AeroCool ViewPukapuka Kaiwhakamahi mō te Pouaka Rorohiko Mini-G V1

1. Kupu Whakataki

This manual provides detailed instructions for the installation, operation, and maintenance of your AeroCool Viewport Mini-G V1 PC Case. Please read this manual thoroughly before beginning assembly to ensure proper setup and to maximize the lifespan of your components.

The AeroCool Viewport Mini-G V1 is a micro ATX panoramic housing designed for compact yet powerful PC builds. It features tempered glass panels and pre-installed FRGB fans for effective cooling and aesthetic appeal.

2. Hua Neke Atuview me nga ahuatanga

Ko te Viewport Mini-G V1 offers a spacious interior within a compact micro ATX form factor. Key features include:

• Panoramic Design: Two screwless tempered glass panels on the front and left side provide a clear view o nga waahanga o roto.
• Pre-installed Cooling: Three 120mm Fixed RGB (FRGB) fans are included: two at the front and one at the rear for immediate cooling capability.
• Kōwhiringa Rokiroki: Features two decoupled hard drive attachments for flexible storage installation.
• Hononga: Includes a USB Type-C connection on the top panel for modern peripheral support.
• Ahu Kiato: Measuring 212 x 437 x 377.5 mm, it is suitable for smaller setups.

Whakaahua 2.1: Mua-maui view of the AeroCool Viewport Mini-G V1 PC Case, showcasing the tempered glass panels and pre-installed FRGB fans.

Whakaahua 2.2: Mua view of the PC case, highlighting the two 120mm FRGB intake fans.

Figure 2.3: Interior side view, showing the motherboard tray area and cable management cutouts.

Whakaahua 2.4: Whakamuri view of the PC case, displaying the I/O shield cutout, expansion slots, and the pre-installed 120mm FRGB exhaust fan.

Whakaahua 2.5: Roto view from the front, showing the two pre-installed FRGB fans and the spacious main chamber.

Pikitia 2.6: Paewhiri o runga view, illustrating the ventilation mesh and front I/O ports including USB 3.0 and USB Type-C.

3. Tatūnga me te Tāuta Wae

Before installing components, ensure you have a clean, static-free workspace. Refer to your component manuals for specific installation details.

3.1. Te whakarite i te keehi

1. Tango Paewhiri Taha: The tempered glass side panel and front panel are secured with screwless clips. Gently unclip and remove them to access the interior. Handle glass panels with care to prevent damage.
2. Pouaka Apatoko: Kimihia te pouaka taputapu i roto i te pouaka, kei roto ngā tīwiri, ngā here reti, me ētahi atu taputapu whakairi.

3.2. Whakauranga Papa Matua

1. Tāutahia te whakangungu I/O ki roto i te pūaha o muri o te pouaka.
2. Align your Micro ATX motherboard with the standoffs inside the case. Ensure all standoffs match the motherboard's mounting holes.
3. Whakamaua te papahoahoa mā te whakamahi i ngā tīwiri kua whakaratohia. Kaua e whakakī rawa.

3.3. Te Waenga Whakawhiwhi Hiko (PSU).

1. The PSU mounts at the rear of the case, typically in the bottom shroud area.
2. Slide the PSU into its designated bay and secure it with screws from the rear of the case.

3.4. Tāutanga Puku Rokiroki

The case supports two decoupled hard drive attachments. Refer to the case diagram for specific mounting locations for 2.5" SSDs and 3.5" HDDs.

1. Mount 2.5" SSDs to the designated trays or mounting points behind the motherboard tray.
2. Install 3.5" HDDs into the drive cage, usually located under the PSU shroud.
3. Secure drives with the appropriate screws.

3.5. Graphics Card and Expansion Cards

1. Tangohia ngā taupoki mokowā whakawhānui e tika ana mai i te tuarongo o te pouaka.
2. Insert your graphics card or other expansion cards into the PCIe slots on your motherboard.
3. Whakauhia ngā kāri ki ngā tīwiri.

3.6. Whakahaerenga Taura

Whakamahia nga tapahi ararere taura me nga tohu here ki muri i te paepae papahoa hei whakahaere i nga taura. Ma tenei ka pai ake te rere o te hau me te rerehua.

3.7. Te Hononga i ngā Taura I/O o Mua

Connect the front panel cables (Power SW, Reset SW, HDD LED, Power LED, USB 3.0, USB Type-C, HD Audio) to the corresponding headers on your motherboard. Refer to your motherboard manual for header locations.

4. Nga Tohutohu Whakahaere

Once all components are installed and cables are connected:

1. Ensure all power cables are securely connected to the PSU and components.
2. Tūhonohia tō mata, papapātuhi, kiore me ētahi atu taputapu tāpiri.
3. Plug the power cord into the PSU and a wall outlet.
4. Hurihia te whakakā hiko i runga i te PSU ki te tūnga 'ON'.
5. Press the power button on the top panel of the case to start your system. The pre-installed FRGB fans will illuminate and begin spinning.

5. Tiaki

Ko te tiaki i nga wa katoa ka awhina i te mahi tino pai me te roa o nga waahanga PC.

• Whakapai puehu: Periodically clean dust filters (if present) and the interior of the case using compressed air or a soft brush. Dust accumulation can hinder airflow and cooling performance.
• Whakapaipai Hiko: Gently clean the fan blades of the pre-installed FRGB fans to remove dust. Ensure fans are not spinning during cleaning.
• Horoi o waho: Wipe the exterior surfaces, including tempered glass panels, with a soft, damp kakahu. A ape i nga kai horoi abrasive.

6. Te Raru

Mena ka pa ki a koe nga raru, whakaarohia nga mahi rapurongoā noa e whai ake nei:

• Kāore te Pūnaha i te Hiko:
  • Check if the PSU power switch is in the 'ON' position.
  • Verify all power cables (24-pin ATX, 8-pin CPU, PCIe) are securely connected to the motherboard and components.
  • Me whakarite kei te hono tika te taura pātene mana o te papa o mua ki te pane o te papahoahoa.
• Kāore ngā Pā e Hurihuri/Kāore he RGB:
  • Confirm fan power cables are properly connected to the motherboard or fan controller.
  • The pre-installed FRGB fans have fixed RGB lighting and do not offer customizable colors.
• Kore Putanga Whakaatu:
  • Ensure your monitor is connected to the graphics card (not the motherboard I/O, unless using integrated graphics).
  • Tautuhi anō i te kāri whakairoiro me ngā kōwae RAM.

Mō ngā take uaua ake, tirohia ō pukapuka ā-wāhanga, rapua rānei he āwhina ngaio.

7. Whakatakotoranga

8. Pūtāhui me te Tautoko

Mō ngā mōhiohio pūtāhui me te tautoko hangarau, tirohia te paetukutuku mana o AeroCool webpaetukutuku, whakapā atu ranei ki to kaihokohoko o to rohe. Puritia to tohu hoko mo nga kereme whakamana.