Kupu Whakataki
This manual provides essential information for the safe and efficient use of your Edifier ES20 Portable Bluetooth Speaker. Please read it thoroughly before operating the device.
The Edifier ES20 is a compact and powerful portable Bluetooth speaker designed for both indoor and outdoor use. It features IP67 dustproof and waterproof rating, up to 15 hours of playtime, Bluetooth V5.4 connectivity, and an ambient light system.
He aha kei roto i te Pouaka
Manatokohia ko nga mea katoa kei raro nei kei roto i to kete:
- Edifier ES20 Speaker x 1
- Te here x 1
- USB-C ki te USB-C Cable x 1
- Arataki Tere Tere x 1
- Ngā Tohutohu Haumaru Hira x 1
Image: Contents of the Edifier ES20 package.
Tatūnga
Te Hiko / Whakaweto
To power on or off the speaker, press and hold the power button located on the top panel for approximately 1.5 seconds. The indicator lights will illuminate or turn off accordingly.
If the speaker is not charging and remains inactive for 30 minutes (no audio playback or user operation), it will automatically power off. This feature can be disabled via the EDIFIER ConneX app under "My Device" > "Power saving mode".
Video: Demonstrates powering the Edifier ES20 speaker on and off, and disabling power saving mode via the app. (Relevant segment: 0:17 - 0:42)
Hononga Nihokikorangi
The ES20 speaker supports connecting to two Bluetooth devices simultaneously.
Connecting One Device
- When the speaker is powered on, it automatically enters Bluetooth pairing mode, indicated by a blinking blue light.
- On your device (smartphone, tablet, etc.), enable Bluetooth and select "EDIFIER ES20" from the list of available devices.
- Kia honoa, ka huri te rama tohu ki te kikorangi mārō.
- To disconnect from the current device, press and hold the "+" and "-" buttons simultaneously for 1.5 seconds.
The speaker will automatically reconnect to the last connected device when powered on again.
Te hono i nga taputapu e rua i te wa kotahi
- First, connect your primary device (Device A) to the speaker as described above.
- Then, press and hold the "+" and "-" buttons on the speaker for 1.5 seconds to enter pairing mode again.
- On your second device (Device B), select "EDIFIER ES20" from the Bluetooth list. The indicator will turn solid blue once connected.
- To play audio from Device B, pause playback on Device A. The speaker will automatically switch to Device B.
- To connect a different Bluetooth device, first disconnect the current device by pressing and holding the "+" and "-" buttons on the speaker for 1.5 seconds, then reconnect from your new device's Bluetooth list.
Video: Demonstrates Bluetooth connection for single and multiple devices. (Relevant segment: 0:43 - 2:18)
Bluetooth Stereo Pairing (TWS)
You can pair two ES20 speakers together for a true wireless stereo (TWS) sound experience.
- Ensure both ES20 speakers are powered on and not connected to any other Bluetooth devices.
- On the first ES20 speaker, double-press the POWER button. The white indicator will pulse slowly. This speaker will become the master (right channel).
- On the second ES20 speaker, double-press the POWER button as well. It will also start pulsing. This speaker will become the slave (left channel).
- Once paired, the indicator on the slave speaker will turn off, while the master's indicator will turn solid white.
- Connect your device to the master speaker via Bluetooth. You can then control playback from the master speaker.
- To exit stereo mode, double-press the POWER button on either the master or the slave speaker.
Image: Two Edifier ES20 speakers ready for stereo pairing.
Video: Demonstrates Bluetooth stereo pairing between two ES20 speakers. (Relevant segment: 2:19 - 3:23)
Nga Tohutohu Whakahaere
Mana purei
- Whakaritea Rōrahi: Press the "+" or "-" button.
- Hūpeke Riu: Press and hold the "+" button for the next track, or the "-" button for the previous track.
- Whakamutua/Tīmata anō te purei: Press the POWER button once.
Image: Intuitive controls on the top panel of the ES20 speaker.
Video: Demonstrates playback controls including volume adjustment and track skipping. (Relevant segment: 3:23 - 3:44)
Ma te Maama Ambient
The ES20 features an ambient light system with multiple modes:
- Press the LIGHT EFFECT button (sun icon) to switch between different light modes (Breathing, Rainbow, Static, Glittering and Colorful, Emergency Light).
- To enable/disable emergency lighting, double-press the LIGHT EFFECT button.
- To turn off the lights completely, press and hold the LIGHT EFFECT button for 1.5 seconds.
Image: Ambient Light System with various effects.
