RAB Lighting B17 LED Bollard Light Instruction Manual

1. Kupu Whakataki

This manual provides detailed instructions for the installation, operation, and maintenance of the RAB Lighting B17 LED Bollard Light. This outdoor luminaire features field-adjustable wattage and selectable color temperature (CCT), designed for various outdoor applications.

Ko nga ahuatanga matua ko:

• Energy-efficient LED with a 50,000-hour lifespan.
• Waata taea te whakaritetage: 24W, 19W, or 14W.
• Selectable CCT: 3000K (Warm White), 4000K (Neutral White), or 5000K (Cool White).
• 0-10V dimming capability.
• UL Kua Rarangihia mo nga waahi maku.
• Durable metal construction with a glass shade.

Figure 1: RAB Lighting B17 LED Bollard Light (Model B17D shown).

2. Nga korero haumaru

WHAKATŪPATO: Mōrearea o te ru hiko. Momotuhia te hiko i mua i te tāutanga, i te mahi rānei. Me mahi te tāutanga e te tohunga hiko whai tohu i runga anō i ngā ture hiko ā-motu me ā-rohe katoa e tika ana.

• Me whakarite te tuku voltage is correct for the fixture.
• Do not handle live components.
• Mau taputapu tiaki whaiaro (PPE) e tika ana.
• This fixture is suitable for wet locations. Ensure all connections are properly sealed to prevent water ingress.
• Kaua e whakarereketia te taputapu. Ka taea e nga whakarereketanga te whakakore i te raihana me te hanga morearea haumaru.

3. Ihirangi mokete

Manatokona kei te noho nga waahanga katoa i mua i te tiimata o te whakaurunga:

• B17 LED Bollard Light Fixture
• On-Off Switch (Included Components)
• Installation Hardware (e.g., mounting bolts, gaskets) - (Assumed, not explicitly listed but typical for such products)
• Pukapuka Tohutohu (tenei tuhinga)

4. Tatūnga me te Tāuta

Follow these steps for proper installation of the B17 LED Bollard Light:

1. Whakapaia te Pae Tāuta: Ensure the mounting surface is stable and level. Run electrical conduit and wiring to the desired location according to local codes.
2. Momotu Mana: Whakawetohia te hiko i te ara iahiko i mua i te tiimata i nga mahi hiko.
3. Mount the Bollard: Secure the bollard base to the mounting surface using appropriate hardware. Ensure a watertight seal if required by local codes.
4. Hanga Hononga Hiko: Connect the fixture's wires to the supply wires. Follow standard wiring practices:
   • Black to Line (L)
   • White to Neutral (N)
   • Green/Ground to Ground (G)
   • Purple to Dimming (+) (for 0-10V dimming)
   • Gray to Dimming (-) (for 0-10V dimming)
   Me whakarite kia mau nga hononga katoa me te whakamaarama.
5. Tīpakohia Wattage me CCT: Before closing the fixture, adjust the wattage and CCT switches located inside the fixture head. Refer to Section 5 for details.
6. Secure the Fixture Head: Attach the fixture head to the bollard body, ensuring all seals are properly seated to maintain the wet location rating.
7. Whakaora i te Mana: Turn on power at the circuit breaker and test the light.

Figure 2: The B17 Bollard Light is UL Listed and rated for wet locations, ensuring durability in outdoor environments.

5. Nga Tohutohu Whakahaere

5.1. Field-Adjustable Wattage

The B17 bollard light allows you to select the desired wattage output to optimize brightness and energy consumption. A switch located inside the fixture head enables selection between 24W, 19W, and 14W.

• 24W: Tirohanga teitei.
• 19W: Medium brightness, reduced energy use.
• 14W: Lower brightness, maximum energy savings.

Hei whakatika: Disconnect power. Open the fixture head. Locate the wattage selection switch and move it to the desired setting. Close the fixture head and restore power.

5.2. Selectable Color Temperature (CCT)

The fixture offers three color temperature options to suit different aesthetic preferences and applications. A separate switch inside the fixture head allows selection between 3000K, 4000K, and 5000K.

• 3000K: Warm White, ideal for creating a cozy and inviting atmosphere.
• 4000K: Neutral White, suitable for general illumination and task lighting.
• 5000K: Cool White, provides bright, crisp light, often used for security or modern aesthetics.

Hei whakatika: Disconnect power. Open the fixture head. Locate the CCT selection switch and move it to the desired setting. Close the fixture head and restore power.

Figure 3: Visual representation of adjustable wattage and selectable CCT settings.

5.3. Te Whakaiti i te Hiko 0-10V

The B17 bollard light is compatible with 0-10V dimming systems. Connect the purple and gray dimming wires to a compatible 0-10V dimmer control. This allows for smooth adjustment of light output from 100% down to 10% (or lower, depending on dimmer specifications).

Ensure the dimmer is rated for LED loads and is compatible with 0-10V dimming protocols.

6. Tiaki

The B17 LED Bollard Light is designed for minimal maintenance due to its long LED lifespan of 50,000 hours.

• Te horoi: Me horoi i ia wa te taha o waho o te taputapu ki te ngohengohe, damp cloth to remove dirt and debris. Do not use abrasive cleaners or solvents. Ensure power is off before cleaning.
• Tirotiro: Annually inspect the fixture for any signs of damage, loose connections, or wear. Ensure all seals remain intact to maintain weather resistance.
• Whakakapinga LED: LEDs are integrated and not user-replaceable. The long lifespan minimizes the need for replacement.

Figure 4: The B17 LED Bollard Light offers a long 50,000-hour operational lifespan.

7. Te Raru

8. Whakatakotoranga

9. Pūtāhui me te Tautoko

For warranty information and technical support, please contact RAB Lighting directly. Refer to the official RAB Lighting website or your purchase documentation for specific warranty terms and contact details.

RAB Lighting Contact: www.rablighting.com