1. Kupu Whakataki
This user manual provides essential information for the safe and effective operation of your Monport 50W Fiber Laser Engraver, Model YXF50. This integrated mini fiber laser marking machine is designed for high-precision engraving and marking on various metal and non-metal materials. Please read this manual thoroughly before initial use to ensure proper setup, operation, and maintenance.
Figure 1.1: Monport 50W Fiber Laser Engraver, Model YXF50.
2. Nga korero haumaru
WARNING: This is a Class 4 laser product. Direct exposure to the laser beam can cause severe eye and skin damage. Always follow safety precautions.
2.1 Nga Aratohu Haumaru Whanui
- Parenga kanohi: Always wear certified laser safety glasses appropriate for the laser's wavelength (1064nm) when the machine is in operation.
- Parenga kiri: A ape i te rongo tika o te kiri ki te kurupae laser.
- Whakahau: Ensure adequate ventilation in the work area to remove fumes and particles generated during engraving. Consider a fume extractor.
- Haumaru ahi: Keep a fire extinguisher nearby. Do not engrave flammable materials without proper precautions.
- Tirohanga: Kaua rawa e waiho te miihini kia kore e tiakina i te wa e mahi ana.
- Kaimahi Whaimana: Only trained and authorized personnel should operate the laser engraver.
- Kati ohorere: Kia mohio koe ki te waahi me te mahi o te paatene whakamutu ohorere.
2.2 Haumaru Hiko
- Me whakarite kia noho tika te miihini.
- Kaua e mahi ma nga ringa makuku, i roto ranei i te damp tikanga.
- Momotuhia te hiko i mua i te mahi tiaki, whakatikatika ranei.
3. Tatūnga me te Tāuta
The Monport 50W Fiber Laser Engraver is designed for straightforward setup. Follow these steps to prepare your machine for operation.
3.1 Te Wetewete me te Tirotiro
- Kia ata tangohia nga waahanga katoa mai i te kete.
- Inspect the machine for any signs of damage during transit. Report any damage to Monport support immediately.
- Me manatoko kei te wātea ngā taputapu katoa kua whakarārangihia ki te rārangi tākai.
3.2 Huihuinga
The integrated design minimizes assembly. Typically, this involves securing the laser head column to the base unit.
- Place the base unit on a stable, level surface.
- Attach the vertical column with the laser head to the designated mounting points on the base. Secure it firmly using the provided screws.
- Connect any necessary cables (power, USB) as indicated in the quick start guide included with your machine.
Figure 3.1: Compact design and key specifications of the Monport 50W Fiber Laser Engraver.
3.3 Tāuta Pūmanawa
Your Monport 50W Fiber Laser Engraver is compatible with LightBurn and BSLcad software. Installation files and backup parameters are typically provided on a USB drive included in the packaging.
- Whakauruhia te puku USB kua whakaratohia ki to rorohiko.
- Follow the instructions on the USB drive to install your preferred software (LightBurn or BSLcad).
- Install the necessary drivers for the laser engraver to communicate with your computer.
- Configure the software according to the provided parameters for your specific machine model (YXF50).
4. Nga Tohutohu Whakahaere
This section outlines the basic steps for operating your Monport 50W Fiber Laser Engraver.
4.1 Powering On and Initial Checks
- Me whakarite kia whakatakotoria ngā mahi ārai katoa, tae atu ki te mau i ngā mōhiti haumaru taiaho.
- Connect the power cable and turn on the main power switch on the machine.
- Launch the engraving software (LightBurn or BSLcad) on your computer.
- Verify that the software recognizes the laser engraver.
4.2 Material Placement and Focusing
- Place your material on the work platform.
- Adjust the Z-axis (height of the laser head) until the laser is properly focused on the material surface. The machine features a red dot pointer to assist with focusing and positioning.
- Hiranga: Remember to remove the lens cap before operation.
Figure 4.1: Optimal marking area of 150x150mm for the 50W fiber laser.
