ECOELER 6-Inch Motion Sensor LED Ceiling Light

1. Kupu Whakataki

Thank you for choosing the ECOELER 6-Inch Motion Sensor LED Ceiling Light. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new lighting fixture. Please read this manual thoroughly before installation and retain it for future reference.

Whakaahua 1.1: Mua view of the ECOELER 6-Inch Motion Sensor LED Ceiling Light.

2. Nga korero haumaru

Hei whakaiti i te tupono o te ahi, te wiri hiko, te whara whaiaro ranei, me whai tonu i enei tikanga tiaki haumaru:

• WHAKATŪPATO: Te Morea o te Ru Hiko. Momotuhia te hiko i te hiku, i te waahi ara iahiko ranei i mua i te whakauru, te mahi ranei.
• Me whakauru tenei hua ki runga i te waehere whakaurunga e tika ana ma te tangata e mohio ana ki te hanga me te mahi o te hua me nga aitua e pa ana.
• Use only 120V AC, 60Hz circuits.
• Do not attempt to disassemble or modify the fixture. There are no user-serviceable parts inside.
• Me whakarite kia mau nga hononga katoa me te whakamaarama tika.
• He pai tenei taputapu mo te whakamahi o roto anake.

3. Ihirangi mokete

Manatokona kei te noho nga waahanga katoa i mua i te tiimata o te whakaurunga:

• 6-Inch Black Motion Sensor LED Ceiling Light (x1)
• Whakanuia nga taputapu (ngu, nati waea)
• E26 Adapter Accessories (for recessed can installation)
• Pukapuka Tohutohu (tenei tuhinga)

Image 3.1: Included accessories for installation.

4. Nga Hua o te Hua

• 3CCT ka taea te whiriwhiri: Choose between 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight) color temperatures.
• Pūoko Nekehanga: Passive Infrared (PIR) sensor detects motion within 9-16 feet.
• Taihoa Wha Whakatika: Set the light to remain on for 30 seconds, 1 minute, or 5 minutes after motion ceases.
• Pūoko Maama: The motion sensor functions only in dark environments, remaining off during daylight hours.
• Pūngao pai: 16W LED provides 1000 lumens of brightness.
• Tāuta maha: Compatible with 3.5 or 4-inch junction boxes and 5 or 6-inch recessed cans.

Image 4.1: Key features including PIR sensor, 3CCT, and time delay settings.

5. Tatūnga me te Tāuta

Before installation, ensure the power supply is turned off at the circuit breaker.

5.1. Junction Box Installation

1. Tangohia te arotahi ma te kopikopiko i te karaka.
2. Connect the supply wires to the fixture wires using the provided wire nuts: black to black (live), white to white (neutral), and green/bare copper to green (ground).
3. Attach the fixture base to the junction box using the provided screws.
4. Twist the lens counter-clockwise to secure it back onto the fixture.

5.2. Recessed Can Installation

1. Tangohia te arotahi ma te kopikopiko i te karaka.
2. Install the spring clips onto the fixture base using screws.
3. Connect the E26 adapter to the existing socket in the recessed can.
4. Connect the fixture wires to the E26 adapter wires using wire nuts.
5. Push the disk light into the recessed can until the spring clips secure it.
6. Twist the lens counter-clockwise to secure it back onto the fixture.

Image 5.1: Installation diagrams for junction box and recessed can.

6. Nga Tohutohu Whakahaere

After successful installation and restoring power, the light will be ready for operation. The ECOELER motion sensor light operates automatically based on ambient light and motion detection.

6.1. Taumahinga Pūoko Motini

• Awatea: The light remains off even if motion is detected, due to the integrated light sensor.
• Nighttime/Dark Environments: The light will automatically turn on when motion is sensed within its detection range (approximately 9-16 feet).
• The light will turn off after the set time delay if no further motion is detected.

Image 6.1: Motion sensor operation during day and night.

6.2. Color Temperature (CCT) Adjustment

The fixture offers three color temperature options: 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight). To adjust the CCT:

1. Me mohio kua weto te hiko.
2. Carefully remove the lens by twisting it clockwise.
3. Locate the CCT selector switch on the LED board (refer to Image 4.1).
4. Slide the switch to your desired color temperature setting (3000K, 4000K, or 5000K).
5. Replace the lens by twisting it counter-clockwise.
6. Restore power to test the new setting.

Image 6.2: Visual representation of 3CCT options.

6.3. Time Delay Adjustment

The light can be set to remain on for 30 seconds, 1 minute, or 5 minutes after motion is no longer detected. To adjust the time delay:

1. Me mohio kua weto te hiko.
2. Carefully remove the lens by twisting it clockwise.
3. Locate the time delay selector switch on the fixture (refer to Image 4.1).
4. Slide the switch to your desired time setting (30s, 1min, or 5mins).
5. Replace the lens by twisting it counter-clockwise.
6. Restore power to test the new setting.

Image 6.3: Time delay countdown feature.

7. Tiaki

The ECOELER LED ceiling light requires minimal maintenance.

• Te horoi: Me whakaweto te hiko i mua i te horoinga. Horoia te taputapu ki te wai ngohengohe, maroke, paku rānei.amp kakahu. Kaua e whakamahia ngā matū kaha, ngā kaihoroi whakakoi rānei, nā te mea ka kino pea te whakaotinga, ngā wāhanga hiko rānei.
• Arotahi: Keep the lens clean to ensure optimal light output and motion sensor performance.

8. Te Raru

If you experience issues with your ECOELER LED ceiling light, refer to the following common problems and solutions:

9. Whakatakotoranga

10. Pūtāhui me te Tautoko

This ECOELER product is backed by a Limited Warranty. For specific warranty details and duration, please refer to the documentation included with your purchase or contact ECOELER customer support.

For technical assistance, troubleshooting, or warranty claims, please contact ECOELER customer support through the retailer where the product was purchased or visit the official ECOELER webpae.

Kaihanga: ECOELER ELECTRIC INC