Kupu Whakataki
Welcome to the AVENLI Inflatable Hot Tub Spa experience. This manual provides essential information for the safe and efficient operation, setup, and maintenance of your new hot tub. Please read this manual thoroughly before installation and use, and keep it for future reference.
Your AVENLI hot tub is designed for comfort and relaxation, featuring a stylish rattan design, a round shape, and the capacity to comfortably seat 4-6 people. It offers heating up to 1040F (400C) and 140 soothing water jets for a hydrotherapy experience. Equipped with a digital control panel, advanced heating and filtration systems, and safety features like overheating protection and a lockable cover, it provides an easy-to-use and secure spa solution. Its foldable design and included cover make it convenient to store and maintain.
Image: The AVENLI 4-6 Person Inflatable Hot Tub Spa, showcasing its round shape and rattan exterior, with the control unit attached.
Nga korero haumaru
Always prioritize safety when operating your hot tub. Failure to follow these instructions can result in serious injury or property damage.
- Do not exceed the maximum water temperature of 1040F (400C).
- Supervise children at all times when they are near or in the hot tub.
- Ensure the RCD/GFCI (4-6mA) circuit breaker is properly installed and tested before each use.
- Do not operate the hot tub if any part is damaged or malfunctioning.
- Avoid using electrical appliances near the hot tub.
- Always use the lockable cover when the hot tub is not in use to prevent accidental access and heat loss.
Image: Diagram illustrating the 5-layer protection system of the hot tub, including double insulation, over-heating protection, RCD/GFCI circuit breaker, control panel lock, and triple backflow-proof protection.
Nga waahanga kei roto
Before beginning assembly, ensure all components listed below are present and undamaged:
- Pupu Spa Inflatable
- Pump Unit (with digital control panel)
- Lockable Top Cover
- Inflatable Spa Lid
- Filter Cartridges (2)
- Ngongo Pupuhi
- Tapia Papaki
- Pump Unit Connectors
- Base Protector
- Takirere Rererangi
- Nga potae
- GFCI Mono
Image: A visual representation of all the complete hardware and accessories included with the hot tub, such as the repair patch, pump unit connectors, filter cartridges, base protector, airflow valve, top cover, inflatable spa lid, spa liner, inflating hose, caps, pump unit, and GFCI plug.
Tatūnga
Follow these steps for easy installation of your inflatable hot tub:
- Kōwhiria he Tauwāhi: Select a flat, stable, and level surface capable of supporting the weight of the filled hot tub (approximately 264 gallons / 1000 liters of water plus occupants). Ensure it is near a suitable electrical outlet with GFCI protection.
- Wewetehia ka Whakatakotoria: Carefully remove the hot tub and all components from the packaging. Spread the base protector on your chosen location.
- Whakapūpūhia te Spa: Connect the inflating hose to the pump unit and the hot tub's inflation valve. Use the pump unit to inflate the hot tub until it is firm to the touch but not over-inflated. Do not use an air compressor.
- Connect the Pump Unit: Attach the pump unit to the hot tub's inlet and outlet connections securely.
- Whakakiia ki te wai: Fill the hot tub with fresh water using a garden hose, ensuring the water level is between the minimum and maximum fill lines indicated inside the tub.
- Tāutahia te Kāri Tātari: Insert the filter cartridge into its housing within the hot tub.
Image: A collage demonstrating the easy installation process, including connecting the inflation hose to the pump unit and hot tub, inflating the tub, and filling it with water.
Te whakahaere
Your AVENLI hot tub features a user-friendly digital control panel for easy operation.
Paewhiri Mana Mamati
The digital control panel allows you to adjust temperature, activate the massage jets, and manage filtration settings with ease.
Whakaahua: He tata view of the digital control panel, showing buttons for power, temperature adjustment, filter, bubble jets, and a digital display for temperature.
- Pātene Hiko: Turns the hot tub system on or off.
- Te Whakarerekenga Pawera: Use the up/down arrows to set your desired water temperature (up to 1040F / 400C).
- Jet Button: Activates the 140 soothing water jets for a relaxing massage experience. Press again to turn off.
- Pātene Tātari: Controls the filtration system. It is recommended to run the filter regularly to maintain water quality.
