Kupu Whakataki
Thank you for choosing the ENGWE EP-2 Pro Electric Folding Bike. This manual provides essential information for the safe operation, assembly, maintenance, and troubleshooting of your new electric bicycle. Please read this manual thoroughly before your first ride to ensure optimal performance and safety.
Nga korero haumaru
Ko to haumaru te mea nui. Me whai tonu ki nga aratohu e whai ake nei:
- Me mau tonu he potae e tutuki ana i ngā paerewa haumaru.
- Kia mau ki nga ture me nga ture waka a rohe.
- Tirohia te waka i mua i te haerenga i mua i ia whakamahinga, tirohia ngā pēraki, ngā potae me te taumata pākahiko.
- Kaua e eke i raro i te awe o te waipiro me te raau taero.
- Kia tupato ki to taiao me te eke parepare.
- Āta karohia te eke pahikara i ngā wā kino o te rangi, pērā i te ua nui, te hukarere rānei.
- Me whakarite kia tika te whakapiko me te mau o te pahikara i te wā e kawe ana.
Tatūnga me te Runanga
Your ENGWE EP-2 Pro electric bike comes 85% pre-assembled. The following steps will guide you through the final assembly.
Utauta kei roto:
- Kete taputapu
Nga Waahi Huinga:
- Te Hurihanga i te Tāpare: Carefully unfold the main frame of the bicycle until it locks into place. Secure the folding mechanism latch.
- Tāutatanga Pae kakau: Insert the handlebar stem into the fork tube and tighten the quick-release lever or bolts securely. Adjust the handlebar height to your comfort.
- Āpitihanga o te Paepae: Identify the left (L) and right (R) pedals. Thread the 'L' pedal counter-clockwise into the left crank arm and the 'R' pedal clockwise into the right crank arm. Tighten firmly with a wrench.
- Te Whakatikatika i te Pou Nohoanga: Insert the seat post into the frame and adjust the height to ensure your feet can comfortably touch the ground when stopped. Secure with the quick-release lever.
- Te pikinga o nga potae: Inflate the 20''x4.0" fat tires to the recommended pressure indicated on the tire sidewall.
- Taki Waahi: Ensure both front and rear disc brakes are functioning correctly and the levers provide firm resistance.
- Tāuta Pūhiko: If the battery is not pre-installed, slide it into its compartment until it clicks securely. Ensure it is locked with the key if applicable.
The ENGWE EP-2 Pro Electric Folding Bike in its assembled state, showcasintōna anga pakari me ōna potae matotoru.
Te Whakahaere i tō ENGWE EP-2 Pro
Pūhiko me te Whakatau:
The bike is equipped with a powerful 48V 13Ah removable battery, offering a maximum range of up to 120KM with pedal assist. To charge, connect the charger to the battery port and a power outlet. The indicator light on the charger will show charging status. Always use the original charger provided.
Illustration of the long-range 48V 13Ah removable battery, capable of up to 120KM range.
Whakaatu me nga Mana:
The integrated LED color display provides real-time information including speed, battery level, and mileage. It helps you monitor your ride data effectively.
The advanced LCD display showing speed, battery level, and trip mileage, along with the 55Nm Power-Boost Button.
Riding Modes and Gears:
The EP-2 Pro offers three riding modes:
- Aratau Hiko Parakore: Provides motor assistance without pedaling.
- Aratau Awhina Pedal: The motor provides assistance as you pedal, with varying levels of support.
- Aratau Paihikara Punoa: Ride like a traditional bicycle without any motor assistance.
The 7-speed transmission system allows you to easily shift gears to adapt to different terrains and riding conditions.
Pātene Whakarei-Mana:
The bike features a 55Nm Power-Boost Button designed for increased comfort and riding pleasure, especially when accelerating or climbing hills. This button provides an instant surge of power.
Visual representation of the Power-Boost feature, highlighting the 55Nm torque for uphill assistance. Note: Throttle handlebars are illegal for EU roads.
Pūnaha Piripiri:
Equipped with 180mm dual disc brakes, the EP-2 Pro provides responsive and sensitive stopping power for enhanced safety.
