LILYGO T-BeamSUPREME ESP32-S3 UBLOX M10S GPS LoRa Development Board User Manual

1. Kupu Whakataki

The LILYGO T-BeamSUPREME is a versatile development board designed for long-range communication and GPS tracking. It integrates an ESP32-S3FN8 dual-core LX7 microprocessor, a LoRa SX1262 module for 915MHz communication, and a UBLOX M10S GPS module for precise positioning. The board also features a 1.3-inch SH1106 OLED display for information output. This manual provides essential instructions for setting up, operating, and maintaining your LILYGO T-BeamSUPREME development board.

Āhuatanga matua:

MCU: ESP32-S3FN8 Dual-core LX7 microprocessor
LoRa Module: SX1262 (915MHz)
GPS Kōwae: UBLOX M10S
Whakaatu: 1.3-inch SH1106 OLED
Pre-burning LILYGO factory firmware

2. Tatūnga

Before using your LILYGO T-BeamSUPREME, ensure all necessary components are properly connected and the firmware is loaded.

2.1 Huihuinga Tinana

Carefully connect the antenna to the LoRa module's SMA connector. Ensure a secure connection to optimize signal transmission and reception.

**Whakaahua 1:** Kati-ake view of the LILYGO T-BeamSUPREME showing the antenna connection point. Ensure the antenna is securely fastened to the SMA connector.

2.2 Firmware Installation

The LILYGO T-BeamSUPREME comes with LILYGO factory firmware pre-burned. If you need to update or change the firmware, follow the instructions provided by LILYGO or the Meshtastic project.

For detailed instructions on flashing Meshtastic firmware, refer to the official Meshtastic documentation or the following video:

Ataata 1: How to Install Meshtastic to LILYGO T-Echo. This video demonstrates the firmware installation process, which is similar for the T-BeamSUPREME.

2.3 Case Assembly (Optional)

If you are using a protective case, follow the manufacturer's instructions for assembly. Ensure all components fit correctly and connections are not strained.

Ataata 2: N30 Protective Case for ESP32 LoRa V3 Board Antenna Battery. This video shows the assembly of a protective case, which can provide guidance for similar cases for the T-BeamSUPREME.

3. Nga Tohutohu Whakahaere

The LILYGO T-BeamSUPREME is designed for various applications, including mesh networking and GPS tracking. This section covers basic operation.

3.1 Kei te Hiko / Weto

Connect a compatible battery or USB-C power source to the board. The OLED display should light up, indicating the device is powered on. To power off, disconnect the power source.

3.2 Meshtastic Application Usage

For mesh communication, install the Meshtastic application on your smartphone (Android/iOS). Connect your T-BeamSUPREME via Bluetooth to the app to send/receive messages, view device status, and manage channels.

Ataata 3: How to Install Meshtastic to LILYGO T-Echo. This video also demonstrates basic Meshtastic app usage for sending messages and viewing devices, applicable to the T-BeamSUPREME.

3.3 GPS Mahi

The integrated UBLOX M10S GPS module provides location data. This data can be viewed on the OLED display or through the Meshtastic app, depending on the firmware configuration.

4. Tiaki

To ensure the longevity and optimal performance of your LILYGO T-BeamSUPREME, follow these maintenance guidelines:

Kia maroke te taputapu me te makuku.
A ape i te tuku i te taputapu ki nga wera nui.
Handle the board with care to prevent physical damage.
Regularly check for firmware updates to benefit from new features and bug fixes.

5. Te Raru

If you encounter issues with your LILYGO T-BeamSUPREME, consider the following troubleshooting steps:

Kaore te taputapu i te hiko: Check battery connection and charge level. Ensure the USB-C cable is functional if powering via USB.
No LoRa communication: Verify antenna connection. Ensure both devices are on the same frequency band and have compatible firmware.
Kāore te GPS e whiwhi tohu: Me mohio kei te marama te taputapu view of the sky. Allow sufficient time for initial satellite acquisition.
Nga take hononga Nihokikorangi: Restart both the T-BeamSUPREME and your smartphone. Ensure the Meshtastic app has necessary permissions.
Firmware issues: Re-flash the firmware following the official instructions.

6. Whakatakotoranga

Detailed technical specifications for the LILYGO T-BeamSUPREME (RM-T-BeamSUPREME):

Āhuahira	Taipitopito
Waitohu	LILYGO
Rangatū	T-BeamSUPREME
Tauira Tuemi	RM-T-BeamSUPREME
MCU	ESP32-S3FN8 Dual-core LX7 microprocessor
Kōwae LoRa	SX1262 (915MHz)
GPS Kōwae	UBLOX M10S
Whakaatu	1.3-inch SH1106 OLED
RAM	LPDDR4
Momo Ahokore	Radio Frequency (LoRa), Wi-Fi
Pūnaha Mahi	Linux (compatible)
Waitohu Tukatuka	Korewharewha
Te maha o nga Tukatuka	2

7. Pūtāhui me te Tautoko

For any questions, suggestions, or technical support regarding your LILYGO T-BeamSUPREME, please feel free to contact LILYGO directly. You can also visit the official LILYGO Store on Amazon for more information and products.

LILYGO Store: Visit the LILYGO Store

GitHub Repository: For source code and further development information, visit github.com/Xinyuan-LilyGO/LilyGo-LoRa-Series.

	LILYGO T-BEAM-S3 Aratohu Kaiwhakamahi: Tatūnga me te Whanaketanga Ko tenei aratohu kaiwhakamahi e whakarato ana i nga tohutohu matawhānui mo te whakarite i te papa whanaketanga LILYGO T-BEAM-S3. Akohia me pehea te whirihora i te taiao rorohiko ma te whakamahi i te Arduino IDE, te hono i te poari, me te whakamahi i ona kaha Wi-Fi, BLE, GPS, me te LoRa mo nga kaupapa IoT.
	LILYGO T-WATCH S3 Aratohu Kaiwhakamahi: Tatūnga me te Whanaketanga me Arduino Ako ki te whakawhanake i nga tono IoT me te LILYGO T-WATCH S3. Ko tenei aratohu e hipoki ana i te whakatuu i te Arduino IDE, i te whakamahere i te ESP32-S3, me te whakamahi i nga whakahau SSC, i whakaratohia e Xinyuan.
	LILYGO T-Deck ESP32-S3 Aratohu Kaiwhakamahi mo Arduino Development He aratohu kaiwhakamahi matawhānui mo te poari whanaketanga LILYGO T-Deck, e whakaatu ana i te tatūnga o te Arduino IDE, te whirihoranga ESP32-S3, te mahi Wi-Fi me te LoRa, me te tohutoro whakahau SSC mo nga tono IoT.
	LILYGO T-Whakaatu-S3 Aratohu Kaiwhakamahi He aratohu kaiwhakamahi mo te poari whanaketanga LILYGO T-Display-S3, e hipoki ana i te tatūnga, te whakamahi Arduino IDE, me nga whakahau Wi-Fi taketake.
	LILYGO T3-S3 Aratohu Kaiwhakamahi He aratohu kaiwhakamahi mo te poari whanaketanga LILYGO T3-S3, e hipoki ana i te tatūnga o te Arduino IDE, te whirihoranga, te whakamatautau, me te tohutoro whakahau Wi-Fi mo te waahanga ESP32-S3.
	LILYGO T-Display-S3 Pro ESP32-S3 Development Board User Guide Comprehensive user guide for the LILYGO T-Display-S3 Pro ESP32-S3 development board. Covers setup of the Arduino IDE, software installation, configuration, connecting the board, and a reference for common Wi-Fi SSC commands.

LILYGO RM-T-BeamSUPREME