- Pātene Maukati: Ka maukati i te paewhiri mana hei aukati i nga huringa ohorere.
- Pātene Waeine Pawera: Toggles between Celsius (0C) and Fahrenheit (0F).
Air Jet Massage
The hot tub features 140 air jets that provide a relaxing bubble massage. Simply press the jet button on the control panel to activate this feature.
Image: A woman relaxing in the hot tub, demonstrating the air jet massage feature with bubbles visible in the water.
Te tiaki
He mea nui te tiaki auau mō te roa me te akuaku o tō kaukau wera.
Pūnaha Tātari
The hot tub features a filtration system with 150 filter pleats capable of keeping dust, dirt, and other particles out. Regularly clean and replace the filter cartridges to ensure optimal water quality.
Image: Two white filter cartridges with blue tops, designed for the hot tub's filtration system.
- Tātari Tātari: Remove the filter cartridge and rinse it with a garden hose weekly.
- Whakakapi i nga Tātari: Replace filter cartridges every 1-2 months, or more frequently depending on usage and water quality.
Mahinga Wai
Maintain proper water chemistry using recommended hot tub chemicals (not included) to prevent algae growth and ensure sanitary conditions. Test water regularly.
Te whakamakuku me te rokiroki
When not in use for extended periods or for relocation, drain the hot tub completely using the easy drain valve. Clean and dry the tub thoroughly before folding and storing it in a cool, dry place.
Image: A collage showing the easy drain valve and the hot tub's foldable design for convenient storage.
Lockable Cover
Always use the included lockable cover when the hot tub is not in use. This helps maintain water temperature, keeps debris out, and prevents unauthorized access, enhancing safety.
Image: The AVENLI hot tub with its brown rattan-patterned lockable cover securely fastened, demonstrating its protective function.
Raparongoā
This section addresses common issues you might encounter with your hot tub.
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Kāore te kaukau wera e whakamahana | Low water level; Filter clogged; Heater malfunction; Temperature setting too low. | Check water level and refill; Clean or replace filter; Contact customer support; Increase temperature setting. |
| Kāore ngā waka rererangi e mahi ana | Air pump malfunction; Clogged jets; Control panel error. | Ensure pump is powered; Clean jet nozzles; Reset control panel or contact support. |
| Nga take o te kounga wai (kapua, kakariki) | Improper chemical balance; Dirty filter; Infrequent water changes. | Test and adjust water chemistry; Clean/replace filter; Drain and refill hot tub. |
| Te turuturu wai | Loose connections; Puncture in liner. | Tighten all connections; Locate and repair puncture with provided patch kit. |
Whakatakotoranga
| Āhuahira | Taipitopito |
|---|---|
| Waitohu | ĀWENĪ |
| Ingoa Tauira | Avenli Spa Rattan Nice |
| Tau tauira | 17286USV31DQ |
| Te kaha | 4-6 Tangata |
| Te Kaha Wai | 264 Kareti (1000 Rita) |
| Ahu (L x W x H) | 80.3" x 80.3" x 27.6" (204cm x 204cm x 70cm) |
| Taumaha Tūemi | 61.96 Pauna (28.1 kg) |
| Max. Te Pawera Whakawera | 1040F (400C) |
| Nga Reta Wai | 140 |
| Hanga | Porowhita |
| Tae | Paraone (Ratana) |
| Nga waahanga haumaru | Overheating Protection, Lockable Cover, RCD/GFCI (4-6mA) Circuit Breaker |
Image: A diagram illustrating the dimensions of the hot tub, showing a diameter of 80.3 inches (204 cm) and a height of 27.6 inches (70 cm).
Nga korero Whakaputanga
AVENLI products are manufactured to high-quality standards. This product comes with a limited warranty against manufacturing defects. Please refer to the warranty card included in your packaging for specific terms, conditions, and duration of coverage. Keep your proof of purchase for warranty claims.
Tautoko Kiritaki
For any questions, technical assistance, or warranty claims, please contact AVENLI customer support. Contact information can typically be found on the product packaging or on the official AVENLI website. Please have your model number (17286USV31DQ) and proof of purchase ready when contacting support.