Video: Demonstrates how to use the ambient light feature. (Relevant segment: 3:44 - 4:05)
Te whakamahi i te hopuoro
The ES20 has a built-in MEMS microphone for hands-free calling. When connected to your phone via Bluetooth:
- Whakautu Waea: Press the POWER button once.
- Whakairi: Patohia ano te paatene POWER.
- Whakakahoretia he Waea: Patohia me te pupuri i te paatene POWER.
Image: Built-in MEMS Microphone for calls.
Video: Explains how to use the microphone for calls. (Relevant segment: 4:05 - 4:23)
Using the EDIFIER ConneX App
For advanced features and customization, download the EDIFIER ConneX app. Connect your device to the speaker via Bluetooth, then open the app.
Ka taea e te taupānga te:
- Control playback and volume.
- Switch sound effects (Music, Game, Movie, Outdoor).
- Customize light effects.
- Whakapai ake i te firmware.
- Access user manual and other settings.
Image: EDIFIER ConneX App interface.
Video: Demonstrates how to use the EDIFIER ConneX app for various functions. (Relevant segment: 4:23 - 5:06)
Te utu i te Kai-korero
The ES20 speaker is equipped with a built-in Lithium Ion battery, providing up to 15 hours of continuous playtime on a single charge.
- Connect the included USB-C to USB-C cable to the charging port on the side of the speaker.
- Connect the other end of the cable to a USB power adapter (5V/2A output recommended).
- The battery indicator lights on the top panel will show the charging status.
- When fully charged, the battery indicator will turn solid white.
Image: Top panel controls and battery indicators.
Video: Demonstrates how to charge the ES20 speaker. (Relevant segment: 5:06 - 5:20)
Using the Strap
The ES20 comes with a strap for easy carrying and portability. Attach the strap to the designated loop on the side of the speaker.
Image: Edifier ES20 with attached strap for portability.
Video: Shows how to attach and use the carrying strap. (Relevant segment: 5:20 - 5:28)
Te tiaki
- Te horoi: Whakamahia he kakahu ngohengohe, maroke hei horoi i te korero. Kaua e whakamahi i nga kai horoi me nga whakarewa.
- Puranga wai: The speaker is IP67 rated, meaning it is dustproof and can be submerged in up to 1 meter (3 feet) of water for up to 30 minutes. Ensure the charging port cover is securely closed before exposing it to water. After water exposure, dry the speaker thoroughly before charging.
- Rokiroki: Whakaorangia te kaikorero ki te waahi hauhautanga, maroke atu i nga wera nui me te ra tika.
Image: Edifier ES20 demonstrating IP67 water resistance.
Raparongoā
| Raruraru | Rongoā |
|---|---|
| Karekau he tangi |
|
| Kaore e taea te hono ma te Nihokikorangi |
|
| He kino te kounga oro |
|
| Speaker automatically turns off |
|
Whakatakotoranga
| Āhuahira | Taipitopito |
|---|---|
| Ingoa Tauira | ES20 |
| Te Mana Putanga Tapeke | 6W (RMS) |
| Waeine Atekōkiri | 1.7'' (43mm) full-range driver, 2'' (55mm) passive bass radiator |
| Whakautu auau | 93Hz - 19kHz |
| Tohu Waitohu-ki-Toi | ≥ 85dB (A) |
| Putanga Nihokikorangi | V5.4 |
| Kotēkē Ororongo | SBC |
| Ora Pūhiko | Tae atu ki te 15 haora |
| Te Atete Wai/Puehu | IP67 |
| Ahu (W × H × D) | 90.4mm × 93.7mm × 49.7mm (3.55"D x 3.68"W x 1.95"H) |
| Taumaha Kupenga | 326g (1.01 pauna) |
| Rauemi | Kirihou |
Image: Detailed specifications of the ES20 speaker.
wheketere Tautuhi
If you encounter persistent issues or wish to clear all settings, you can reset the speaker to its factory defaults:
- Press and hold the "+" and "-" buttons on the speaker simultaneously for 5 seconds.
- Alternatively, open the EDIFIER ConneX app, go to "My Device" > "Factory settings" and confirm the reset.
Video: Demonstrates how to perform a factory reset on the ES20 speaker. (Relevant segment: 5:28 - 5:51)
Pūtāhui me te Tautoko
The Edifier ES20 Portable Bluetooth Speaker comes with a Limited Warranty. Please refer to the included "Warranty Card" for detailed terms and conditions.
For further assistance, technical support, or warranty claims, please visit the official Edifier webpaetukutuku, whakapā atu ranei ki ta raatau ratonga kaihoko.
- Whaimana Webpae: www.edifier.com
- Ngā Wāhanga kei roto: Kāri Pūtāhui
