Pukapuka Tohutohu mō te Kaikōrero Woofer Iti 2-inihi 8ohm 5W Whānui katoa a AIYIMA

1. Kupu Whakataki

This instruction manual provides essential information for the proper installation, operation, and maintenance of your AIYIMA 2-inch 8ohm 5W Full Range Mini Woofer Speaker. Please read this manual thoroughly before use to ensure optimal performance and longevity of the product. Retain this manual for future reference.

2. Hua Neke Atuview

2.1 Nga waahanga

• Compact 2-inch full-range design for versatile audio applications.
• Rated at 5W power output with 8 Ohm impedance.
• Designed for easy installation with appropriate accessories.
• Hanga roa mo te mahi pono.

2.2 Ihirangi mokete

• 2 x AIYIMA 2-inch 8ohm 5W Full Range Mini Woofer Speakers

Whakaahua 1: Mua me muri view of the AIYIMA 2-inch 8ohm 5W Full Range Mini Woofer Speakers.

3. Whakatakotoranga

Figure 2: Detailed dimensions of the speaker for installation planning.

4. Tatūnga me te Tāuta

Follow these steps for proper installation of your speakers:

1. Whakaritenga: Whakaritehia to ororongo amplifier or source is turned off and disconnected from power before beginning installation. Gather necessary tools such as a screwdriver, wire strippers, and mounting hardware (not included unless specified).
2. Tauwāhi Whakapuru: Choose a suitable location for mounting the speakers. Refer to Figure 2 for speaker dimensions to ensure proper fit. The speakers are designed for flush mounting.
3. Waea waea:
   • Identify the positive (+) and negative (-) terminals on the back of each speaker. These are typically marked.
   • Honoa te tauranga pai (+) o te kaikorero ki te putanga pai (+) o to ampkaikawe
   • Tūhonohia te kāpeka tōraro (-) o te kaikōrero ki te putanga tōraro (-) o tō ampkaikawe
   • Me whakarite kia mau nga hononga katoa me te kore he ara iahiko poto.
4. Te whakamarumaru i nga Kaikorero: Use appropriate screws (not included) to secure the speakers into their mounting holes. The screw hole diagonal dimension is 60 mm. Do not overtighten screws, as this may damage the speaker frame.
5. Taki Whakamutunga: Double-check all connections and mounting security before proceeding to operation.

Whakaahua 3: Whakamuri view of the speaker showing wiring terminals.

5. Nga Tohutohu Whakahaere

Once the speakers are properly installed and wired:

1. Connect your audio amplifier or source to power.
2. Hurihia to ampkaiwhakarewa me te puna ororongo.
3. Tīmata te purei ororongo i te taumata oro iti.
4. Gradually increase the volume to your desired listening level. Avoid excessively high volumes that may cause distortion or damage to the speakers.

6. Tiaki

Hei whakarite i te roa o te wā me te mahi tino pai o ō kaikorero, whai i ēnei aratohu tiaki:

• Te horoi: Gently wipe the speaker cones and frames with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
• Taiao: Avoid exposing the speakers to extreme temperatures, direct sunlight, high humidity, or moisture.
• Tukino Tinana: Protect the speaker cones from punctures or tears. Avoid placing heavy objects on the speakers.
• Waea waea: Periodically check wiring connections for looseness or corrosion. Re-secure or clean as necessary.

7. Te Raru

Mena ka pāngia koe e ngā raruraru me ō pūorooro, tirohia ngā raruraru me ngā otinga e whai ake nei:

8. Pūtāhui me te Tautoko

Mō ngā mōhiohio pūtāhui me te tautoko hangarau, tirohia ngā tuhinga i whakaratohia i te wā hoko, whakapā atu rānei ki tō kaihokohoko. Tērā pea ka rerekē ngā tikanga pūtāhui motuhake i runga i te rohe me te kaihoko.