GEPRC Vapor-D6 O4 Pro FPV Drone User Manual

1. Kupu Whakataki

This manual provides essential information for the safe and effective operation of your GEPRC Vapor-D6 O4 Pro FPV Drone. Please read this manual thoroughly before operating the drone to ensure proper setup, flight, and maintenance. This drone is designed for advanced users and offers enhanced image clarity, stability, and agility for FPV racing and cinematic aerial footage.

2. Nga korero haumaru

• Takitaki i mua i te Rererangi: Always inspect the drone for any damage, loose parts, or obstructions before each flight. Ensure propellers are securely attached and free from cracks.
• Haumaru Pūhiko: Use only recommended 6S LiPo 1500mAh – 2000mAh batteries. Do not overcharge or over-discharge batteries. Store batteries in a safe, fireproof location.
• Taiao Rererangi: Rere ki ngā wāhi tuwhera, kia matara atu i te tangata, i ngā kararehe, i ngā whare, me ngā taura hiko. Āta karohia te rere i ngā hau kaha, i ngā āhuatanga kino rānei o te rangi.
• Raina Tirohanga: Maintain visual line of sight with your drone at all times, even when using FPV goggles.
• Propeller Hazard: Keep hands and face clear of propellers when motors are armed. Propellers can cause serious injury.
• Ture ā-rohe: Adhere to all local aviation laws and regulations regarding drone operation.
• Taumata pukenga: This drone is intended for advanced users. Beginners should seek guidance from experienced pilots.

3. Ihirangi mokete

Manatokona kei roto katoa nga mea kei roto i to kete:

• 1 x GEPRC Vapor-D6 O4 Pro FPV Drone
• 2 x HQprop 6X3.5X3 Propellers
• 2 x Battery Anti-Slip Pads
• 1 x Spare Screw Pack (includes: 6 x M3*10mm round head screws, 6 x M3*8mm round head screws, 2 x M3*6mm flat head screws, 1 x M5*28mm thin head screw, 1 x M5 flange nut, 4 x M3 rivet nuts)
• 1 x Vapor Side Panel
• 2 x M20*250mm Battery Straps
• 1 x L-shaped Screwdriver 1.5mm
• 1 x L-shaped Screwdriver 2.0mm
• 1 x GoPro Mount

4. Hua Neke Atuview

The GEPRC Vapor-D6 O4 Pro is a high-performance FPV racing quadcopter designed for seamless integration with the O4 Air Unit Pro VTX. It features a robust carbon fiber frame, anti-vibration design, and powerful motors for dynamic flight.

Whakaahua 1: Runga-raro view of the GEPRC Vapor-D6 O4 Pro FPV Drone, showcasing its carbon fiber frame and propeller layout.

Whakaahua 2: Koki view of the GEPRC Vapor-D6 O4 Pro FPV Drone, highlighting its integrated O4 Air Unit Pro and robust design.

Āhuatanga matua:

• O4 Air Unit Pro Integration: Designed for seamless integration with the O4 Air Unit Pro VTX, delivering enhanced image clarity and light sensitivity for immersive FPV racing and cinematic aerial shots.
• Hoahoa Anati-Wiiri: Features a precision-engineered aluminum lens housing and shock-absorbing silicone mounts to minimize vibrations, ensuring crisp, stable footage.
• High-Performance Motors: Equipped with SPEEDX2 E-series motors (2407E 1750KV) for smooth, responsive thrust and agility.
• Durable Carbon Fiber Frame: Built with reinforced 5mm carbon fiber arms and a robust layered plate design for exceptional durability and impact resistance.
• Stable Flight Performance: Factory-tuned PID controls ensure stable flight. Optional GPS module (GEP-M10) enables accurate positioning.

5. Tatūnga

5.1 Tāuta Pourewa

1. Ensure the drone is powered off and the battery is disconnected.
2. Identify the correct rotation direction for each propeller (CW and CCW).
3. Align the propeller with the motor shaft and press down firmly.
4. Secure the propeller with the provided propeller nuts, ensuring they are tightened but not overtightened.

5.2 Hononga Pūhiko

1. Place a battery anti-slip pad on the top plate of the drone.
2. Secure the recommended 6S LiPo battery (1500mAh – 2000mAh) to the drone using the M20*250mm battery straps. Ensure the battery is centered and tightly secured.
3. Connect the XT60 battery connector to the drone's power port.

5.3 Receiver Binding (ELRS 2.4G / TBS Nano RX)

Refer to your specific receiver's manual for detailed binding instructions. Generally, the process involves:

1. Power on your remote controller and set it to binding mode.
2. Power on the drone. The receiver's LED should indicate it's ready for binding (e.g., flashing rapidly).
3. Initiate the binding process on your remote controller.
4. Once bound, the receiver's LED should turn solid, indicating a successful connection.

5.4 FPV System Setup (O4 Air Unit Pro)

Ensure your FPV goggles are compatible with the O4 Air Unit Pro Transmission Module. Power on your goggles and the drone. The video feed should automatically connect. Adjust channel and frequency settings if necessary via your goggles' menu.

6. Nga Tohutohu Whakahaere

6.1 Arming/Disarming Motors

To arm the motors, move both sticks on your remote controller to the bottom-right corner (or as configured in Betaflight). The motors will spin up slowly. To disarm, move both sticks to the bottom-left corner.

6.2 Nga Mana Rererangi Taketake

• Puta: Controls altitude (left stick up/down).
• yaw: Rotates the drone left or right (left stick left/right).
• Piki: Tilts the drone forward or backward (right stick up/down).
• Rere: Tilts the drone left or right (right stick left/right).

6.3 Advanced Flight Modes

The Vapor-D6 O4 Pro supports various flight modes configurable in Betaflight. Common modes include:

• Aratau Koki: Self-leveling mode, suitable for stable cruising.
• Aratau Acro: Manual mode, offering full control for freestyle and racing.
• GPS Rescue (with optional GPS): If equipped with the GEP-M10 GPS module, this mode can assist in returning the drone to a predefined home point in case of signal loss or emergency.

7. Tiaki

• Tirohanga Pourewa: Regularly check propellers for any damage, bends, or cracks. Replace damaged propellers immediately.
• Tirohanga Tāpare: Inspect the carbon fiber frame and arms for any signs of stress, cracks, or damage after hard landings or crashes.
• Whakapai motuka: Keep motors free from dirt, dust, and debris. Use compressed air or a soft brush to clean them.
• Tiu Tiu: Periodically check all screws for tightness, especially those securing motors and frame components.
• Whakahōu Firmware: Keep your flight controller (GEP-F722-HD v2) and O4 Air Unit Pro firmware updated to the latest versions for optimal performance and bug fixes.

8. Te Raru

9. Whakatakotoranga

10. Pūtāhui me te Tautoko

GEPRC products are manufactured to high standards. For warranty claims or technical assistance, please contact GEPRC customer support. Our support team is available to assist with setup and troubleshooting.

For immediate assistance, refer to the official GEPRC website or contact their customer service channels. Keep your proof of purchase for any warranty-related inquiries.