AIYIMA T5 V2.0 AmpAwhina Kaiwhakamahi lifier

1. Kupu Whakataki

The AIYIMA T5 V2.0 is a versatile 2-channel Bluetooth 5.1 amplifier designed to enhance your home audio experience. It integrates a high-performance Class D amplifier chip (TDA7498E) with 6K4 vacuum tubes, offering a blend of modern efficiency and classic audio warmth. This amplifier supports multiple input modes, including Bluetooth 5.1 and RCA, and features a dedicated 6.35mm headphone output. It is engineered to deliver powerful, clear, and low-distortion sound for passive speakers.

2. Hua Neke Atuview

2.1 Nga Mana me nga Tohu Paewhiri o mua

This image shows the front panel of the AIYIMA T5 V2.0 amplifier, highlighting key components such as the Bluetooth antenna, 6K4 vacuum tubes, VU meter, volume control, power switch, Bluetooth indicator, RCA1 indicator, RCA2 indicator, and 6.35mm headphone output.

• Antenna Nihokikorangi: For wireless Bluetooth signal reception.
• Ngongo 6K4 * 2: Replaceable vacuum tubes for audio pre-ampwhakarangatira.
• Mita VU: Visual indicator of audio signal level.
• Total Vol (Volume Control): Rotary knob to adjust the overall output volume. Turn left for Vol-, right for Vol+.
• Power Switch / Mode Switch: Long press to turn the unit on or off. Short press to switch between input modes (Bluetooth, RCA1, RCA2).
• Tohu Nihokikorangi: Illuminates when Bluetooth input is selected and active.
• RCA1 Indicator: Illuminates when RCA1 input is selected.
• RCA2 Indicator: Illuminates when RCA2 input is selected.
• 6.35mm Putanga Waeaoro: Connects to headphones for private listening.

2.2 Hononga Paewhiri Whakamuri

This image illustrates the rear panel connections of the AIYIMA T5 V2.0 amplifier, including RCA inputs (RCA1, RCA2), Pre-Out, Speaker Output terminals, and the DC power input. It also shows how various devices like phones, tablets, laptops, PCs, DVDs, and TVs can connect via RCA or Bluetooth.

• RCA Audio Input (RCA1, RCA2): Connect external audio sources such as CD players, DACs, or other devices via RCA cables.
• Tuhinga o mua: Connects to another power amplifier, active speakers, or an active subwoofer to expand your audio system (e.g., for 2.1 or multi-channel setups).
• Putanga Kaikōrero: Connects to passive speakers using banana plugs or bare wire. Tuhipoka: Tenei amplifier is designed for passive speakers only, not active speakers.
• Tāuru Mana (DC18-36V): Connect the provided power adapter here. Ensure the correct voltage whakamahia ana.

3. Tohutohu Tatūnga

1. Tūhono Kaikōrero: Connect your passive speakers to the Speaker Output terminals on the rear panel. Ensure correct polarity (+ to + and - to -) for each channel.
2. Honoa nga Puna Ororongo:
   • RCA Tāuru: Connect your audio source (e.g., CD player, TV, PC) to either the RCA1 or RCA2 input jacks using RCA cables.
   • Whakauru Nihokikorangi: Me whakarite kia mau te hononga o te pūihi Nihokikorangi ki te papa o muri.
3. Connect Pre-Out (Optional): If you wish to connect an additional amplifier, active speakers, or an active subwoofer, use an RCA cable to connect the Pre-Out on the T5 V2.0 to the input of your external device.
4. Hono Hono: Connect the provided power adapter to the DC18-36V power input on the rear panel, then plug the adapter into a wall outlet.
5. Hiko Tuatahi: Long press the Power/Mode switch on the front panel to turn on the amplifier. The VU meter will activate, and the tubes will begin to glow.

4. Nga Tohutohu Whakahaere

4.1 Te Hiko / Weto me te Kōwhiringa Aratau

• Whakahiko: Long press the Power/Mode switch.
• Weto Whakakore: Long press the Power/Mode switch again.
• Switch Input Mode: Short press the Power/Mode switch to cycle through Bluetooth, RCA1, and RCA2 inputs. The corresponding indicator light on the front panel will illuminate.

