Polibi 71.2" Rustic Display Cabinet with Glass Doors - Instruction Manual

1. Kupu Whakataki

This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your Polibi 71.2" Rustic Display Cabinet with Glass Doors. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

2. Nga Korero Haumaru Nui

• Pānuihia ngā tohutohu katoa: Ensure you understand all steps before assembly.
• Two-person assembly: Assembly is recommended with two adults to prevent injury and damage.
• Glass handling: Handle glass doors and shelves with extreme care. Tempered glass is designed to shatter into small, less harmful pieces if broken, but sharp edges can still occur.
• Anti-tip kit: Always secure the cabinet to a wall using the provided anti-tip hardware to prevent tipping, especially in households with children or pets.
• Tepe taumaha: Do not exceed the recommended weight capacity for shelves. Distribute weight evenly.
• Turanga: Whakanohoia te rūnanga ki runga i te mata papatahi, papatairite me te mau.
• Whakahau: Ensure adequate ventilation around the cabinet if storing electronics.

3. Ihirangi mokete

Before assembly, verify that all parts and hardware are present. If any items are missing or damaged, contact Polibi customer support.

3.1 Waehanga:

• Paewhiri Taha (2)
• Paewhiri Runga (1)
• Paepae Raro (1)
• Ngā Paewhiri o Muri (ngā wāhanga maha)
• Fixed Shelves (2)
• Ngā Whata Whakarite (2)
• Glass Doors (2)
• Door Handles (2)

3.2 Hardware:

• Ngā Maukati Kāmera me ngā Pūtu Kāmera
• Nga Pouaka Rakau
• Nga tīwiri (nga momo rahi)
• Paa Paa
• Hinihi tatau
• Anti-tip Kit (wall anchor, strap, screws)
• Wīni Allen (mēnā e hiahiatia ana)

4. Nga Tohutohu Huihuinga

Follow these steps carefully. Lay out all parts on a soft, clean surface to prevent scratches.

Step 1: Attach Cam Bolts and Dowels to Panels

Insert cam bolts and wood dowels into the pre-drilled holes of the side, top, and bottom panels as indicated in the assembly diagram. Ensure they are fully seated.

Hipanga 2: Huihuia te anga turanga

Connect the bottom panel to the side panels using cam locks. Tighten cam locks securely with a screwdriver. Ensure the structure is stable.

Hipanga 3: Tāutahia ngā Whata Pūmau

Slide the fixed shelves into their designated grooves or attach them using cam locks and dowels. These shelves provide structural integrity.

Hipanga 4: Whakauruhia te Paewhiri Runga

Secure the top panel to the side panels using cam locks and dowels, similar to the base frame assembly.

Hipanga 5: Tāutahia ngā Paewhiri Whakamuri

Carefully align and attach the back panels to the rear of the cabinet using small screws or nails. Ensure the cabinet is square before securing the back panels to prevent warping.

Image: The Polibi display cabinet with both glass doors open, revealing four internal shelves. This view illustrates the internal structure and shelf placement.

Step 6: Attach Door Hinges to Doors

Mount the hinges to the glass doors using the provided screws. Ensure hinges are oriented correctly for proper door swing.

Step 7: Attach Doors to Cabinet

With assistance, carefully attach the doors to the cabinet frame by securing the hinges to the pre-drilled holes on the side panels. Adjust hinges as needed to ensure doors are level and close properly.

Hipanga 8: Tāutahia nga Kakau tatau

Attach the door handles to the glass doors using the provided screws. Ensure they are tightened securely but do not overtighten, which could damage the glass or frame.

Whakaahua: He tata view of the black metal handles on the wooden-framed glass doors of the Polibi display cabinet. This shows the design and attachment point of the handles.

Hipanga 9: Tāuta Whata Whakaritea

Insert shelf pins into the desired holes on the side panels. Place the adjustable shelves onto the pins. Ensure all four pins are fully inserted and the shelf is level before placing items on it.

Step 10: Secure Cabinet with Anti-Tip Kit

Position the cabinet in its final location. Attach the anti-tip strap to the top rear of the cabinet and secure the other end to a wall stud using the provided wall anchor and screw. This step is crucial for safety.

5. Nga Tohutohu Whakahaere

5.1 Opening and Closing Doors:

Gently pull or push the door handles to open and close the glass doors. Avoid slamming the doors to prevent damage to hinges and glass.

5.2 Adjusting Shelves:

To adjust the height of the adjustable shelves, first remove all items from the shelf. Carefully lift the shelf and remove the four shelf pins. Reinsert the pins into the desired new holes, ensuring they are level, then place the shelf back onto the pins.

6. Tiaki

6.1 Cleaning the Cabinet:

• Mata Rakau: Horoia ki te ngohengohe, damp kakahu. Āta karohia ngā kaihoroi whakakoi, ngā matū kino rānei ka kino te āhua o te peita. Whakamaroke tonutia ki te kakahu ma.
• Kuaha Karaihe: Use a standard glass cleaner and a lint-free cloth. Spray cleaner onto the cloth, not directly onto the glass, to prevent overspray from damaging wood finishes.

6.2 Te Tiaki Whānui:

• Periodically check all screws and cam locks to ensure they remain tight. Retighten if necessary.
• Āta tirohia te kāpata kia kaua e whiti tika te rā, kia rerekē rawa rānei te pāmahana, ka piko pea, ka memeha rānei.
• Do not place hot items directly on the cabinet surface without protection.

7. Te Raru

8. Whakatakotoranga

• Waitohu: polybi
• Tauira: B0FCC8X5F3
• Rahi Hua: 33"W x 15.75"D x 71.2"H
• Rauemi: Engineered Wood, Bamboo, Tempered Glass
• Tae: Ma+parauri
• Te maha o nga whata: 4 (2 pūmau, 2 ka taea te whakarite)
• Huihuinga e hiahiatia ana: Ae
• Momo Whakapuru: Freestanding (wall anchor recommended)

Image: A diagram illustrating the dimensions of the Polibi display cabinet. It shows the overall width (33"), depth (15.75"), and height (71.2"), along with internal shelf depths and door frame width.

9. Pūtāhui me te Tautoko

Polibi products are manufactured with quality and care. For specific warranty details, please refer to the warranty card included with your purchase or visit the official Polibi website. If you encounter any issues or require assistance with assembly or parts, please contact Polibi customer support through the retailer where the product was purchased or via the contact information provided on the Polibi webpae.

For additional resources and product information, visit: Polibi Official Store