Pukapuka Kaiwhakamahi mō te Pūnaha Pūhiko Sharkoon Rebel P10 850W ATX 3.1

1. Kupu Whakataki

This manual provides essential information for the safe and efficient use of your Sharkoon Rebel P10 850W ATX 3.1 Power Supply Unit (PSU). The Rebel P10 is designed to deliver reliable and efficient power to your personal computer, supporting the latest ATX 3.1 standard for compatibility with modern graphics cards. It features a quiet 120mm fan with a fluid dynamic bearing and flat cables to optimize airflow within your PC case.

2. Nga korero haumaru

Please read and understand all safety instructions before installing or operating the PSU. Failure to do so may result in personal injury or damage to your equipment.

• Pūmate Hiko: The PSU contains high voltage components. Do not open the PSU casing. Kaore he waahanga e taea ana e te kaiwhakamahi ki roto.
• Tāuta Ngaio: Installation should be performed by a qualified technician or experienced user.
• Whakahau: Ensure adequate ventilation around the PSU. Do not block the fan or ventilation openings.
• Taiao: Operate the PSU in a dry, well-ventilated environment, away from moisture, dust, and extreme temperatures.
• Whakapapa: Always connect the PSU to a grounded power outlet using the provided power cable.
• Weto Whakakore: Always disconnect the PSU from the mains power before performing any installation, maintenance, or troubleshooting.

3. Ihirangi mokete

Manatokona kei roto katoa nga mea kei roto i te kete:

• Sharkoon Rebel P10 850W ATX 3.1 Power Supply Unit
• Te Hiko AC
• Whakaeke Tiu
• Pukapuka Kaiwhakamahi (tenei tuhinga)

4. Tatūnga me te Tāuta

Follow these steps to install your Sharkoon Rebel P10 PSU into your computer system:

1. Whakaritehia to Pūnaha: Ensure your computer is completely powered off and disconnected from the wall outlet. Open your PC case to access the PSU mounting area.
2. Tango PSU Tawhito (mehemea e tika ana): Momotuhia nga taura katoa mai i to PSU tawhito ka tangohia mai i te keehi.
3. Whakanuia te PSU Hou: Carefully place the Sharkoon Rebel P10 into the designated PSU bay in your PC case. Secure it with the provided mounting screws. Ensure the fan faces the correct direction for optimal airflow (typically facing downwards if your case has a bottom vent, or inwards if it's a top-mounted PSU).
   

   Whakaahua: Matua view of the Sharkoon Rebel P10 850W Power Supply Unit. This image shows the primary casing and fan grill, illustrating the unit's compact design for easy installation into a PC chassis.
4. Tūhono Mana Papa Matua: Connect the 24-pin ATX power connector to your motherboard's 24-pin socket. Ensure it clicks securely into place.
5. Tūhono Mana PTM: Connect the 4+4-pin EPS/ATX12V connector(s) to your motherboard's CPU power socket(s).
6. Connect PCIe Power: For graphics cards, connect the appropriate PCIe power connectors (e.g., 6+2-pin) to your graphics card(s). The Rebel P10 supports ATX 3.1, ensuring compatibility with the latest generation of power-hungry GPUs.
   

   Image: A selection of flat cables included with the Sharkoon Rebel P10 850W Power Supply Unit. These flat cables are designed for improved cable management and better airflow within the computer case.

7. Connect Peripheral Power: Connect SATA power connectors to your SSDs, HDDs, and optical drives. Use Molex connectors for any other compatible peripherals. The flat cable design of the Rebel P10 aids in efficient cable routing and improved airflow.
8. Whakaha Uepu: Organize cables neatly to ensure proper airflow and a tidy build.
9. Katia te Pouaka ka Honoa te Mana AC: Close your PC case. Connect the AC power cable to the PSU's power inlet and then to a grounded wall outlet. Ensure the power switch on the PSU is in the 'OFF' position before connecting to the wall outlet.
   

   Whakaahua: Rear view of the Sharkoon Rebel P10 850W Power Supply Unit, showing the AC power input and the main power switch. This switch controls the power flow to the unit.

5. Nga Tohutohu Whakahaere

Once the PSU is installed and all connections are secure:

1. Whakahiko: Tahurihia te pana hiko kei muri o te PSU ki te tūranga 'ON'.
2. Whakaoho Punaha: Press the power button on your computer case to start your system.
3. Mahi Ataahua: The Rebel P10 features a 120mm fan with a fluid dynamic bearing, designed for quiet operation even under load.

6. Tiaki

Regular maintenance helps ensure the longevity and optimal performance of your PSU:

• Tango Puehu: Me horoi i ia wa te puehu mai i te mea powhiriwhiri a te PSU me nga karaehe whakamahana ma te whakamahi i te hau kōpeke. Me mohio kua whakawetohia te punaha me te wetewete i te mono i mua i te horoi.
• Taki Waea: Occasionally check that all power cables are securely connected and not obstructing airflow.
• Voltage: The Rebel P10 utilizes DC/DC technology for optimal and accurate voltage regulation, contributing to system stability.

7. Te Raru

If you encounter issues with your PSU, consider the following:

• Kore Mana:
  • Ensure the AC power cable is securely connected to both the PSU and the wall outlet.
  • Manatokohia te whakakā hiko kei muri o te PSU kei te 'ON' te tūnga.
  • Check the wall outlet by plugging in another device.
  • Ensure all internal power connectors (24-pin, CPU, PCIe) are firmly seated.
• Pūnaha Haukore/Tukinga:
  • Kia tino mohio kei neke ake te kaha o te mana e hiahiatia ana e tō pūnaha i te kaha 850W o te PSU.
  • Verify all components are correctly installed and receiving power.
  • The Rebel P10 includes comprehensive protection features (e.g., overcurrent, overload protection) to prevent damage in case of anomalies. If the PSU shuts down unexpectedly, it might be due to one of these protections activating.
• Haruru rereke:
  • Check for any cables or obstructions interfering with the PSU fan.
  • Ensure the PSU is securely mounted to prevent vibrations.

If problems persist, consult a qualified technician or contact Sharkoon support.

8. Whakatakotoranga

9. Pūtāhui me te Tautoko

Sharkoon products are manufactured to high quality standards and are covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Sharkoon webpae.

For technical support, troubleshooting assistance, or to inquire about replacement parts, please visit the official Sharkoon support page or contact their customer service department. Contact information can typically be found on the manufacturer's webpae:

www.sharkoon.com