ANENG PN130 Clamp Pukapuka Kaiwhakamahi Multimeter

1. Kupu Whakataki

The ANENG PN130 is a versatile, U-shaped clamp multimeter designed for efficient and accurate electrical measurements. Featuring a color LCD and a rechargeable lithium battery, this tool is ideal for diagnosing electrical issues in various settings, from automotive systems to household circuits. It offers a wide range of measurement capabilities including AC/DC current, voltage, resistance, capacitance, continuity, diode testing, and frequency. The non-contact voltage (NCV) detection function enhances safety during operation.

2. Nga korero haumaru

Always observe basic safety precautions when using this device to avoid potential electric shock or personal injury.

• Pānuihia me te mohio ki nga tohutohu katoa i mua i te whakamahi.
• Kaua e neke atu i ngā uara tāuru mōrahi kua tohua mō ia mahi ine.
• Kia tupato ki te mahi tahi me te voltagkei runga ake i te 30V AC RMS, te tihi 42V, te 60V DC ranei. Ko enei voltaghe morearea ohorere.
• Always disconnect power to the circuit under test before making resistance, capacitance, or diode measurements.
• Ensure the test leads are properly connected and in good condition before each use.
• Kaua e whakahaeretia te mita ki te ahua kua pakaru, ki te tuwhera ranei te keehi.
• Whakamahia te Voltage (NCV) function to detect live wires without direct contact, enhancing safety.
• Mauria ngā taputapu tiaki whaiaro (PPE) e tika ana, pērā i ngā mōhiti haumaru me ngā karapu whakamahana, ina mahi ana me ngā ara iahiko hiko.

3. Ihirangi mokete

The ANENG PN130 Clamp Multimeter package includes the following items:

• 1 x ANENG PN130 Multimeter
• 1 x Combination Test Lead Set (includes 4 connection jacks, 2 PVC cables, 2 copper needles, 2 U-shaped inserts, 2 test probes, 2 alligator clips, 2 piercing needles)
• 1 x Standard Multimeter Test Lead
• 1 x USB-C Taura Whakamaa
• 1 x Pukapuka Tohutohu
• 1 x Puke Rokiroki

Image: Contents of the ANENG PN130 package, including the multimeter, various test leads, charging cable, manual, and storage bag.

4. Nga Hua o te Hua

• Efficient Measurement and Troubleshooting: Equipped with True-RMS functionality, capable of measuring AC/DC current, voltage, resistance, capacitance, continuity, diode, frequency (Hz), and identifying phase/neutral lines. This digital clamp meter is an optimal tool for diagnosing electrical issues in vehicles and internal electrical systems, significantly improving work efficiency.
• U-ahua Clamp Hoahoa: The ANENG PN130 features a U-shaped design, allowing for easy clamping around wires without the need to cut them. This enables quick measurements in confined spaces. It also includes a data hold function for convenient recording and subsequent analysis of measured values.
• Kore-Whakapā Voltage (NCV) Function: To utilize the NCV function, long-press the KORERO button to enter NCV mode. Hold the top of the clamp meter near the cable or circuit you wish to test. The device will emit an audible alert upon detecting an electromagnetic field. This feature allows for current measurement without direct contact with live conductors, reducing the risk of electric shock and enhancing user safety.
• Ka taea te utu me te Kawe: The PN130 multimeter boasts a compact and portable design, powered by a USB-C rechargeable lithium battery. It can be charged even while performing measurements. This makes it suitable for a wide range of tasks, from simple DIY continuity checks to complex outdoor or garage work, providing stable measurement values without concerns about power supply.
• Color LCD with Backlight: The device features a clear color LCD display with backlight, ensuring readability in various lighting conditions.
• Ko te rama rama-i roto: A built-in flashlight assists in illuminating dark work areas.

Image: The ANENG PN130 Multimeter highlighting its various measurement capabilities and display features.

5. Tatūnga

5.1. Tāuta Pūhiko me te Whakatau

The ANENG PN130 comes with a built-in rechargeable lithium battery.

• Before first use, ensure the battery is fully charged using the provided USB-C charging cable.
• Connect the USB-C cable to the multimeter's charging port and the other end to a standard USB power adapter (not included).
• The battery status will be indicated on the color LCD.

Image: The ANENG PN130 Multimeter connected to a USB-C charging cable, demonstrating its rechargeable feature.

5.2. Te hono i nga Kaitohu Whakamatau

For measurements requiring direct contact, connect the test leads to the appropriate input jacks on the multimeter.

• Whakauruhia te taura whakamātautau pango ki te hononga "COM" (noa).
• Insert the red test lead into the "VΩmA" jack for voltage, ngā inenga ātete, te kaha, te auau, me ngā diode.
• Ensure a secure connection for accurate readings.

6. Nga Tohutohu Whakahaere

6.1. Te Hiko / Whakaweto

Press the power button to turn the multimeter ON or OFF. The device may have an auto-power-off feature to conserve battery.

6.2. Kōwhiringa Mahi

Rotate the central dial to select the desired measurement function (e.g., AC current, DC voltage, resistance). Use the KORERO button to toggle between different sub-functions within a mode (e.g., AC or DC voltagme).