4.3 Software Operation and Engraving
- Kawemai, waihangahia ranei to hoahoa i roto i te rorohiko.
- Set engraving parameters such as power, speed (up to 10000mm/s), frequency, and passes based on the material and desired effect.
- Whakamahia te mahi anga a te pūmanawa hei whakariteview the engraving area on your material.
- Initiate the engraving process. Monitor the machine closely during operation.
Whakaatu 4.2: Neke Atuview of key features including 10000mm/s speed and 50W power.
Figure 4.3: Illustration of the 0.01mm ultra-fine spot precision.
4.4 Compatible Materials
The Monport 50W Fiber Laser Engraver is suitable for marking and engraving a wide range of materials:
- Nga konganuku: Gold, Silver, Copper, Stainless Steel, Brass, Titanium, Aluminum, Platinum, etc.
- Kirihou: Certain types of plastics.
- Ētahi atu: Some ceramics, leather, painted metals.
Whakaahua 4.4: Examples of materials compatible with the fiber laser engraver.
5. Tiaki
Regular maintenance ensures optimal performance and extends the lifespan of your Monport 50W Fiber Laser Engraver.
5.1 Te horoi i te Arotahi
The F-theta field lens is a critical component. Keep it clean to maintain engraving quality.
- Auautanga: Clean the lens regularly, especially if you notice a decrease in engraving quality or power.
- Tikanga: Use a specialized lens cleaning solution and lint-free wipes. Avoid touching the lens surface with bare hands.
5.2 Whakapai Whanui
- Keep the work area and the machine's exterior free of dust and debris.
- Kia tino mohio kei aukatia ngā mata o te hau.
5.3 Whakahōu Pūmanawa
Periodically check for software updates for LightBurn or BSLcad to benefit from new features and performance improvements.
6. Te Raru
Ko tenei waahanga e aro ana ki nga take noa e pa ana ki a koe me te whakarato otinga pea.
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Kaore he putanga laser | Lens cap still on, emergency stop engaged, power issue, software not connected. | Remove lens cap, disengage emergency stop, check power connections, verify software connection. |
| He kino te kounga o te whakairo | Incorrect focus, dirty lens, incorrect power/speed settings, material not suitable. | Adjust focus, clean lens, optimize engraving parameters, ensure material compatibility. |
| Machine not recognized by software | USB cable issue, driver not installed, software configuration error. | Check USB cable, reinstall drivers, verify software settings. |
| Red dot pointer not visible | Pointer disabled in software, hardware malfunction. | Enable pointer in software settings. If issue persists, contact support. |
7. Whakatakotoranga
Key technical specifications for the Monport 50W Fiber Laser Engraver (Model YXF50):
- Tauira: YXF50
- Momo Taiaho: Taiaho muka
- Mana Taiaho: 50W (50000 mW output power)
- Karaehe Taiaho: akomanga 4
- Max. Tere Tohu: 10000 mm/s
- Tikanga Whakairo: 0.01mm
- Wāhanga Mahi: 150mm x 150mm (5.9" x 5.9")
- Max Z-Height: 350mm
- Roa ora: Tae atu ki te 100,000 haora
- Pūmanawa Hototahi: LightBurn, BSLcad
- Pūnaha Whakahaere Hototahi: Matapihi, macOS
- Taumaha Hua: 14.5 kg (34 lbs)
- Rauemi: Konumohe
- Tae: Kerei
- Aratau Mahi: ā-ringa
Figure 7.1: Speed capabilities of the Monport 50W Fiber Laser Engraver.
8. Pūtāhui me te Tautoko
8.1 Nga Korero Whakaputanga
For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official Monport webpae. Puritia to tohu hoko mo nga kereme whakamana.
8.2 Tautoko Kiritaki
If you encounter any issues not covered in this manual or require technical assistance, please contact Monport customer support. You can find contact information on the official Monport webpae, na roto ranei i to turanga hoko.
Monport Direct: Nga korero Kaihoko
Figure 8.1: Optional accessories for enhanced functionality and safety.
