1. Nga Korero Haumaru Nui
Please read all instructions carefully before using the Mayer MMIWD30-BY Instant Heating Water Dispenser. Retain this manual for future reference.
- Ensure the appliance is placed on a stable, flat, and heat-resistant surface.
- Kaua e rumakina te taputapu, te taura hiko, te mono ranei ki te wai, ki tetahi atu wai ranei.
- Kaua e taea e nga tamariki. Ko tenei taputapu ehara i te mea mo te whakamahi ma te hunga he iti te kaha o te tinana, o te tairongo, o te hinengaro ranei mena ka matakihia.
- Always unplug the dispenser from the power outlet before cleaning or when not in use.
- Kaua e whakahaerehia te taputapu mēnā kua pakaru te taura hiko, te mono rānei, mēnā rānei kei te hē te mahi a te taputapu, kua pakaru rānei i tētahi āhua.
- The appliance features boil dry and overheating protection. If the water tank is empty, the dispenser will automatically shut off.
- Whakamahia anake te wai inu i roto i te taika wai.
- Kia tūpato i te wā e ringihia ana te wai wera hei ārai i te wera.
2. Hua Neke Atuview
Familiarize yourself with the components of your Mayer Instant Heating Water Dispenser.
Whakaahua 1: Taha-mua view of the Mayer MMIWD30-BY Instant Heating Water Dispenser. The image shows the main unit with the water outlet on the left and the translucent water tank on the right. A drip tray is visible at the base.
Whakaahua 2: Taha view of the Mayer MMIWD30-BY Instant Heating Water Dispenser, illustrating the detachable water tank being removed or inserted. The ultrafiltration filter is visible inside the water tank.
Waehanga:
- Main Dispenser Unit (with water outlet and control panel)
- Detachable Water Tank (3L capacity)
- Ultrafiltration Filter (pre-installed in water tank)
- Paepae Rite Wewete
- Waea hiko
3. Tatūnga
Follow these steps for the initial setup of your water dispenser.
- Wewete: Me ata tango i nga taonga kapi katoa me te whakarite kei te noho katoa nga waahanga.
- Turanga: Place the dispenser on a stable, level, and dry surface, away from direct sunlight and heat sources. Ensure there is adequate ventilation around the unit.
- Puke Wai Ma: Before first use, remove the detachable water tank and rinse it thoroughly with clean water. The ultrafiltration filter is pre-installed; ensure it is securely in place.
- Whakakihia te Taaka Wai: Fill the water tank with potable water up to the maximum fill line. Reattach the water tank securely to the main unit.
- Whakatakoto Paepae Whakataka: Place the detachable drip tray onto its designated slot at the base of the dispenser.
- Hono Hono: Plug the power cord into a grounded electrical outlet. The dispenser will enter standby mode.
- Initial Flush (Recommended): For first-time use or after filter replacement, dispense at least 500ml of water at 99°C to flush the system. Discard this water.
4. Nga Tohutohu Whakahaere
Your Mayer MMIWD30-BY dispenser features a sensor touch control panel for easy operation.
Nga Mahi Paewhiri Mana:
- Pātene Hiko: To turn the dispenser on/off or enter standby mode.
- Tīpakonga Temperature: Cycle through preset temperatures: 25°C, 45°C, 65°C, 85°C, 99°C. Precise 1°C interval control is available within these ranges.
- Tīpakonga Rōrahi: Choose from preset cup sizes: 200ml, 350ml, 500ml.
- Patene Tuku: Press to start dispensing water.
- Maukati Tamariki: A safety feature to prevent accidental dispensing of hot water. Activate/deactivate by pressing and holding the child lock icon.
- Whakaatu LED: Shows selected temperature, volume, and status indicators.
Te wai tuku:
- Ensure the water tank is filled and the dispenser is plugged in.
- Place a cup or container on the drip tray directly under the water outlet.
- Select your desired water temperature using the temperature selection button.
- Select the desired water volume (200ml, 350ml, or 500ml) using the volume selection button.
- If the child lock is active, deactivate it.
- Press the dispense button. The dispenser will heat and dispense water in approximately 5 seconds.
- To stop dispensing before the selected volume is reached, press the dispense button again.
5. Tiaki
Regular cleaning and maintenance will ensure optimal performance and longevity of your dispenser.
Te horoi i te Paepae Whakarere:
The detachable drip tray should be emptied and cleaned regularly to prevent overflow and maintain hygiene.
- Carefully remove the drip tray from the dispenser.
- Ringihia te wai kua kohia.
- Wash the drip tray with mild soap and warm water. Rinse thoroughly.
- Dry completely before reattaching to the dispenser.
Water Tank and Filter Maintenance:
The ultrafiltration filter helps remove impurities and reduce limescale. The filter should be replaced periodically based on water quality and usage, typically every 3-6 months.
- Unplug the dispenser and remove the water tank.
- Tangohia te tātari tawhito mai i te puna wai.
- Clean the water tank with mild soap and water, then rinse thoroughly.
- Insert a new ultrafiltration filter securely into the water tank.
- Refill the tank with potable water and reattach it to the dispenser.
- Perform an initial flush as described in the Setup section.
Horoi o waho:
Horoia te taha o waho o te kaitapa ki te ngohengohe, damp kakahu. Kaua e whakamahi i nga kai horoi me nga whakarewa.
6. Te Raru
Tirohia tenei waahanga mo nga take noa me o raatau otinga.
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Kaore he wai i tukuna | Water tank is empty or not properly seated. Child lock is active. Dispense button not pressed. | Refill water tank and ensure it is seated correctly. Deactivate child lock. Press the dispense button. |
| Kaore i te wera te wai | Incorrect temperature selected. | Verify the desired temperature is selected on the control panel. Allow a few seconds for heating. |
| Low water level indicator is on | Water level in the tank is low. | Whakakiia ano te puna wai ki te wai inu. |
| Karekau te kaitahuri e huri ana | Not plugged in. Power outage. | Ensure the power cord is securely plugged into a working outlet. Check your household's power supply. |
| He rerekē te reka o te wai | New filter or filter needs replacement. | Perform an initial flush if it's a new filter. Replace the ultrafiltration filter if it's old. |
Mena kei te haere tonu te raru i muri i te whakamatau i enei otinga, tena koa whakapā atu ki te tautoko a te kaihoko.
7. Whakatakotoranga
| Āhuahira | Whakatakotoranga |
|---|---|
| Waitohu | Mayer |
| Tauira | MMIWD30-BY |
| Te kaha | 3 rita |
| Voltage | 2200 Volts |
| Rauemi | Kirihou |
| Rahi Hua (L x W x H) | 26L x 14.4W x 29.5H henimita |
| Nga waahanga motuhake | Ultrafiltration Filter, Instant Heating, Child Lock, Detachable Drip Tray, Low Water Level Indicator, Boil Dry and Overheating Protection |
| Mahana Tatūkē | 25°C, 45°C, 65°C, 85°C, 99°C (with 1°C interval control) |
| Preset Volumes | 200ml, 350ml, 500ml |
| Te Wa Whakawera | Tata ki te 5 hēkona |
8. Pūtāhui me te Tautoko
Specific warranty terms and conditions for the Mayer MMIWD30-BY Instant Heating Water Dispenser are not provided in this document. For detailed warranty information, product registration, or technical support, please refer to the warranty card included with your purchase or contact Mayer customer service directly.
Please have your model number (MMIWD30-BY) and proof of purchase ready when contacting support.
