GAMDIAS Aura GC10m V2 WH Micro-Tower Computer Case User Manual

Kupu Whakataki

The GAMDIAS Aura GC10m V2 WH is a micro-tower computer case designed for Micro-ATX and Mini-ITX motherboards. It features a dual-chamber design, panoramic tempered glass panels, and comes equipped with three Addressable RGB (ARGB) fans to enhance system aesthetics and cooling. This manual provides essential information for the proper installation, operation, and maintenance of your computer case.

Whakaahua: Mua view of the GAMDIAS Aura GC10m V2 WH Micro-Tower Computer Case, showcasinōna panera karāhe whakamaroke me ngā pā hau ARGB kua tāutahia i mua.

Tatūnga me te Tāuta

Before beginning installation, ensure you have all necessary components and tools. Refer to your motherboard and component manuals for specific installation instructions.

1. Te whakarite i te keehi

Carefully remove the tempered glass side and front panels. These are typically secured with thumbscrews or a latch mechanism. Place them on a soft, flat surface to prevent scratches.

Whakaahua: Koki view of the case with the tempered glass side panel removed, showing the internal structure and fan mounts.

2. Whakauranga Papa Matua

• Tāutahia te whakangungu I/O (mēnā kāore anō kia tāpirihia ki tō papahoahoa) ki roto i te pūaha o muri o te pouaka.
• Align your Micro-ATX or Mini-ITX motherboard with the standoffs inside the case.
• Whakamauhia te papahoahoa mā te whakamahi i ngā tīwiri kua whakaratohia.

Whakaahua: Roto view of the case, highlighting the motherboard tray area and fan mounting points.

3. Te Waenga Whakawhiwhi Hiko (PSU).

• Install your PSU into its designated compartment, typically at the rear bottom of the case.
• Whakaorangia te PSU me nga wiri mai i muri o te keehi.
• Ensure the PSU fan faces the correct direction for optimal airflow (usually downwards if there's a vent, or upwards if not).

Image: Rear internal view of the case, showing the PSU mounting area and cable routing options.

4. Puku Tāuta

• 3.5" / 2.5" Drive Bay (HDD Cage): Locate the HDD cage. Install one 3.5" HDD or one 2.5" SSD/HDD.
• 2.5" Drive Bays: The case supports three additional 2.5" SSDs/HDDs. Mount these drives to the designated brackets or locations within the case.

5. Te Tāutanga o te Pā me te Pāreti

The case comes with three pre-installed ARGB fans (two side, one rear). Additional fans or radiators can be installed in the following locations:

• Runga: Supports 3 x 120mm or 2 x 140mm fans; 360mm or 280mm radiators.
• Taha: Supports 2 x 120mm or 2 x 140mm fans; 240mm radiators. (Pre-installed 2 x 120mm ARGB fans)
• Raro: Supports 3 x 120mm or 2 x 140mm fans.
• muri: Supports 1 x 120mm or 1 x 140mm fan; 120mm radiators. (Pre-installed 1 x 120mm ARGB fan)

Whakaahua: Roto view showing the pre-installed ARGB fans on the side and rear, illustrating fan placement.

6. Connecting Front I/O Ports and ARGB

Connect the following cables from the case to your motherboard:

• USB 2.0: Connect the USB 2.0 header cable.
• Momo-C: Connect the USB Type-C header cable (if your motherboard supports it).
• Ororongo HD: Connect the HD Audio header cable.
• Hiko/Tautuhi Anō/Ngā LED: Connect the front panel power, reset, HDD LED, and power LED cables according to your motherboard manual.
• ARGB Fans: Connect the ARGB fan cables to your motherboard's 5V ARGB header or to the integrated ARGB controller (if applicable). The case includes an LED Switch Button for controlling ARGB lighting if connected to the case's internal controller.

Whakaahua: Runga view of the case, showing the front I/O panel with USB ports and the LED switch button.

Mahi

Whakakaha ana

Once all components are installed and connected, close the side panels. Connect your monitor, keyboard, mouse, and power cable. Press the power button on the front panel of the case to start your system.

Mana Whakamārama ARGB

E rua ngā huarahi e taea ai te whakahaere i ngā pā hau ARGB kua tāutahia i mua:

• Pātene Whakawhiti LED: If the ARGB fans are connected to the case's internal controller, press the dedicated LED Switch Button on the front I/O panel to cycle through various lighting effects and colors.
• Pūmanawa Papa Matua: If the ARGB fans are connected directly to a compatible 5V ARGB header on your motherboard, you can control the lighting effects using your motherboard's proprietary RGB software (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, ASRock Polychrome Sync).

Te tiaki

Regular maintenance helps ensure optimal performance and longevity of your computer components.

• Tātari Puehu: The case features removable dust filters (e.g., on the top and bottom). Periodically remove and clean these filters with compressed air or water (ensure they are completely dry before reinstallation).
• Whakapai Take: Whakamahia he ngohengohe, damp cloth to clean the exterior surfaces of the case. For tempered glass panels, use a glass cleaner and a microfiber cloth. Avoid abrasive cleaners.
• Te Tango Puehu ā-roto: Every few months, open the case and use compressed air to remove dust from internal components, especially fan blades and heatsinks.

Raparongoā

Mena ka tūtaki koe ki ngā raruraru, whakaarohia ēnei otinga noa:

• Kāore te Pūnaha i te Hiko:
  • Me whakarite kei te tahuri te PSU, ā, kei te hono tika ki te putanga pakitara.
  • Me manatoko kei te hono pai ngā taura hiko katoa (ATX 24-pin, CPU, GPU, puku).
  • Check that the front panel power button cable is correctly connected to the motherboard.
• ARGB Fans Not Lighting Up/Spinning:
  • Confirm ARGB cables are securely connected to a 5V ARGB header on the motherboard or the case's controller.
  • Ensure fan power cables are connected to appropriate fan headers on the motherboard or PSU.
  • If using motherboard software, verify it is installed and configured correctly.
• Front I/O Ports Not Working:
  • Check that the USB and HD Audio cables from the front panel are correctly connected to their respective headers on the motherboard.

For persistent issues, consult your motherboard manual or contact GAMDIAS support.

Whakatakotoranga

Nga korero Whakaputanga

For detailed warranty terms and conditions, please refer to the official GAMDIAS webte waahi, te kaari whakamana ranei kei roto i to hua. Puritia to tohu hoko mo nga kereme whakamana.

Tautoko Kiritaki

If you require further assistance or have questions regarding your GAMDIAS Aura GC10m V2 WH computer case, please contact GAMDIAS customer support.

• Kaihanga: GAMDIAS TAIWAN
• Wāhi noho: No. 113, Jian 2nd Rd., Zhonghe, Dist., New Taipei City 235, Taiwan
• Kai kawemai (Inia): Allway Distributions Pvt Ltd, No-49, H.B. Samajha Road, Baswangudi , Bengaluru- 560004
• Hoapā Kawemai (Īnia): 8904307700
• Whaimana Webpae: www.gamdias.com (Tirohia koa te rangatira website for the most up-to-date support contact information and resources.)