Zalman CNPS9X Performa Plus ARGB CPU Cooler Instruction Manual

1. Kupu Whakataki

The Zalman CNPS9X Performa Plus ARGB CPU Cooler is designed to provide efficient thermal management for your processor. It features a 120mm PWM fan with Addressable RGB (ARGB) lighting, a premium aluminum heatsink, and copper heat pipes utilizing Direct Touch Heatpipe (DTH) technology for optimal heat dissipation. This manual provides essential information for proper installation, operation, and maintenance of your CPU cooler.

Whakaahua: Mua view of the Zalman CNPS9X Performa Plus ARGB CPU Cooler with its fan illuminated, showcasing the vibrant ARGB lighting.

2. Ihirangi mokete

Me manatoko kei roto i te kete ngā wāhanga katoa i mua i te tāutanga:

• CPU Cooler (Heatsink and Fan assembly)
• Mounting Brackets for Intel Sockets (LGA 1851/1700/1200/1151/2011)
• Mounting Brackets for AMD Sockets (AM5/AM4)
• Backplate (for Intel sockets)
• Ngā tīwiri whakairi me ngā mokowā
• Whakapiri Weariki
• Pukapuka Kaiwhakamahi (tenei tuhinga)

3. Nga korero haumaru

Please read and follow these safety guidelines to prevent damage to the product or injury:

• Me momotu te hiko mai i tō rorohiko i mua i te tāutanga, i te tango rānei i tētahi wāhanga.
• Handle the CPU cooler and other components with care to avoid bending fins or damaging electrical contacts.
• Kaua e taea e nga tamariki.
• Kaua e ngana ki te whakarereke i te whakamatao me ona waahanga.
• Me whakarite kia tika te tūnga whenua hei ārai i te kino o te tukunga hiko pateko (ESD).

4. Tatūnga me te Tāuta

This section outlines the general steps for installing the Zalman CNPS9X Performa Plus ARGB CPU Cooler. Specific steps may vary slightly depending on your motherboard and CPU socket type (Intel or AMD).

4.1. Whakaritenga

1. Weto Whakakore: Shut down your computer and disconnect the power cable.
2. Uru atu ki te Papaaho Matua: Open your computer case to access the motherboard and CPU socket.
3. Remove Old Cooler: If an old cooler is present, carefully remove it and clean any residual thermal paste from the CPU surface using isopropyl alcohol and a lint-free cloth.
4. Tāutuhia te Momo Pūnaha: Determine if your CPU is Intel (LGA 1851/1700/1200/1151/2011) or AMD (AM5/AM4) to select the correct mounting hardware.

4.2. Te Whakamau i te Pouaka Whakamatao

Follow the instructions specific to your CPU socket type:

For Intel Sockets (LGA 1851/1700/1200/1151/2011):

1. Install the appropriate Intel backplate on the rear of the motherboard, aligning the holes.
2. Secure the standoffs through the motherboard from the front side.
3. Attach the Intel mounting brackets to the cooler base using the provided screws.
4. Hoatu he iti o te whakapiri waiariki ki te pokapū o te horapa wera whakauru (IHS) o te PTM.
5. Carefully place the cooler onto the CPU, aligning the mounting holes with the standoffs.
6. Secure the cooler by tightening the mounting screws in a diagonal pattern until snug. Do not overtighten.

For AMD Sockets (AM5/AM4):

1. Remove the plastic retention clips from the stock AMD backplate (if present), but keep the original backplate.
2. Install the AMD standoffs onto the original backplate's screw holes.
3. Attach the AMD mounting brackets to the cooler base using the provided screws.
4. Hoatu he iti o te whakapiri waiariki ki te pokapū o te horapa wera whakauru (IHS) o te PTM.
5. Carefully place the cooler onto the CPU, aligning the mounting holes with the standoffs.
6. Secure the cooler by tightening the mounting screws in a diagonal pattern until snug. Do not overtighten.

Whakaahua: Raro view of the Zalman CNPS9X Performa Plus heatsink, clearly showing the direct touch heat pipes designed for efficient heat transfer from the CPU.

