution to your speakers for improved audio clarity and performance in both home and car audio systems.

Ka mutu te huaview

The GODIYMODULES RM 2-Way Crossover is a passive audio filter that enhances sound quality by directing specific frequency ranges to appropriate speaker drivers. Key features include:

• Precise Frequency Distribution: Ensures accurate separation of high and low frequencies for optimal sound.
• Tautuhinga Whakaritea: Features four-speed adjustable high and low-frequency settings to fine-tune audio output.
• Te Whakarei Ake o te Mahi Ororongo: Delivers pure treble and strong, powerful bass.
• Taupānga Whānui: Suitable for both home audio setups and car audio systems.

Image: Two GODIYMODULES RM 2-Way Crossover units, showing their compact design and connection terminals.

Tatūnga me te Tāuta

Proper installation is essential for optimal performance. Follow these steps to connect your 2-Way Crossover:

1. Tautuhia nga Kapeka: Each crossover unit has clearly marked input and output terminals. Look for "IN" (Input), "高音" (Treble/Tweeter), and "低音" (Bass/Woofer).
2. Tūhono Pūtake Ororongo: Connect the audio output from your amplifier or head unit to the "IN" terminals on the crossover. Ensure correct polarity (+ to + and - to -).
3. Connect Tweeter: Connect your tweeter speaker to the terminals marked "高音".
4. Connect Woofer: Connect your woofer speaker to the terminals marked "低音".
5. Adjust Frequency Settings: The crossover features adjustable settings for high and low frequencies. These adjustments are typically made via jumpers or switches on the board. Refer to the circuit diagram for specific adjustment points (J1, J2).

Image: Connection diagram for the GODIYMODULES RM 2-Way Crossover. It illustrates where to connect the speaker input, tweeter, and woofer, along with locations for bass boost and treble enhancement patch cables.

Hiranga: Always ensure your audio system is powered off before making any connections to prevent damage to the crossover or your speakers.

Nga Tohutohu Whakahaere

The GODIYMODULES RM 2-Way Crossover is a passive component and does not require active power. Its primary operation involves signal filtering. The "four-speed adjustable high and low" feature refers to the ability to modify the crossover points for treble and bass frequencies. This is typically achieved by adjusting jumpers or small switches on the circuit board (e.g., J1 and J2 as indicated in diagrams).

• Whakaritenga Auautanga: Experiment with the jumper settings to find the optimal balance between your tweeters and woofers. Different settings will shift the crossover frequency, affecting which frequencies are sent to each speaker.
• Whakamātautau Whakarongo: After each adjustment, listen to your audio system to evaluate the sound quality. Adjust until the sound is clear, balanced, and free from distortion.
• Bass Boost/Treble Enhancement: If available, utilize the designated patch cable points (as shown in the connection diagram) to further fine-tune bass or treble response.

Image: Circuit diagram of the crossover. This diagram illustrates the internal electronic components and their connections, including the bass inductor (L) and various capacitors (C1, C2, C3), along with adjustment points J1 and J2. The default inductance for L is 4.7uH.

Te tiaki

The GODIYMODULES RM 2-Way Crossover requires minimal maintenance. Follow these guidelines to ensure its longevity:

• Pupuri Ma: Regularly wipe the unit with a dry, soft cloth to remove dust. Avoid using liquid cleaners or solvents.
• Aukati i te makuku: Protect the crossover from water and excessive humidity, as it is not waterproof.
• Whakahau Tika: Ensure the unit is installed in a location with adequate airflow to prevent overheating, although passive crossovers generate minimal heat.
• Hononga Haumaru: Periodically check all wire connections to ensure they are secure and free from corrosion.

Raparongoā

If you encounter issues with your crossover, consider the following troubleshooting steps:

• Kāore he Oro mai i te Kaikōrero:
  • Check all connections to ensure they are secure and correctly wired to the "IN", "高音", and "低音" terminals.
  • Verify the speaker itself is functioning by connecting it directly to an audio source (if safe to do so).
  • Whakaritea te polarity tika.
• Oro korikori:
  • Review tou amplifier's output levels. Overdriving the speakers can cause distortion.
  • Check the crossover's frequency adjustment settings (jumpers J1, J2). Incorrect settings can lead to frequency overlap or gaps, causing unnatural sound.
  • Ensure the speakers are rated for the power output of your ampkaikawe
• Unbalanced Sound (e.g., too much bass, too little treble):
  • Adjust the crossover's frequency settings.
  • Confirm that the correct speakers are connected to the appropriate high-frequency (tweeter) and low-frequency (woofer) outputs.

Ki te mau tonu ngā raruraru i muri i te whakamātau i ēnei mahi, whakapā atu ki tētahi tohunga hangarau oro.

Whakatakotoranga

Image: Dimensional drawing of the crossover board. This diagram provides precise measurements of the unit, indicating a length of 40mm and a width of 27.5mm for the main board area.

Pūtāhui me te Tautoko

This GODIYMODULES product comes with a Rarangi Whakaiti. The specific terms and duration of the warranty may vary. Please retain your proof of purchase for warranty claims.

For technical support or warranty inquiries, please contact the seller or refer to the purchase platform for contact information. Ensure you have your product model (RM) and purchase details available when seeking support.