Kupu Whakataki
The Husky 850 Lumens Dual-Power LED Rechargeable Headlamp is designed to provide versatile and powerful illumination for various tasks, from personal lighting to larger job site requirements. This headlamp integrates advanced LED and COB (Chip-on-Board) technology to deliver exceptional brightness and adaptable beam patterns. It features a dual-power system, allowing operation with either the included rechargeable battery or standard AAA alkaline batteries, ensuring continuous functionality.
Image: The Husky 850 Lumens Dual-Power LED Rechargeable Headlamp, whakaatucasintōna hoahoa kiato me te whitiki whakarite.
Nga waahanga hua
- 8 Aratau Maama: Includes Turbo, High Spot, High Flood, High Combo, High Wide-Angle, ECO, Red, and Red Flashing modes for diverse lighting needs.
- Dual-Power System: Operates with the included rechargeable lithium-polymer battery or three AAA alkaline batteries (not included).
- USB Momo-C Ka taea te utu: Equipped with a lithium-ion battery and charging cable for convenient recharging.
- Variable Dimming: Allows adjustment of light intensity across various modes.
- Integrated Tilt Feature: Enables precise control over light direction to prevent glare.
- Ātete wai: Designed to meet an IP54 rating, offering protection against splashing water.
- Hoahoa whakamarie: Features an adjustable head strap for a secure and comfortable fit.
- Mahara Ataata: Remembers the last used mode setting for quick recall.
Tatūnga
Whakauru Pohiko me te Tohutohutia
- Pūhiko Rechargeable: Te paneamp comes with a pre-installed rechargeable lithium-polymer battery. To charge, connect the included USB Type-C cable to the headlamp's charging port and to a compatible USB power source. The charging indicator will show the charging status. A full charge typically takes approximately 2 hours.
- AAA Alkaline Batteries (Optional): For alternative power, open the battery compartment and insert three AAA alkaline batteries (not included), ensuring correct polarity (+/-). Close the compartment securely.
Whakaahua: Kati-ake view o te upokoamp's USB-C charging port, indicating where to connect the charging cable.
Te Whakatikatika i te Mahunga
Te paneamp features an adjustable elastic strap for a comfortable and secure fit. To adjust, slide the buckles on either side of the strap until the headlamp sits snugly on your head without being too tight. Ensure the headlamp kei waenganui o tō rae te waeine.
Image: Detail of the adjustable head strap, highlighting its comfort and fit features.
Nga Tohutohu Whakahaere
Te Hia/Weto me te Kōwhiringa Aratau
Te paneamp is operated via a single power button located on the top of the unit.
- Whakahiko: Pēhia te pātene mana kotahi hei whakakā i te paneamp. It will activate in the last used mode due to the Smart Memory feature.
- Aratau Porohita: Ahakoa ko te upokoamp is on, press the power button repeatedly to cycle through the 8 available light modes: Turbo, High Spot, High Flood, High Combo, High Wide-Angle, ECO, Red, and Red Flashing.
- Weto Whakakore: Press and hold the power button for approximately 2 seconds to turn off the headlamp from any mode.
Image: Diagram illustrating the 8 light modes and the Smart Memory feature, showing the button layout.
Rererangi Taurangi
Some light modes support variable dimming. To adjust brightness, press and hold the power button while the headlamp is in a dimmable mode. The light intensity will gradually increase or decrease. Release the button when the desired brightness is reached.
Hoa Whakaritea
Te paneamp unit can be tilted up or down to direct the light beam precisely where needed. This feature helps in controlling light dispersion and preventing blinding others, especially in close quarters.
Image: Illustration demonstrating the adjustable tilt mechanism of the headlamp, e whakaatu ana i tōna whānuitanga o te nekehanga.
Te tiaki
Te horoi
Hei horoi i te upokoamp, murua ki te wai ngohengohe,amp cloth. Do not use abrasive cleaners or solvents, as these may damage the unit. Ensure the charging port cover is securely closed before cleaning or exposing to moisture.
Rokiroki
I te wā e penapena ana i te paneamp for extended periods, especially if using AAA alkaline batteries, remove the batteries to prevent leakage and potential damage to the unit. Store the headlamp i te waahi hauhautanga, maroke atu i te ra tika me te wera nui.
Ātete wai
Te paneamp has an IP54 water-resistance rating, meaning it is protected against dust ingress and splashing water from any direction. It is not designed for submersion in water.
Raparongoā
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Tihiamp kaore e huri. | Kua pau te pākahiko, kua tāuta hē rānei. | Recharge the lithium-polymer battery or replace AAA alkaline batteries, ensuring correct polarity. |
| Ko te marama he atarua, he korikori ranei. | Te utu iti o te papahiko. | Recharge the lithium-polymer battery or replace AAA alkaline batteries. |
| Tihiamp e kore e utu. | Te taura utu, te take puna hiko ranei. | Ensure the USB-C cable is properly connected and the power source is functional. Try a different cable or power adapter. |
| Cannot cycle through all modes. | Button not pressed correctly or internal issue. | Ensure a firm, single press for mode cycling. If issue persists, contact customer support. |
Whakatakotoranga
| Āhuahira | Taipitopito |
|---|---|
| Tau tauira | 91308 |
| Momo Puna Maama | LED, COB |
| Brightness (Turbo Mode) | 900 Lumens |
| Brightness (Spot+Flood) | 1000 Lumens |
| Brightness (High Spot) | 500 Lumens |
| Brightness (High Flood) | 100 Lumens |
| Brightness (ECO Mode) | 10 Lumens |
| Tawhiti Kurupae (Max) | 80 mita (87 iari) |
| Run-time (ECO Mode) | 36 haora |
| Run-time (Spot+Flood) | 8 haora |
| Run-time (High Spot) | 13 haora |
| Run-time (High Flood) | 45 haora |
| Puna Mana | Rechargeable Lithium-Polymer Battery (1100mAh, 3.7V) or 3 AAA Alkaline Batteries (not included) |
| Waa Whakatau | Tata ki te 2 hāora (mā te USB-C) |
| Whakatauranga Atete Wai | IP54 |
| Rauemi | Kirihou |
| Nga Ahinga (D x W x H) | 1.97" x 4.19" x 2.69" |
| Taumaha Tūemi | 13.9 hekere |
Image: Performance table based on FL1 standards, showing lumens, run time, and beam distance for various modes.
Pūtāhui me te Tautoko
Nga korero Whakaputanga
This Husky headlamp kei te tautokohia e a Pūtāhui Ora. For specific details regarding warranty coverage and claims, please refer to the warranty documentation included with your product or visit the official Husky tools webpae.
Tautoko Kiritaki
If you encounter any issues or have questions regarding the operation, maintenance, or troubleshooting of your Husky 850 Lumens Dual-Power LED Rechargeable Headlamp, please contact Husky customer support. Contact information can typically be found on the product packaging or the official Husky webpae.
