Kupu Whakataki
Thank you for choosing the WOLFBOX MF100. This comprehensive device combines a powerful electric air duster and a robust 3000A jump starter with an integrated air compressor. Designed for versatility, it provides solutions for cleaning electronics, inflating tires, and jump-starting vehicles. Please read this manual thoroughly before operation to ensure safe and efficient use.
He aha kei roto i te Pouaka?
Upon opening the package, verify that all components are present and in good condition. The standard package includes:
- WOLFBOX 3000A Jump Starter with Air Compressor
- WOLFBOX MF100 Hiko Air Puehu
- Tauira Pepeke Maamaa
- USB-C Uira Whakatau
- Air Nozzles for Air Compressor (various types)
- Air Duster Nozzles (5 types)
- Cleaning Brushes for Air Duster (2 types)
- Puhi Rokiroki
- Pukapuka Kaiwhakamahi
Tatūnga
Peke Starter & Air Compressor
- Akona Tuatahi: Before first use, fully charge the jump starter unit using the provided USB-C cable. The display will indicate charging status.
- Hononga Apatoko: For air compression, connect the air hose to the designated port on the unit. Select and attach the appropriate nozzle for your inflation needs (e.g., tire valve, ball needle).
Huri Huri Hiko
- Āpitihanga pupuha: Select the desired nozzle or brush for your cleaning task. Align the nozzle with the air outlet of the duster and push firmly until it clicks into place.
- Kei te utu: Ensure the air duster is charged before use. Connect it to a USB power source using its charging cable.
Nga Tohutohu Whakahaere
Using the 3000A Jump Starter
- Hono Clamps: Ensure the jump starter is off. Connect the red clamp to the positive (+) terminal of the vehicle's dead battery and the black clamp ki te tauranga kino (-).
- Connect to Jump Starter: Plug the smart jumper cable connector into the jump starter's port.
- Tīmata Waka: Once connected, turn on the jump starter. The display will show readiness. Attempt to start your vehicle. If it doesn't start immediately, wait 30 seconds before trying again.
- Momotu: After the vehicle starts, disconnect the smart jumper cable from the jump starter first, then remove the black clamp, whai muri ko te cl wheroamp mai i te pākahiko.
Using the 160PSI Air Compressor
- Hononga ngongo: Attach the air hose to the tire valve or item to be inflated.
- Tautuhi Peehanga: Turn on the unit. Use the controls to set the desired pressure (PSI, BAR, KPA). The current pressure will be displayed.
- Tīmata te pikinga: Press the inflation button to begin. The compressor will automatically stop once the preset pressure is reached.
- Momotu: Remove the air hose from the item.
Using the Electric Air Duster
- Whakahiko: Press and hold the power button to turn on the duster.
- Whakarite Tere: Briefly press the power button to cycle through the 3 available speed settings (40,000 RPM, 80,000 RPM, 150,000 RPM).
- Rererangi Totika: Aim the nozzle at the area to be cleaned. Use short bursts for delicate items or continuous airflow for larger areas.
- Weto Whakakore: Press and hold the power button to turn off the duster.
Taumahinga Power Bank
The jump starter unit also functions as a power bank. Connect your devices (phones, tablets, etc.) to the USB-C (65W) or USB-A (12W/18W) ports for charging. The 160W DC continuous output can power other compatible devices.
Te tiaki
- Te horoi: Wipe both units with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners. Ensure no moisture enters the ports.
- Tiaki Pūhiko: For optimal battery life, fully charge both the jump starter and air duster every 3-6 months, even if not in use. Avoid storing in extreme temperatures.
- Rokiroki: Store the units and accessories in the provided storage case in a cool, dry place, away from direct sunlight and moisture.
Raparongoā
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Jump Starter not turning on/charging. | He iti te pākahiko; he hapa te taura/urunga utu. | Charge the unit fully. Try a different USB-C cable and power adapter. |
| Vehicle not starting with jump starter. | hē clamp connection; battery too deeply discharged; vehicle issue. | Me whakarite clamps are connected correctly (red to +, black to -). Ensure jump starter is fully charged. Consult a mechanic if vehicle issues persist. |
| Air Compressor not inflating. | Hose not securely connected; incorrect pressure setting; low unit battery. | Check hose connection. Verify pressure setting. Charge the unit. |
| Electric Air Duster not blowing. | Low battery; nozzle blockage. | Charge the duster. Check for and clear any obstructions in the nozzle or air intake. |
Whakatakotoranga
- WOLFBOX MF100 Electric Air Duster:
- RPM Morahi: 150,000 RPM
- Max Wind Speed: 45 m/s
- Speed Settings: 3 (40,000 RPM, 80,000 RPM, 150,000 RPM)
- Nozzles: 5 types
- Brushes: 2 types
- Taumaha: Tata ki te 0.66 lbs (0.3 kg)
- Dimensions: L6.2*W1.6*H2.4 inches (L16*W4*H6 cm)
- WOLFBOX 3000A Jump Starter with Air Compressor:
- Peak Naianei: 3000A
- Pūhiko Raukaha: 16000mAh
- Engine Compatibility: Up to 8L Gas / 6L Diesel
- Air Compressor Pressure: 160 PSI (Max)
- Airflow Rate: 45 liters per minute
- Charging Ports: USB-C 65W, USB-A 12W/18W
- DC Output: 160W continuous
Pūtāhui me te Tautoko
WOLFBOX products are designed for reliability and performance. For any questions, technical assistance, or warranty claims, please contact WOLFBOX customer support. Refer to the product packaging or the official WOLFBOX webpae mo nga korero whakapā o naianei.
Webpae: www.wolfbox.com