6.3. AC/DC Current Measurement (Clamp Taumahi)

Ko te ahua U-clamp allows for non-invasive current measurement.

1. Turn the dial to the AC or DC current measurement mode (indicated by A~ or A=).
2. Patohia te keu hei whakatuwhera i te clamp kauae.
3. Enclose a single conductor (not a bundle of wires) within the clamp kauae.
4. Release the trigger to close the jaws securely around the conductor.
5. Pānuihia te uara o nāianei i te whakaaturanga.

Image: The ANENG PN130 Multimeter being used to measure DC current in a vehicle's engine compartment.

Image: The ANENG PN130 Multimeter measuring AC current by clamping around a single wire in an electrical distribution panel.

6.4. AC/DC Voltage Inenga

Hei ine voltage:

1. Connect the test leads to the appropriate jacks (black to COM, red to VΩmA).
2. Hurihia te waea ki te voltage measurement mode (V~ for AC, V= for DC). Use the KORERO pātene ki te hiahiatia.
3. Touch the test probes to the points where you want to measure voltage.
4. Pānuihia te voltage uara kei runga i te whakaaturanga.

Image: The ANENG PN130 Multimeter with test leads connected, measuring AC/DC voltage from a power strip.

6.5. Resistance, Capacitance, Diode, and Continuity Measurement

For these measurements, ensure the circuit is de-energized before connecting the test leads.

1. Connect the test leads (black to COM, red to VΩmA).
2. Turn the dial to the appropriate mode (Ω for resistance, ∔ for capacitance, ⇋ for diode, or )) for continuity). Use the KORERO button to cycle through these functions if they share a dial position.
3. Touch the test probes to the component or circuit points.
4. Read the value on the display. For continuity, an audible beep indicates a continuous circuit.

6.6. Frequency (Hz) Measurement

Ki te ine i te auau:

1. Connect the test leads (black to COM, red to VΩmA).
2. Turn the dial to the frequency mode (Hz).
3. Touch the test probes to the circuit points where you want to measure frequency.
4. Pānuihia te uara auau kei runga i te whakaaturanga.

6.7. Whakapā-kore Voltage (NCV) Rapunga

The NCV function allows for safe detection of live voltage kore whakapā tika.

1. Pēhia roa te KORERO button to activate NCV mode. The display will show "NCV".
2. Move the top part of the clamp meter close to the suspected live wire or electrical outlet.
3. Mena AC voltage is detected, the meter will emit an audible beep and the NCV indicator will light up, with intensity varying based on signal strength.

Image: The ANENG PN130 Multimeter's built-in flashlight providing illumination in a low-light environment.

6.8. Te Pupuri Raraunga me te Rama Whakamuri

• Pehia te KAUPAPA pātene hei whakatio i te pānui o nāianei kei te mata. Pēhia anō hei tuku.
• Press the backlight button (often indicated by a light bulb icon) to turn the display backlight ON or OFF for improved visibility in dim conditions.

Image: The ANENG PN130 Multimeter's color LCD display showing a reading with the backlight activated and the data hold function engaged.

6.9. Ko te rama rama-i roto

The multimeter includes a built-in flashlight to illuminate dark work areas. This is typically activated by a dedicated button or a long press of the backlight button.

Image: The ANENG PN130 Multimeter's built-in flashlight providing illumination in a low-light environment.

7. Tiaki

• Te horoi: Wipe the meter with a dry, soft cloth. Do not use abrasives or solvents.
• Rokiroki: When not in use for extended periods, store the multimeter in its protective storage bag in a cool, dry place.
• Tiaki Pūhiko: Recharge the lithium battery regularly to maintain its lifespan, even if the device is not frequently used.
• Nga Tohu Whakamatau: Inspect test leads for any damage (cuts, cracks) before each use. Replace damaged leads immediately.

8. Te Raru

If the multimeter is not functioning as expected, consider the following:

• No Display/Low Battery: Ensure the battery is charged. Connect the USB-C charging cable and allow it to charge for some time.
• Pānui hē:
  • Check if the correct function mode is selected for the measurement.
  • Verify that test leads are securely connected to the correct input jacks.
  • Ensure the circuit under test is de-energized for resistance, capacitance, and diode measurements.
  • Mo nga inenga o naianei me te clamp, ensure only a single conductor is enclosed.
• Kaore te NCV e kitea: Ensure NCV mode is activated (long-press SELECT). The sensitivity may vary with distance and electromagnetic field strength.
• Karekau Pao Tonu: Check if the continuity mode is selected. Ensure the circuit is complete and has very low resistance.

If issues persist, refer to the detailed instruction manual provided in the package or contact ANENG customer support.

9. Whakatakotoranga

10. Pūtāhui me te Tautoko

For warranty information, technical support, or service inquiries regarding your ANENG PN130 Clamp Multimeter, please refer to the contact details provided in the included instruction manual or visit the official ANENG webpae.

11. Related Videos

The following videos provide additional information or demonstrations related to clamp multimeters. Please note that these videos may feature different models or brands, but the general principles of operation and features may be similar.