1. Kupu Whakataki
Kei roto i tēnei pukapuka ngā tohutohu matua mō te whakamahinga haumaru me te whai hua o tō Mīhini Whakairo Reiti Muka Monport 30W, Tauira GM-30. Kua hangaia tēnei mīhini tohu reiti muka iti kua whakauruhia mō te whakairo me te tohu tika i runga i ngā rauemi whakarewa me ngā rauemi kore-whakarewa. Pānuihia tēnei pukapuka i mua i te whakahaere i te taputapu kia tika ai te tatūnga, te whakahaere, me te tiaki.
2. Nga korero haumaru
WHAKATŪPATO: He taputapu reihi Akomanga 4 tēnei hua. Ka taea e te pānga tika ki te hihi reihi te whara kino i ngā kanohi me te wera o te kiri. Me mau tonu ngā mōhiti haumaru reihi e tika ana i te wā e whakahaere ana i te mīhini. Kaua rawa e titiro tika ki te hihi reihi, kaua hoki e tuku i ētahi atu kia titiro pērā.
- Me whakarite kia pai te hauhautanga o te wāhi mahi hei whakakore i ngā paoa e puta mai ana i te wā e whakairo ana.
- Puritia ngā rauemi mura kia matara atu i te wāhi mahi laser.
- Kaua e whakahaerehia te mīhini mēnā kua tangohia ētahi taupoki, kua karohia rānei ngā raka haumaru.
- Me momotu te hiko i mua i te mahi i te tiaki, i te horoi rānei.
- Te aroturuki i te mīhini i te wā e mahi ana.
- Kia mohio koe ki nga tikanga whakamutu ohorere.
3. Hua Neke Atuview
He taputapu iti, kaha hoki te Mīhini Whakairo Reiti Muka Monport 30W (Tauira GM-30) mō te tohu tino tika. Kei roto he pūtake reiti muka 30W me te roa o te ora tae atu ki te 100,000 hāora, ka taea te whakairo i ngā momo konganuku me ētahi mea ehara i te konganuku.
Āhuatanga matua:
- Hoahoa Iti Whakauru: Kiato me te mama mo te whakanohonga maha.
- Te Tohu Tere-Tiketike: Ka eke ki te tere tae atu ki te 10,000 mm/s mā te whakamahi i te pūnaha galvanometer ritenga.
- Whakairo Tika: He 0.01mm te tika o te whakairo me te whakaata mara F-theta.
- Te Wāhi Mahi Tino Pai: Mā te wāhi tohu 150mm x 150mm (5.9" x 5.9") ka rite te kounga whakairo puta noa i te mata.
- Rauemi Hototahi: He pai mō te whakairo i ngā konganuku katoa (koura, hiriwa, parahi, maitai kore waikura, parahi, titanium, konumohe, platinum) me ētahi kirihou.
- Hototahi Pūmanawa: E tautoko ana i te LightBurn, ā, kei roto hoki ko te pūmanawa BSLcad kore utu.
- Te Whakairo me te Tapahi Hōhonu: Ka taea te whakairo whakarewa 2.5D, te whakairo whakarewa hōhonu, me ētahi tapahi pepa whakarewa.
- Tohu Ira Whero: Āwhina ki te whakanoho i te wāhi whakairo.
Pikitia 1: Mīhini Whakairo Reiti Muka Monport 30W, Tauira GM-30. E whakaatu ana tēnei whakaahua i te waeine whakairo reiti katoa, e whakaatu ana i tōna hoahoa kiato me te whakauru.
Whakaatu 2: Neke Atuview Ko ētahi o ngā āhuatanga matua ko te tere tohu mōrahi 10000mm/s, te hototahi ki ngā pūmanawa LightBurn/BSLcad, te mana muka taiaho 30W, te horahanga tohu 150x150mm, te tika o raro-micron, te hototahi whānui o ngā rauemi, me ngā āheinga whakairo/tapahi 3D whakarewa.
Pikitia 3: E whakaatu ana tēnei whakaahua i ngā āhuatanga ā-tinana (370mm x 300mm x 550mm), te taumaha o te hua (15.5kg/34lbs), te roanga o te mahi e tumanakohia ana (100,000 hr), te pūmanawa hototahi (LightBurn, BSLcad), ngā pūnaha whakahaere hototahi (Windows, macOS), te tere whakairo mōrahi (10000mm/s), me te teitei-Z mōrahi (350mm).
Pikitia 4: Whakaahua e whakaatu ana i te tere whakairo teitei tae atu ki te 10,000 mm/s, e whakaatu ana i te whai huatanga o te taiaho muka Monport ki te whakataurite ki ētahi atu pūnaha.