Te Āheitanga ki te Whenua:
With 20''x4.0" fat tires and dual suspension (front suspension), this e-bike is designed to handle various terrains, from paved roads to gravel paths and dirt tracks, ensuring a comfortable ride.
The ENGWE EP-2 Pro is built for all terrains, including asphalt, sand, gravel, and dirt roads, thanks to its 20x4.0 inch fat tires and front suspension.
Cargo Features:
The bike is equipped with a rear rack and mudguards, making it a reliable partner for urban commuting and carrying essentials, with a capacity of up to 150kg.
The ENGWE EP-2 Pro is equipped with 180mm disc brakes, a rear rack, and mudguards, making it suitable for urban delivery with a 150kg capacity.
Te tiaki
Ko te tiaki i nga wa katoa ka mau te roa me te mahi haumaru o to e-pahikara.
- Te horoi: Horoia to paihikara me te panuiamp kakahu. A ape i te horoi pehanga nui ki runga i nga waahanga hiko.
- Tire: Check tire pressure before each ride and inflate to the recommended PSI. Inspect tires for wear and tear.
- Parai: Periodically check brake pads for wear and ensure brake levers are firm. Adjust or replace as needed.
- mekameka: Kia ma te mekameka, kia pania hoki ki te hinu whakahinuhinu kia maeneene ai te whakawhiti taputapu, kia kore ai hoki e waikura.
- Tiaki Pūhiko: Penapenahia te pākahiko ki te wāhi hauhautanga, maroke. Whakautua i ia wā, ahakoa kāore e whakamahia ana, kia mau tonu ai te hauora o te pākahiko. Kaua e tukua kia pau katoa te pākahiko.
- Ngā toromoka: Tirohia ngā pūtu, ngā nati me ngā rīwhi tuku-tere i ia wā, i ia wā, kia tino mau ai.
Raparongoā
Ko tenei waahanga e aro ana ki nga take noa ka pa ki a koe.
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Kaore te paihikara e kaha ana | Kāore te pākahiko i utua, kāore te pākahiko i whakanohoia tika, kua wetekina te taura hiko | Charge battery, ensure battery is fully inserted and locked, check all cable connections. |
| Kaore te motuka e awhina | Low battery, incorrect riding mode, sensor issue | Check battery level, switch to pedal assist or pure electric mode, inspect sensor connections. |
| He ngoikore te frein | Worn brake pads, loose cable, air in hydraulic system (if applicable) | Inspect and replace brake pads, tighten brake cable, consult a professional for hydraulic brake bleeding. |
| Ko nga nihowhiti kaore i te pai te neke | Dirty or unlubricated chain, misaligned derailleur | Clean and lubricate chain, adjust derailleur (refer to specific derailleur manual or professional). |
Whakatakotoranga
| Āhuahira | Taipitopito |
|---|---|
| Tau tauira | EP-2 BOOST |
| Te Tau Manakohia | Nga pakeke |
| Bicycle Type | Paihikara Taone |
| Momo Parai | Waea Kōpae |
| Tae | Karaka |
| Rauemi Tāpare | Konumohe |
| Nga Ahinga Papa | 169*57*120cm |
| Te maha o nga tere | 7 |
| Puna Mana | Pūhiko Rechargeable |
| Wattage | 624 Watt-haora |
| Momo Whakatarewa | Tuhinga o mua |
| Rahi wira | 20 Inihi |
| Nga waahanga motuhake | Fat Tires, Dual Suspension, Powerful Electric System, Advanced LCD Display |
| Nga Waahanga kei roto | Kete taputapu |
Pūtāhui me te Tautoko
ENGWE provides reliable customer support for your EP-2 Pro electric bike.
- Pūtāhui: We offer a one-year warranty on the motor, battery, and controller.
- Ratonga Kiritaki: Our customer service team is available 24/7 to answer your questions and provide assistance.
For any inquiries or support, please refer to the contact information provided with your purchase or visit the official ENGWE webpae.
