Fanttik X8 APEX Portable Tire Inflator Instruction Manual

Kupu Whakataki

The Fanttik X8 APEX is a portable, cordless tire inflator designed for efficient and precise inflation of various tires. It features a dual LED screen, multiple preset inflation modes, and a maximum pressure of 150 PSI. This manual provides detailed instructions for the safe and effective use of your device.

He aha kei roto i te Pouaka

• Fanttik X8 APEX Tire Inflator
• Air Tube (with Schrader valve adapter)
• Presta Valve Whāurutau
• Ngira Poipoi
• Ura Whakatau (USB-C)
• Pukoro Rokiroki

Tatūnga

1. Akona Tuatahi: Before first use, fully charge the device using the provided USB-C charging cable. Connect the USB-C end to the inflator's input port (IN 5V/3A) and the USB-A end to a compatible power source. The battery indicator on the screen will show charging progress.
2. Tāpirihia te Ngongo Hau: Screw one end of the flexible air tube securely into the designated port on the top of the inflator.
3. Tīpakohia te Pūurutau: Choose the appropriate adapter (Schrader valve is pre-attached to the air tube, Presta valve adapter, or ball needle) for the item you intend to inflate.

Nga Tohutohu Whakahaere

1. Hiko Whakaka/Weto: Long-press the power button (center button on the control panel) to turn the inflator on or off. The dual LED screen will illuminate.
2. Hono atu ki te Taonga: Securely attach the appropriate adapter on the air tube to the valve stem of the tire or item you wish to inflate. The screen will display the current pressure.
3. Select Inflation Mode: Press the mode button (left button on the control panel) to cycle through the preset modes: Car, Motorcycle, Bicycle, Ball, or Manual. Each mode has a default pressure range.
4. Adjust Target Pressure: Use the '+' and '-' buttons to adjust the desired target pressure (PSI, KPA, or BAR). The inflator will automatically stop once this pressure is reached.
5. Tīmata te pikinga: Press the power button (center button) to begin inflation. The device will operate until the preset pressure is achieved, then automatically shut off.
6. Taumahi Rama: Short-press the light button (bottom button on the control panel) to activate the LED flashlight. Press again to switch to SOS mode, and a third time to turn it off.
7. Mahi Puke Hiko: The device includes a 5V/2A USB-A output port on the bottom, allowing it to function as an emergency power bank for charging other devices.
8. Air Compressor for Brad Nailer: The X8 APEX can also function as an emergency air compressor for brad nailers (for nails ≤1.18 inch). An adapter (not included) may be required.

Te tiaki

• Puritia te taputapu kia ma, kia kore he puehu me te para.
• Store the inflator and its accessories in the provided storage pouch in a cool, dry place.
• Ensure the air tube and adapters are free from damage before each use.
• Tirohia te taumata o te pākahiko me te whakakii i nga wa e tika ana kia pai ai te mahi.

Raparongoā

• Kāore te Pūrere i te Whakakā: Kia tino utua te pākahiko. Ki te kore, honoa ki tētahi pūtake hiko mā te whakamahi i te taura USB-C.
• No Inflation/Slow Inflation: Check that the air tube is securely screwed into both the inflator and the tire valve. Ensure the correct inflation mode and target pressure are set.
• Pānui Pēhanga Hē: Ensure the air tube is properly connected to the valve stem without any leaks.
• Te wera nui: If the device becomes excessively hot during prolonged use, allow it to cool down before continuing. The innovative cooling function helps prevent this during normal operation.

Whakatakotoranga

Pūtāhui me te Tautoko

For warranty information, product registration, or technical support, please refer to the official Fanttik webpaetukutuku, whakapā atu ranei ki ta raatau ratonga kaihoko. Puritia to riiki hoko hei tohu mo te hoko.