Image: A diagram illustrating Zalman's Direct Touch Heat Pipes (DTH) technology, where copper heat pipes make direct contact with the CPU, and highlighting the electrophoretic coating for enhanced thermal conductivity and durability.

4.3. Hononga taura

1. Mana Hiko: Connect the 4-pin PWM fan cable from the cooler to the CPU_FAN header on your motherboard.
2. ARGB Rama: Connect the 3-pin ARGB cable to a compatible 5V Addressable RGB header on your motherboard. Ensure it is a 5V ARGB header and not a 12V RGB header to prevent damage.

Image: A diagram highlighting the anti-vibration rubber dampers integrated into the fan mounting points of the Zalman CNPS9X Performa Plus, designed to reduce noise and vibrations during operation.

5. Nga Tohutohu Whakahaere

Once installed, the Zalman CNPS9X Performa Plus ARGB CPU Cooler operates automatically based on your motherboard's fan control settings.

• Mana Tere Pā (PWM): The 4-pin PWM connection allows your motherboard to dynamically adjust the fan speed based on CPU temperature, optimizing cooling performance and noise levels. You can typically configure fan curves in your motherboard's BIOS/UEFI settings or through manufacturer-provided software.
• Mana Rama ARGB: The ARGB lighting can be controlled via your motherboard's ARGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync). Ensure your motherboard supports 5V Addressable RGB.

6. Tiaki

Ko te tiaki i nga wa katoa ka awhina i te mahi tino pai me te roa o to whakamatao CPU.

• Tango Puehu: Periodically (every 3-6 months, or more frequently in dusty environments) use compressed air to clean dust from the heatsink fins and fan blades. Hold the fan blades gently to prevent them from spinning rapidly during cleaning, which can damage the fan motor.
• Whakapiri Weariki: While not frequently required, if you remove the cooler for any reason, it is recommended to clean off the old thermal paste from both the CPU and cooler base and apply a fresh layer before reinstallation.

7. Te Raru

If you encounter issues with your Zalman CNPS9X Performa Plus ARGB CPU Cooler, refer to the following common problems and solutions:

• Te Paemahana PTM Teitei:
  • Me whakarite kia mau te whakamatao me te whakapiri katoa ki te PTM.
  • Manatokohia i tika te tono whakapiri waiariki me te riterite.
  • Check if the fan is spinning. If not, ensure the 4-pin PWM cable is properly connected to the CPU_FAN header.
  • Clean any dust buildup from the heatsink fins.
  • Check BIOS/UEFI settings to ensure the CPU fan speed is set to an appropriate profile (e.g., not silent mode if temperatures are high).
• Fan Not Spinning or Making Noise:
  • Confirm the 4-pin PWM cable is securely connected to the CPU_FAN header.
  • Tirohia mēnā he taura, he arai rānei e whakararuraru ana i ngā mata o te pā hau.
  • If the fan is making unusual noises, it might be faulty. Contact support if within warranty.
• Ko te Rarama ARGB Kare e Mahi:
  • Ensure the 3-pin ARGB cable is correctly connected to a 5V Addressable RGB header on your motherboard.
  • Manatokohia kua whakauruhia, kua tika te whirihora i te rorohiko ARGB o to papahoa.
  • Tirohia mo nga hononga wetewete.
  • Confirm that the ARGB header on your motherboard is enabled in the BIOS/UEFI.

8. Whakatakotoranga

Key technical specifications for the Zalman CNPS9X Performa Plus ARGB CPU Cooler:

9. Nga Korero Whakaputanga

Zalman products typically come with a limited manufacturer's warranty. The specific terms and duration of the warranty may vary by region and product. Please refer to the warranty card included with your product or visit the official Zalman webpae mo nga korero mo te whakamana me nga tikanga rehitatanga.

10. Tautoko

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Zalman customer support:

• Whaimana Webpae: Tirohia te Zalman official webpae mō ngā Pātai Auau, ngā tango taraiwa, me ngā taipitopito whakapā.
• Ratonga Kiritaki: Refer to the contact details provided on the Zalman webpae mo to rohe motuhake.