Pikitia 5: Whakaaturanga tirohanga o te tino tika o te ira 0.01mm, e whakaatuhia anaasinte kaha o te mīhini ki te whakaatu mārama i ngā taipitopito uaua i roto i ngā whakairo.
Pikitia 6: Whakaahua o ngā rauemi rerekē e hototahi ana ki te muka taiaho Monport, tae atu ki te maitai kore waikura, te konumohe, te parahi, te hiriwa, te kirihou, te konukawata, te taitaniuma, me te koura.
4. Tatūnga
4.1 Te Wetewete me te Tirotiro
- Tangohia marietia te mīhini whakairo taiaho me ngā taputapu katoa i roto i te takai.
- Tirohia te mīhini mō ngā tohu pakaru i te wā e tukuna ana. Whakapā atu ki te ratonga tautoko a Monport tonu mēnā ka kitea he pakaru.
- Manatokohia kei te wātea ngā wāhanga katoa e whakaurua ana: te Kaituhi Muka Taiaho, te taura hiko, te puku USB (kei roto ko ngā pūmanawa me ngā tawhā), me ngā taputapu kua tonoa.
4.2 Tatūnga Tinana
- Whakatakotoria te mīhini whakairo ki runga i tētahi mata pūmau, papatahi hoki, i roto i tētahi wāhi e pai ana te hau.
- Me whakarite kia rawaka te wāhi huri noa i te mīhini hei whakahaere me te tohatoha wera.
- Tūhonohia te taura hiko ki te mihini katahi ka ki te putanga hiko kua mau ki te whenua.
- Honoa te miihini ki to rorohiko ma te whakamahi i te taura USB kua whakaratohia.
4.3 Tāuta Pūmanawa
He hototahi te Monport 30W Fiber Laser Engraver ki te LightBurn, ā, kei roto hoki he pūmanawa BSLcad i runga i te puku USB kua whakaratohia.
- Kōkuhua te puku USB ki tō rorohiko.
- Tāutahia te pūmanawa BSLcad mā te whai i ngā tohutohu kei runga i te puku USB. Kei roto hoki i tēnei puku ngā tawhā tārua.
- Ki te whakamahi koe i te LightBurn, tikiake mai, ka tāuta i te putanga hou mai i te paetukutuku LightBurn mana. webpae. Whāia te aratohu tatūnga a LightBurn mō te hono atu ki tētahi muka taiaho.
5. Nga Tohutohu Whakahaere
5.1 Rerenga Mahi Taketake
- Whakahiko: Whakakāhia te pana hiko matua o te mīhini whakairo.
- Whakarewa Pūmanawa: Whakatuwheratia te pūmanawa kua whiriwhiria e koe (LightBurn, BSLcad rānei) i runga i tō rorohiko.
- Te Waihanga Hoahoa/Kawemai: Waihangahia tō hoahoa, kawemai rānei i tētahi hoahoa kua oti kē te hanga file ki te rorohiko.
- Te Whakanoho Rawa: Whakatakotoria te rauemi hei whakairo ki runga i te papa mahi.
- Whakatikatika Arotahi: Whakatikatikahia te teitei o te tuaka-Z kia tika ai te arotahi. Ka āwhina te tohu ira whero ki te kimi i te pūwāhi arotahi. Kia mahara ki te tango i te taupoki arotahi mēnā kei reira.
- Tautuhinga Tawhā: Whakatakotoria ngā tawhā taiaho e tika ana (te mana, te tere, te auau, ngā pānga) i runga i te rauemi me te pānga e hiahiatia ana. Tirohia ngā aratohu whakamātautau rauemi mō ngā tautuhinga tino pai.
- Tāpare: Whakamahia te mahi anga a te pūmanawa hei whakariteview te wāhi whakairo i runga i tō rauemi. Mā te tohu ira whero e whakaatu te wāhi mahi.
- Tīmata te whakairo: Kia tika te whakatūpato haumaru, mauria he mōhiti tiaki, kātahi ka tīmata i te tukanga whakairo mai i te pūmanawa.
Pikitia 7: Whakaahua o te wāhi tohu tino pai 150mm x 150mm. E whakaatu ana tēnei whakaahua kua hangaia tēnei wāhi motuhake mō te kounga whakairo ōrite, kia kore ai e hē te ahua o ngā taha.
5.2 Te Whakairo me te Tapahi Hōhonu
Ka taea e te muka taiaho 30W te whakairo hōhonu me te tapahi i ētahi konganuku. Mō ngā hua hōhonu ake, mō te tukatuka tere ake rānei, me hiahia pea ngā tautuhinga mana teitei ake me ngā haerenga maha. Mō ngā hua kaha ake, tere ake hoki i roto i te whakairo hōhonu, i te tapahi rānei, e taunakihia ana he mīhini mana 50W, neke atu rānei.