4.2 Mana Rōrahi

Rotate the 'Total Vol' knob clockwise to increase the volume and counter-clockwise to decrease it. Adjust to a comfortable listening level.

4.3 Takirua Nihokikorangi

1. Me whakarite te amplifier is powered on and the Bluetooth indicator is lit (short press the Power/Mode switch until the Bluetooth indicator is active).
2. On your mobile device (phone, tablet, computer), open the Bluetooth settings.
3. Rapua available devices and select "AIYIMA T5 V2.0" to pair.
4. Once paired, the Bluetooth indicator will remain steadily lit, and you can play audio from your device through the ampkaikawe

A visual representation of the QCC3034 Bluetooth 5.1 chip, indicating support for AAC, SBC, Qualcomm aptX, aptX HD, and aptX Low Latency codecs, ensuring high-quality wireless audio.

4.4 Te Whakamahinga o te Paneoro

This image shows the AIYIMA T5 V2.0 amplifier in use, with headphones connected to the 6.35mm output, demonstrating its function as a headphone amplifier alongside a laptop.

Plug your 6.35mm headphones into the Headphone Output jack on the front panel. The amplifier will automatically switch audio output to the headphones, muting the speaker output.

5. Tiaki

5.1 Te horoi

Horoia te amplifier's exterior with a soft, dry cloth. Avoid using liquid cleaners or abrasive materials, as they may damage the finish or internal components.

5.2 Whakakapinga Ngongo

This image provides a close-up of the glowing 6K4 vacuum tubes, highlighting the pluggable design which allows for tube replacement with compatible types like 6J1, 6J2, GE5654, 6J3, 6J4, 6J5, 6AK5.

The 6K4 vacuum tubes are pluggable and can be replaced. If a tube fails or you wish to experiment with different sound characteristics, ensure the amplifier is powered off and unplugged before carefully removing and replacing the tubes. Compatible tube types include 6J1, 6J2, GE5654, 6J3, 6J4, 6J5, and 6AK5.

6. Te Raru

• Kore Oro:
  • Tirohia mehemea te amplifier is powered on and the correct input mode is selected.
  • Verify all cable connections (speakers, audio source, power) are secure.
  • Ensure the volume knob is not set to minimum.
  • If using headphones, ensure they are fully plugged in; unplug them to restore speaker output.
  • Confirm speakers are passive and correctly connected.
• Nga Take Hononga Nihokikorangi:
  • Me whakarite te ampKei te aratau Nihokikorangi te kaiwhakaora.
  • Whakawetohia me te Nihokikorangi i runga i to taputapu puna.
  • Delete "AIYIMA T5 V2.0" from your device's Bluetooth list and try pairing again.
  • Ensure no other devices are currently connected to the ampwhakaea mā Nihokikorangi.
• Oro korikori:
  • Whakaitihia te oro i ngā mea e rua ampwhakakoi me te puna ororongo.
  • Tirohia te hototahitanga o te aukati o te kaikorero.
  • Ensure audio cables are not damaged or poorly connected.
  • Whakamātauria ki tētahi atu pūtake oro.
• Power Indicator Not On:
  • Tirohia mēnā kei te hono tika te urutau hiko ki ngā mea e rua ampte whakakakahu me te putanga taiepa.
  • Verify the wall outlet is functioning.
  • Ensure the power adapter is the correct voltage (DC18-36V).

7. Whakatakotoranga

A view of the internal high-quality components of the AIYIMA T5 V2.0 ampwhakarara, whakaatucasing the NE5532 Op Amp Chip, QCC3034 Bluetooth Chip, OMRON Relay, TDA7498E Amp Chip, Ruby Capacitor, and Siemens Capacitor, emphasizing the build quality.

8. Pūtāhui me te Tautoko

For warranty information, technical support, or service inquiries, please contact AIYIMA customer support through their official channels or the retailer from whom the product was purchased. Please retain your proof of purchase for any warranty claims.