5.3 Te whakamahi i nga taputapu
Ka taea e ngā taputapu whiriwhiri pēnei i te tuaka hurihuri, te pouaka tiaki, te mīhini tango paowa rānei te whakarei ake i ngā āheinga me te haumaru o te mīhini. Tirohia te pukapuka ā-ringa mō ngā tohutohu tāutanga me te whakahaere.
Pikitia 8: Whakaaturanga o ngā taputapu e wātea ana tae atu ki te tuaka hurihuri mō ngā mea porotaka, he pouaka tiaki hei whakarei ake i te haumaru, me te mīhini tango paoa hei whakahaere i te kounga o te hau.
6. Tiaki
- Whakapai Arotahi: Tirohia me te horoi i te karāhe F-theta me te matapihi tiaki i ia wā mā te whakamahi i te wai horoi karāhe me ngā tauera motuhake hei pupuri i te mahi tino pai o te taiaho.
- Whakapai Whānui: Puritia te mīhini kia kore he puehu, he paru rānei. Whakamahia he kakahu ngohengohe, maroke hei muru i ngā mata o waho.
- Whakahau: Me whakarite kia kaua e āraia ngā pūaha hau o te mīhini hei ārai i te wera nui.
- Whakahōu Pūmanawa: Kia whakahoutia tonutia tō pūmanawa whakairo ki te putanga hou rawa atu mō te mahi tino pai me te hototahi.
7. Te Raru
- Kāore he Putanga Taiaho:
- Tirohia mēnā kei te whakakā te mīhini, ā, kei te hono hoki ki te rorohiko.
- Me manatoko kei te mau te pātene aukati ohorere.
- Me whakarite kei te hono tika te pūmanawa ki te mīhini, ā, kua whakahohea hoki te taiaho.
- Whakaūtia kua tangohia te taupoki arotahi mai i te pane taiaho.
- He Rawe te Kounga Whakairo:
- Tirohia te arotahi. Ko te arotahi hē tētahi o ngā tino take o te pōuri, te ngoikore rānei o ngā whakairo.
- Whakatikatikahia ngā tawhā taiaho (mana, tere, auau) mō te rauemi motuhake.
- Horoia te karāhe F-theta me te matapihi tiaki mō tētahi puehu, he toenga rānei.
- Me whakarite kia papatahi te rauemi, kia mau hoki te whakanoho ki runga i te papa mahi.
- Ngā Take Hononga Pūmanawa:
- Tīmataria anō te mīhini me te rorohiko.
- Tirohia te hononga taura USB. Whakamātauria tētahi atu tauranga USB, taura rānei.
- Me whakarite kua tāutahia ngā taraiwa tika mō te mīhini.
- Kāore e kitea/tika te Tohu Ira Whero:
- Manatokohia kua whakahohea te tohu ira whero i roto i te pūmanawa.
- Mena kāore te ira whero e hāngai ana ki te ara taiaho, me whakatikatika anō pea (tirohia ngā tautuhinga pūmanawa matatau, te tautoko rānei a Monport).
8. Whakatakotoranga
| Āhuahira | Whakatakotoranga |
|---|---|
| Waitohu | Monport |
| Tau tauira | GM-30 (YXF30) |
| Te Mana Taiaho | 30W (Mana tino kaha tae atu ki te 8 kW) |
| Karaehe Taiaho | akomanga 4 |
| Max. Tere whakairo | 10,000 mm/s (393.7 ips) |
| Te Tika o te Whakairo | 0.01 mm |
| Wāhanga Mahi | 150mm x 150mm (5.9" x 5.9") |
| Teitei Z-Mōrahi | 350mm |
| Te ora | Tae atu ki te 100,000 haora |
| Pūmanawa Hototahi | LightBurn, BSLcad |
| Pūnaha Whakahaere Hototahi | Matapihi, macOS |
| Rauemi | Konumohe |
| Taumaha Hua | 15.5 kg (34 lbs) |
| Nga Waahanga kei roto | Fibre Laser Engraver |
9. Pūtāhui me te Tautoko
Mō ngā mōhiohio pūtāhui, tirohia ngā tuhinga kua tāpirihia mai i tō hoko, tirohia rānei te paetukutuku mana o Monport webpae. Mō te tautoko hangarau, te āwhina rapurongoā, ngā pātai rānei e pā ana ki ngā wāhanga whakakapinga, whakapā atu ki te ratonga kiritaki a Monport.
Kaupapa Whakahoki: He tikanga whakahoki/whakakapinga 30-rā te roa e tukuna ana. Tirohia ngā taipitopito o tō hoko mō ngā tikanga motuhake.
Toa Monport: Tirohia te Toa Monport i runga i a Amazon
